Navigation

  • Skip to Content
NTNU Home

ntnu.edu

  • Studies
    • Master's programmes in English
    • For exchange students
    • PhD opportunities
    • All programmes of study
    • Courses
    • Financing
    • Language requirements
    • Application process
    • Academic calendar
    • FAQ
  • Research and innovation
    • NTNU research
    • Research excellence
    • Strategic research areas
    • Innovation resources
    • PhD opportunities
  • Life and housing
    • Student in Trondheim
    • Student in Gjøvik
    • Student in Ålesund
    • For researchers
    • Life and housing
  • About NTNU
    • Contact us
    • Faculties and departments
    • Libraries
    • International researcher support
    • Vacancies
    • About NTNU
    • Maps
  1. Home
  2. Employees

Språkvelger

Norsk

David Morin

David Morin

Associate Professor
Department of Structural Engineering

david.morin@ntnu.no
+4773591300 +4746542691 Materialteknisk, mar.49, Gløshaugen, Richard Birkelands vei 1a
SIMLab
Publications Teaching Media

Publications

  • Chronological
  • By category
  • See all publications in Cristin

2022

  • Dæhli, Lars Edvard Blystad; Tekoglu, Cihan; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2022) Ductile failure predictions using micromechanically-based computational models. Journal of the Mechanics and Physics of Solids. volum 164.
    Academic article
  • Hoang, Nguyen-Hieu; Morin, David; Langseth, Magnus. (2022) Testing and modelling of butt-welded connections in thin-walled aluminium structures. Thin-walled structures. volum 171.
    Academic article

2021

  • Bergo, Sondre; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2021) Micromechanical modelling of ductile fracture in pipeline steel using a bifurcation-enriched porous plasticity model. International Journal of Fracture. volum 227 (1).
    Academic article
  • Bergo, Sondre; Morin, David; Hopperstad, Odd Sture. (2021) Numerical implementation of a non-local GTN model for explicit FE simulation of ductile damage and fracture. International Journal of Solids and Structures. volum 219-220.
    Academic article
  • Costas, Miguel; Morin, David; Sønstabø, Johan Kolstø; Langseth, Magnus. (2021) On the effect of pilot holes on the mechanical behaviour of flow-drill screw joints. Experimental tests and mesoscale numerical simulations. Journal of Materials Processing Technology. volum 294.
    Academic article
  • Espeseth, Vetle; Morin, David; Faleskog, Jonas; Børvik, Tore; Hopperstad, Odd Sture. (2021) A numerical study of a size-dependent finite-element based unit cell with primary and secondary voids. Journal of the Mechanics and Physics of Solids. volum 157.
    Academic article
  • Granum, Henrik; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2021) Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy. International Journal of Mechanical Sciences. volum 192.
    Academic article
  • Holmström, Petter Henrik; Clausen, Arild Holm; Berstad, Torodd; Morin, David; Hopperstad, Odd Sture. (2021) A pragmatic orthotropic elasticity-based damage model with spatially distributed properties applied to short glass-fibre reinforced polymers. International Journal of Solids and Structures. volum 230-231.
    Academic article
  • Reil, Matthias; Morin, David; Langseth, Magnus; Knoll, Octavian. (2021) A novel tests set-up for validation of connector models subjected to static and impact loadings. International Journal of Impact Engineering. volum 158.
    Academic article

