Cato Dørum
Publications
2022
-
Bunaziv, Ivan;
Langelandsvik, Geir;
Ren, Xiaobo;
Westermann, Ida;
Rørvik, Gisle;
Dørum, Cato;
Danielsen, Morten Høgseth;
Eriksson, Magnus Carl Fredrik.
(2022)
Effect of preheating and preplaced filler wire on microstructure and toughness in laser-arc hybrid welding of thick steel.
Journal of Manufacturing Processes.
volum 82.
Academic article
2020
-
Bunaziv, Ivan;
Dørum, Cato;
Nielsen, Steen Erik;
Suikkanen, Pasi;
Ren, Xiaobo;
Nyhus, Bård;
Eriksson, Magnus Carl Fredrik;
Akselsen, Odd Magne.
(2020)
Laser-arc hybrid welding of 12- and 15-mm thick structural steel.
The International Journal of Advanced Manufacturing Technology.
volum 107.
Academic article
2019
-
Knudsen, Ole Øystein;
Matre, Håkon;
Dørum, Cato;
Gagné, Martin.
(2019)
Experiences with Thermal Spray Zinc Duplex Coatings on Road Bridges.
Coatings.
volum 9 (6).
Academic article
2018
-
Sha, Yanyan;
Amdahl, Jørgen;
Dørum, Cato;
Yu, Zhaolong.
(2018)
Numerical Investigation of the Collision Damage and Residual Strength of a Floating Bridge Girder.
ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering - Volume 11A: Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering.
Academic chapter/article/Conference paper
2015
-
Hamou, Faycal Riad;
Dalsjø, Per G.;
Dørum, Cato;
Helland, Susanne;
Kristiansen, Helge;
Taklo, Maaike Margrete Visser;
Gakkestad, Jakob.
(2015)
Numerical investigation of ceramic package/ interposer interconnects using isotropic conductive adhesive.
16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems 2015 (EuroSimE), Budapest. 19-22 April 2015.
Academic chapter/article/Conference paper
2014
-
Aursand, Eskil;
Dørum, Cato;
Hammer, Morten;
Morin, Alexandre;
Munkejord, Svend Tollak;
Nordhagen, Håkon Ottar.
(2014)
CO2 Pipeline Integrity: Comparison of a Coupled Fluid-structure Model and Uncoupled Two-curve Methods.
Energy Procedia.
volum 51.
Academic article
-
Moxnes, John Fredrik;
Prytz, Anne K.;
Frøyland, Øyvind;
Klokkehaug, Siri;
Skriudalen, Stian;
Friis, Eva;
Teland, Jan Arild;
Dørum, Cato;
Ødegårdstuen, Gard.
(2014)
Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques.
Defence Technology.
volum 10 (2).
Academic article
2013
-
Aursand, Eskil;
Aursand, Peder;
Berstad, Torodd;
Dørum, Cato;
Hammer, Morten;
Munkejord, Svend Tollak;
Nordhagen, Håkon Ottar.
(2013)
CO2 pipeline integrity: A coupled fluid-structure model using a reference equation of state for CO2.
Energy Procedia.
volum 37.
Academic article
-
Mølnvik, Mona J.;
Munkejord, Svend Tollak;
Dørum, Cato.
(2013)
Klimaløsning i rør.
Dagens næringsliv.
Popular scientific article
2012
-
Nordhagen, Håkon Ottar;
Kragset, Steinar;
Berstad, Torodd;
Morin, Alexandre;
Dørum, Cato;
Munkejord, Svend Tollak.
(2012)
A new coupled fluid-structure modeling methodology for running ductile fracture.
Computers & structures.
volum 94-95.
Academic article
2011
-
Berstad, Torodd;
Dørum, Cato;
Jakobsen, Jana Poplsteinova;
Kragset, Steinar;
Li, Hailong;
Lund, Halvor;
Morin, Alexandre;
Munkejord, Svend Tollak;
Mølnvik, Mona Jacobsen;
Nordhagen, Håkon Ottar;
Østby, Erling.
(2011)
CO2 pipeline integrity: A new evaluation methodology.
