PIV Measurement Line1. Point coordinates in the draft tube. The global location (0,0,0) is the same as shown in Figures 1 and 2.

Point	X [mm]	Y [mm]	Z[mm] 
#101 	  25.96 	 133.55 	 -338.60 
#102 	  24.05 	 123.74 	 -338.60 
#103 	  22.14 	 113.92 	 -338.60 
#104 	  20.24 	 104.10 	 -338.60 
#105 	  18.33 	  94.29 	 -338.60 
#106 	  16.42 	  84.47 	 -338.60 
#107 	  14.51 	  74.66 	 -338.60 
#108 	  12.60 	  64.84 	 -338.60 
#109 	  10.70 	  55.02 	 -338.60 
#110 	   8.79 	  45.21 	 -338.60 
#111 	   6.88 	  35.39 	 -338.60 
#112 	   4.97 	  25.57 	 -338.60 
#113 	   3.06 	  15.76 	 -338.60 
#114 	   1.16 	   5.94 	 -338.60 
#115 	  -0.75 	  -3.87 	 -338.60 
#116 	  -2.66 	 -13.69 	 -338.60 
#117 	  -4.57 	 -23.51 	 -338.60 
#118 	  -6.48 	 -33.32 	 -338.60 
#119 	  -8.39 	 -43.14 	 -338.60 
#120 	 -10.29 	 -52.96 	 -338.60 
#121 	 -12.20 	 -62.77 	 -338.60 
#122 	 -14.11 	 -72.59 	 -338.60 
#123 	 -16.02 	 -82.40 	 -338.60 
#124 	 -17.93 	 -92.22 	 -338.60 
#125 	 -19.83 	 -102.04 	 -338.60 
#126 	 -21.74 	 -111.85 	 -338.60 
#127 	 -23.65 	 -121.67 	 -338.60 
#128 	 -25.56 	 -131.49 	 -338.60