2020

  • Bergo, Sondre; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) Micromechanics-based identification of a ductile fracture model for three structural steels. Engineering Fracture Mechanics. volum 224 (106803).
    Academic article
  • Costas, Miguel; Morin, David; de Lucio, Mario; Langseth, Magnus. (2020) Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading. European Journal of Mechanics. A, Solids. volum 81.
    Academic article
  • Costas, Miguel; Morin, David; Hopperstad, Odd Sture; Børvik, Tore; Langseth, Magnus. (2020) Corrigendum to “A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations” [Journal of the Mechanics and Physics of Solids 123 (2019) 190–206]. Journal of the Mechanics and Physics of Solids. volum 135.
    Errata
  • Dæhli, Lars Edvard Blystad; Morin, David; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2020) A Numerical Study on Ductile Failure of Porous Ductile Solids With Rate-Dependent Matrix Behavior. Journal of applied mechanics. volum 87 (3).
    Academic article
  • Erice, Borja; Perez-Martin, Maria Jesus; Kristoffersen, Martin; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) Fracture mechanisms in largely strained solids due to surface instabilities. International Journal of Solids and Structures. volum 199.
    Academic article
  • Frodal, Bjørn Håkon; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys. International Journal of Solids and Structures. volum 188-189.
    Academic article

2019

  • Berntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2019) Experimental investigation and numerical modelling of the mechanical response of a semi-structural polyurethane adhesive. International Journal of Adhesion and Adhesives. volum 95.
    Academic article
  • Costas, Miguel; Morin, David; Hopperstad, Odd Sture; Børvik, Tore; Langseth, Magnus. (2019) A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations. Journal of the Mechanics and Physics of Solids. volum 123.
    Academic article
  • Granum, Henrik; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Simulation of blast-loaded aluminium plates with crack-like defects. MekIT’19 - 10th National Conference on Computational Mechanics (Trondheim, Norway, 3-4 June 2019).
    Academic chapter/article
  • Khadyko, Mikhail; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Tensile ductility of extruded aluminium alloy AA6063 in different tempers. Materials Science & Engineering: A. volum 744.
    Academic article
  • Morin, David; Dæhli, Lars Edvard; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2019) Numerical study of ductile failure under non-proportional loading. European Journal of Mechanics. A, Solids. volum 74.
    Academic article

2018

  • Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2018) A Lode-dependent Gurson model motivated by unit cell analyses. Engineering Fracture Mechanics. volum 190.
    Academic article
  • Morin, David; Fourmeau, Marion; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2018) Anisotropic tensile failure of metals by the strain localization theory: An application to a high-strength aluminium alloy. European Journal of Mechanics. A, Solids. volum 69.
    Academic article
  • Morin, David; Hopperstad, Odd Sture; Benallal, Ahmed. (2018) On the description of ductile fracture in metals by the strain localization theory. International Journal of Fracture. volum 209 (1-2).
    Academic article
  • Reil, Matthias; Morin, David; Langseth, Magnus; Knoll, Octavian. (2018) Connections between steel and aluminium using adhesive bonding combined with self-piercing riveting. The European Physical Journal Conferences. volum 183.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2018) Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections. International Journal of Impact Engineering. volum 115.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2018) Testing and modelling of flow-drill screw connections under quasi-static loadings. Journal of Materials Processing Technology. volum 255.
    Academic article

2017

  • Costas, Miguel; Morin, David; Langseth, Magnus; Díaz, Jacobo M.; Romera, Luis Esteban. (2017) Static crushing of aluminium tubes filled with PET foam and a GFRP skeleton. Numerical modelling and multiobjective optimization. International Journal of Mechanical Sciences. volum 131-132.
    Academic article
  • Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2017) Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials. Journal of the Mechanics and Physics of Solids. volum 107.
    Academic article
  • Gruben, Gaute; Morin, David; Langseth, Magnus; Hopperstad, Odd Sture. (2017) Ductile Fracture of Steel Sheets under Dynamic Membrane Loading. Procedia Engineering. volum 197.
    Academic article
  • Gruben, Gaute; Morin, David; Langseth, Magnus; Hopperstad, Odd Sture. (2017) Strain localization and ductile fracture in advanced high-strength steel sheets. European Journal of Mechanics. A, Solids. volum 61.
    Academic article
  • Gruben, Gaute; Sølvernes, Sindre Hellem; Berstad, Torodd; Morin, David; Hopperstad, Odd Sture; Langseth, Magnus. (2017) Low-velocity impact behaviour and failure of stiffened steel plates. Marine Structures. volum 54.
    Academic article
  • Morin, David; Kårstad, Bente Larsen; Skajaa, Birgitte; Hopperstad, Odd Sture; Langseth, Magnus. (2017) Testing and modelling of stiffened aluminium panels subjected to quasi-static and low-velocity impact loading. International Journal of Impact Engineering. volum 110.
    Academic article