Energy Procedia.
volum 4.
Academic article
2010
-
Dørum, Cato;
Lademo, Odd-Geir;
Myhr, Ole Runar;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Finite element analysis of plastic failure in heat-affected zone of welded aluminium connections.
Computers & structures.
volum 88 (9-10).
Academic article
-
Dørum, Cato;
Munkejord, Svend Tollak;
Mølnvik, Mona J..
(2010)
Sikker og effektiv CO2-transport.
Teknisk Ukeblad.
volum 157 (25).
Popular scientific article
-
Fagerholt, Egil;
Dørum, Cato;
Børvik, Tore;
Laukli, Hans Ivar;
Hopperstad, Odd Sture.
(2010)
Experimental and numerical investigation of fracture in a cast aluminium alloy.
International Journal of Solids and Structures.
volum 47 (24).
Academic article
2009
-
Dørum, Cato;
Dispinar, D.;
Hopperstad, Odd Sture;
Berstad, Torodd.
(2009)
A probabilistic approach for modelling of fracture in magnesium die-castings.
La Metallurgia Italiana.
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Berstad, Torodd;
Dispinar, D.
(2009)
Numerical modelling of magnesium die-castings using stochastic fracture parameters.
Engineering Fracture Mechanics.
volum 76 (14).
Academic article
-
Dørum, Cato;
Laukli, Hans Ivar;
Hopperstad, Odd Sture.
(2009)
Through-process numerical simulations of the structural behaviour of Al-Si die-castings.
Computational Materials Science.
volum 46 (1).
Academic article
-
Dørum, Cato;
Laukli, Hans Ivar;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2009)
Structural behaviour of Al-Si die-castings: Experiments and numerical simulations.
European Journal of Mechanics. A, Solids.
volum 28 (1).
Academic article
2008
-
Laukli, Hans Ivar;
Dørum, Cato.
(2008)
Through-process Modelling of Al-Si Die-Castings.
11th. International Conference on Aluminium Alloys.
Other
-
Reyes, Aase Gavina Roberg;
Dørum, Cato;
Hopperstad, Odd Sture;
Langseth, Magnus;
Lademo, Odd-Geir;
Eriksson, Magnus.
(2008)
Validation study of failure prediction in crash analysis.
Proceedings of The Ninth International Conference on Computational Structures Technology.
Academic chapter/article/Conference paper
2007
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2007)
Energy absorption capacity for thin-walled AM60 castings using a shear-bolt principle.
Computers & structures.
volum 85 (1 - 2).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2007)
Numerical modelling of the structural behaviour of thin-walled cast magnesium components using a through-process approach.
Materials & design.
volum 28 (10).
Academic article
2006
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2006)
An experimental study on the energy absorption capacity of thin-walled castings.
International Journal of Impact Engineering.
volum 32 (5).
Academic article
2005
-
Dørum, Cato.
(2005)
Behaviour and modelling of thin-walled cast components.
2005. ISBN 82-471-7140-6.
Doctoral dissertation
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus;
Sannes, Stian.
(2005)
Energy Absorption Capacity for HPDC components.
SAE 2004 Transactions Journal of Materials & Manufacturing.
Academic chapter/article/Conference paper
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus;
Sannes, Stian.
(2005)
Numerical Modelling of the Structural Behavior of Thin-Walled Cast Magnesium Components Using a Through-Process Approach.
SAE 2005 World Congress (SP-1947).
Academic chapter/article/Conference paper
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2005)
Numerical modelling of the structural behaviour of thin-walled cast magnesium components.
International Journal of Solids and Structures.
volum 42 (7).
Academic article
2003
-
Dørum, Cato;
Hopperstad, Odd Sture;
Langseth, Magnus;
Lademo, Odd-Geir.
(2003)
Aluminium and magnesium castings - experimental work and numerical analysis.
International Journal of Crashworthiness.
volum 8.
Academic article
Journal publications
-
Bunaziv, Ivan;
Langelandsvik, Geir;
Ren, Xiaobo;
Westermann, Ida;
Rørvik, Gisle;
Dørum, Cato;
Danielsen, Morten Høgseth;
Eriksson, Magnus Carl Fredrik.
(2022)
Effect of preheating and preplaced filler wire on microstructure and toughness in laser-arc hybrid welding of thick steel.
Journal of Manufacturing Processes.
volum 82.
Academic article
-
Bunaziv, Ivan;
Dørum, Cato;
Nielsen, Steen Erik;
Suikkanen, Pasi;
Ren, Xiaobo;
Nyhus, Bård;
Eriksson, Magnus Carl Fredrik;
Akselsen, Odd Magne.
(2020)
Laser-arc hybrid welding of 12- and 15-mm thick structural steel.
The International Journal of Advanced Manufacturing Technology.
volum 107.
Academic article
-
Knudsen, Ole Øystein;
Matre, Håkon;
Dørum, Cato;
Gagné, Martin.
(2019)
Experiences with Thermal Spray Zinc Duplex Coatings on Road Bridges.
Coatings.
volum 9 (6).
Academic article
-
Aursand, Eskil;
Dørum, Cato;
Hammer, Morten;
Morin, Alexandre;
Munkejord, Svend Tollak;
Nordhagen, Håkon Ottar.
(2014)
CO2 Pipeline Integrity: Comparison of a Coupled Fluid-structure Model and Uncoupled Two-curve Methods.
Energy Procedia.
volum 51.
Academic article
-
Moxnes, John Fredrik;
Prytz, Anne K.;
Frøyland, Øyvind;
Klokkehaug, Siri;
Skriudalen, Stian;
Friis, Eva;
Teland, Jan Arild;
Dørum, Cato;
Ødegårdstuen, Gard.
(2014)
Experimental and numerical study of the fragmentation of expanding warhead casings by using different numerical codes and solution techniques.
Defence Technology.
volum 10 (2).
Academic article
-
Aursand, Eskil;
Aursand, Peder;
Berstad, Torodd;
Dørum, Cato;
Hammer, Morten;
Munkejord, Svend Tollak;
Nordhagen, Håkon Ottar.
(2013)
CO2 pipeline integrity: A coupled fluid-structure model using a reference equation of state for CO2.
Energy Procedia.
volum 37.
Academic article
-
Mølnvik, Mona J.;
Munkejord, Svend Tollak;
Dørum, Cato.
(2013)
Klimaløsning i rør.
Dagens næringsliv.
Popular scientific article
-
Nordhagen, Håkon Ottar;
Kragset, Steinar;
Berstad, Torodd;
Morin, Alexandre;
Dørum, Cato;
Munkejord, Svend Tollak.
(2012)
A new coupled fluid-structure modeling methodology for running ductile fracture.
Computers & structures.
volum 94-95.
Academic article
-
Berstad, Torodd;
Dørum, Cato;
Jakobsen, Jana Poplsteinova;
Kragset, Steinar;
Li, Hailong;
Lund, Halvor;
Morin, Alexandre;
Munkejord, Svend Tollak;
Mølnvik, Mona Jacobsen;
Nordhagen, Håkon Ottar;
Østby, Erling.
(2011)
CO2 pipeline integrity: A new evaluation methodology.
Energy Procedia.
volum 4.
Academic article
-
Dørum, Cato;
Lademo, Odd-Geir;
Myhr, Ole Runar;
Berstad, Torodd;
Hopperstad, Odd Sture.
(2010)
Finite element analysis of plastic failure in heat-affected zone of welded aluminium connections.
Computers & structures.
volum 88 (9-10).
Academic article
-
Dørum, Cato;
Munkejord, Svend Tollak;
Mølnvik, Mona J..
(2010)
Sikker og effektiv CO2-transport.
Teknisk Ukeblad.
volum 157 (25).
Popular scientific article
-
Fagerholt, Egil;
Dørum, Cato;
Børvik, Tore;
Laukli, Hans Ivar;
Hopperstad, Odd Sture.
(2010)
Experimental and numerical investigation of fracture in a cast aluminium alloy.
International Journal of Solids and Structures.
volum 47 (24).
Academic article
-
Dørum, Cato;
Dispinar, D.;
Hopperstad, Odd Sture;
Berstad, Torodd.
(2009)
A probabilistic approach for modelling of fracture in magnesium die-castings.
La Metallurgia Italiana.
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Berstad, Torodd;
Dispinar, D.
(2009)
Numerical modelling of magnesium die-castings using stochastic fracture parameters.
Engineering Fracture Mechanics.
volum 76 (14).
Academic article
-
Dørum, Cato;
Laukli, Hans Ivar;
Hopperstad, Odd Sture.
(2009)
Through-process numerical simulations of the structural behaviour of Al-Si die-castings.
Computational Materials Science.
volum 46 (1).
Academic article
-
Dørum, Cato;
Laukli, Hans Ivar;
Hopperstad, Odd Sture;
Langseth, Magnus.
(2009)
Structural behaviour of Al-Si die-castings: Experiments and numerical simulations.
European Journal of Mechanics. A, Solids.
volum 28 (1).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2007)
Energy absorption capacity for thin-walled AM60 castings using a shear-bolt principle.
Computers & structures.
volum 85 (1 - 2).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2007)
Numerical modelling of the structural behaviour of thin-walled cast magnesium components using a through-process approach.
Materials & design.
volum 28 (10).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2006)
An experimental study on the energy absorption capacity of thin-walled castings.
International Journal of Impact Engineering.
volum 32 (5).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus.
(2005)
Numerical modelling of the structural behaviour of thin-walled cast magnesium components.
International Journal of Solids and Structures.
volum 42 (7).
Academic article
-
Dørum, Cato;
Hopperstad, Odd Sture;
Langseth, Magnus;
Lademo, Odd-Geir.
(2003)
Aluminium and magnesium castings - experimental work and numerical analysis.
International Journal of Crashworthiness.
volum 8.
Academic article
Part of book/report
-
Sha, Yanyan;
Amdahl, Jørgen;
Dørum, Cato;
Yu, Zhaolong.
(2018)
Numerical Investigation of the Collision Damage and Residual Strength of a Floating Bridge Girder.
ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering - Volume 11A: Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering.
Academic chapter/article/Conference paper
-
Hamou, Faycal Riad;
Dalsjø, Per G.;
Dørum, Cato;
Helland, Susanne;
Kristiansen, Helge;
Taklo, Maaike Margrete Visser;
Gakkestad, Jakob.
(2015)
Numerical investigation of ceramic package/ interposer interconnects using isotropic conductive adhesive.
16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems 2015 (EuroSimE), Budapest. 19-22 April 2015.
Academic chapter/article/Conference paper
-
Laukli, Hans Ivar;
Dørum, Cato.
(2008)
Through-process Modelling of Al-Si Die-Castings.
11th. International Conference on Aluminium Alloys.
Other
-
Reyes, Aase Gavina Roberg;
Dørum, Cato;
Hopperstad, Odd Sture;
Langseth, Magnus;
Lademo, Odd-Geir;
Eriksson, Magnus.
(2008)
Validation study of failure prediction in crash analysis.
Proceedings of The Ninth International Conference on Computational Structures Technology.
Academic chapter/article/Conference paper
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus;
Sannes, Stian.
(2005)
Energy Absorption Capacity for HPDC components.
SAE 2004 Transactions Journal of Materials & Manufacturing.
Academic chapter/article/Conference paper
-
Dørum, Cato;
Hopperstad, Odd Sture;
Lademo, Odd-Geir;
Langseth, Magnus;
Sannes, Stian.
(2005)
Numerical Modelling of the Structural Behavior of Thin-Walled Cast Magnesium Components Using a Through-Process Approach.
SAE 2005 World Congress (SP-1947).
Academic chapter/article/Conference paper
Report
-
Dørum, Cato.
(2005)
Behaviour and modelling of thin-walled cast components.
2005. ISBN 82-471-7140-6.
Doctoral dissertation
Media
2013
-
Academic lectureAursand, Eskil; Dørum, Cato; Hammer, Morten; Morin, Alexandre; Munkejord, Svend Tollak; Nordhagen, Håkon Ottar. (2013) CO2 pipeline integrity: Comparison of a coupled fluid-structure model and uncoupled two-curve methods. The 7th Trondheim CCS Conference . BIGCCS, SINTEF Energy Research; Trondheim. 2013-06-04 - 2013-06-06.
-
Academic lectureNordhagen, Håkon Ottar; Dørum, Cato; Munkejord, Svend Tollak; Hammer, Morten; Morin, Alexandre; Aursand, Eskil. (2013) Influence of the CO2 phase boundary on ductile fracture velocity. The Fourth International Forum on Transportation of CO2 by Pipeline . Clarion; Newcastle. 2013-06-19 - 2013-06-20.
2012
-
PosterAursand, Eskil; Aursand, Peder Kristian; Berstad, Torodd; Dørum, Cato; Hammer, Morten; Munkejord, Svend Tollak; Nordhagen, Håkon Ottar. (2012) CO2 pipeline integrity: A coupled fluid-structure model using a reference equation of state for CO2. GHGT-11 -- 11th International Conference on Greenhouse Gas Technologies . RITE / IEAGHGT; Kyoto. 2012-11-18 - 2012-11-22.
-
Academic lectureNordhagen, Håkon Ottar; Aursand, Peder; Dørum, Cato; Berstad, Torodd; Hammer, Morten; Munkejord, Svend Tollak. (2012) Coupled fluid-structure simulation of running fractures in CO2 pipelines. The Third International Forum on Transportation of CO2 by Pipeline . Tiratsoo Technical; Newcastle Upon Tyme. 2012-06-20 - 2012-06-21.
2010
-
PosterBerstad, Torodd; Dørum, Cato; Jakobsen, Jana Poplsteinova; Kragset, Steinar; Li, Hailong; Lund, Halvor; Morin, Alexandre; Munkejord, Svend Tollak; Mølnvik, Mona J.; Nordhagen, Håkon Ottar; Østby, Erling. (2010) CO2 pipeline integrity: A new evaluation methodology. GHGT-10 – 10th International Conference on Greenhouse Gas Control Technologies . IEAGHGT; Amsterdam. 2010-09-19 - 2010-09-23.
-
Academic lectureNordhagen, Håkon Ottar; Berstad, Torodd; Dørum, Cato; Kragset, Steinar; Lund, Halvor; Morin, Alexandre; Munkejord, Svend Tollak; Østby, Erling. (2010) Simulering av løpende brudd i rørledninger med høyt trykk. NPF, Offshore rørledninger/stigerør . NPF; Trondheim. 2010-10-19 - 2010-10-20.
-
Academic lectureNordhagen, Håkon Ottar; Dørum, Cato; Kragset, Steinar; Lund, Halvor; Munkejord, Svend Tollak; Østby, Erling. (2010) Simulering av løpende brudd i rørledninger med høyt trykk. Offshore rørledninger . NPF; Trondheim. 2010-10-19 - 2010-10-20.
2008
-
Academic lectureDørum, Cato; Hopperstad;, O.S.; Berstad, Torodd; laukli;, H. (2008) A probabilistic approach for modelling of fracture in die-casting. 8th. World Congress on Computational Mechanics (WCCM8) ; Italy. 2008-06-30 - 2008-07-04.
-
Academic lectureDørum, Cato; Østby, Erling; Berstad, Torodd; Popescu;, C; Thaulow;, C. (2008) Numerical simulation of crack-arrest in high pressure pipelines. ”. 8th International Welding Symposium ; Kyoto, Japan. 2008-11-16 - 2008-11-18.
-
Academic lectureLaukli, Hans Ivar; Dørum, Cato. (2008) Through-process Modelling of Al-Si Die-Castings. International Conference on Aluminium Alloys ; 2008-09-22 - 2008-09-26.
-
Academic lectureLaukli;, H.I; Dørum, Cato. (2008) Through-process Modelling of Al-Si Die-Castings. 11th International Conference on Aluminium ; Germany. 2008-09-22 - 2008-09-26.
-
PosterReyes, Aase Gavina Roberg; Dørum, Cato; Hopperstad, Odd Sture; Langseth, Magnus; Lademo, Odd-Geir; Eriksson, Magnus. (2008) Validation of one failure prediction approach in crash analysis. International Conference Impact Loading of Impact Structures ; 2008-06-17 - 2008-06-19.
-
Academic lectureReyes, Aase Gavina Roberg; Dørum, Cato; Hopperstad, Odd Sture; Langseth, Magnus; Lademo, Odd-Geir; Eriksson, Magnus. (2008) Validation study of failure prediction in crash analysis. The Ninth International Conference on Computational Structures Technology ; Athen. 2008-09-02 - 2008-09-05.
-
Academic lectureReyes;, A; Dørum, Cato; Hopperatd;, O.S; Langseth;, M; Lademo, Odd-Geir; Eriksson, Magnus. (2008) Validation study of failure prediction in crash analysis. of The Ninth International Conference on Computational Structures Technology . Civil-Comp Press; UK. 2008-09-02 - 2008-09-05.
2005
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus; Sannes, Stian. (2005) Numerical Modelling of the Structural Behaviour of Thin-Walled Cast Magnesium Components Using a Through-Process Approach. 2005 SAE World Congress . SAE; Detroit. 2005-04-11 - 2005-04-14.
-
Academic lectureSannes, Stian; Dørum, Cato; Lohne, Otto; Gjestland, H; Westengen, H.. (2005) The Use of Quality Mapping to Predict Performance of Thin-Walled Magnesium Die Castings. 2005 SAE World Congress . SAE; Detroit. 2005-04-11 - 2005-04-14.
2004
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus. (2004) Behaviour and modelling of thin-walled cast components in magnesium and aluminium. International Symposium Crashworthiness of Light-Weight Automotive Structures . NTNU; Trondheim. 2004-06-17 - 2004-06-18.
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus. (2004) Energy absorption of HPDC components. 2004 SAE World Congress . SAE; Detroit. 2004-03-08 - 2004-03-11.
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus. (2004) Structural behaviour of thin-walled cast magneisum components. HPDC Seminar 2004 . NTNU; Trondheim. 2004-11-30 - 2004-12-01.
2003
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus; sannes, stian. (2003) Cast magnesium safety components - energy absorption capaacity. 6th International Conference and Exhibition on Magnesium Alloys and their Applications . [Mangler data]; Wolfsburg, Tyskland. 2003-11-20.
-
Academic lectureDørum, Cato; Hopperstad, Odd Sture; Langseth, Magnus; Lademo, Odd-Geir; sannes, stian. (2003) Cast magnesium safety components - experimental work and numerical simulations. International Crashworthiness and Design Symposium 2003 . [Mangler data]; Lille, Frankrike. 2003-12-04.
-
PosterDørum, Cato; Lademo, Odd-Geir; Hopperstad, Odd Sture; Langseth, Magnus. (2003) Crashworthiness of cast components. NorLight konferansen 2003 . [Mangler data]; Trondheim. 2003-01-28.
-
Academic lecturesannes, stian; Svalestuen, Jørild M.; Dørum, Cato; Lademo, Odd-Geir. (2003) Die Casting of Magnesium Alloys - Crash Requirements and Testing of Part Performance. 11th Magnesium Automotive and End User Seminar . [Mangler data]; Aalen, Tyskland. 2003-09-26.
2001
-
Academic lectureLademo, Odd-Geir; Dørum, Cato; Langseth, Magnus; Hopperstad, Odd Sture. (2001) Modelling Crash Behaviour of HIPDC Components. Seminar on High Pressure Die Casting of Light Alloys . [Mangler data]; Dep. of Materials Technology and Electro Chemistry, NTNU, Trondheim. 2001-11-28.
-
Academic lectureLademo, Odd-Geir; Dørum, Cato; Langseth, Magnus; Hopperstad, Odd Sture. (2001) On the Crashworthiness Modelling of Aluminium and Magnesium Castings. Materials Week . [Mangler data]; Munchen, Germany. 2001-10-04.