2016

  • Costas, Miguel; Morin, David; Langseth, Magnus; Romera, Luis Esteban; Díaz, Jacobo M.. (2016) Axial crushing of aluminum extrusions filled with PET foam and GFRP. An experimental investigation. Thin-walled structures. volum 99.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David Didier; Langseth, Magnus. (2016) Macroscopic modelling of Flow-Drill Screw connections. Key Engineering Materials. volum 710.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2016) Macroscopic modelling of flow-drill screw connections in thin-walled aluminium structures. Thin-walled structures. volum 105.
    Academic article

2015

  • Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik; Morin, David; Langseth, Magnus. (2015) Macroscopic strength and failure properties of flow-drill screw connections. Journal of Materials Processing Technology. volum 222.
    Academic article

2014

  • Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik; Morin, David; Langseth, Magnus. (2014) Behaviour of Flow-Drilling Screw Connections. Materials Science Forum. volum 794-796.
    Academic article

2013

  • Morin, David; Bourel, B; Bennani, B; Lauro, F; Lesueur, D. (2013) A new cohesive element for structural bonding modelling under dynamic loading. International Journal of Impact Engineering. volum 53.
    Academic article

Scientific articles

  • Dæhli, Lars Edvard Blystad; Tekoglu, Cihan; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2022) Ductile failure predictions using micromechanically-based computational models. Journal of the Mechanics and Physics of Solids. volum 164.
    Academic article
  • Hoang, Nguyen-Hieu; Morin, David; Langseth, Magnus. (2022) Testing and modelling of butt-welded connections in thin-walled aluminium structures. Thin-walled structures. volum 171.
    Academic article
  • Bergo, Sondre; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2021) Micromechanical modelling of ductile fracture in pipeline steel using a bifurcation-enriched porous plasticity model. International Journal of Fracture. volum 227 (1).
    Academic article
  • Bergo, Sondre; Morin, David; Hopperstad, Odd Sture. (2021) Numerical implementation of a non-local GTN model for explicit FE simulation of ductile damage and fracture. International Journal of Solids and Structures. volum 219-220.
    Academic article
  • Costas, Miguel; Morin, David; Sønstabø, Johan Kolstø; Langseth, Magnus. (2021) On the effect of pilot holes on the mechanical behaviour of flow-drill screw joints. Experimental tests and mesoscale numerical simulations. Journal of Materials Processing Technology. volum 294.
    Academic article
  • Espeseth, Vetle; Morin, David; Faleskog, Jonas; Børvik, Tore; Hopperstad, Odd Sture. (2021) A numerical study of a size-dependent finite-element based unit cell with primary and secondary voids. Journal of the Mechanics and Physics of Solids. volum 157.
    Academic article
  • Granum, Henrik; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2021) Calibration of the modified Mohr-Coulomb fracture model by use of localization analyses for three tempers of an AA6016 aluminium alloy. International Journal of Mechanical Sciences. volum 192.
    Academic article
  • Holmström, Petter Henrik; Clausen, Arild Holm; Berstad, Torodd; Morin, David; Hopperstad, Odd Sture. (2021) A pragmatic orthotropic elasticity-based damage model with spatially distributed properties applied to short glass-fibre reinforced polymers. International Journal of Solids and Structures. volum 230-231.
    Academic article
  • Reil, Matthias; Morin, David; Langseth, Magnus; Knoll, Octavian. (2021) A novel tests set-up for validation of connector models subjected to static and impact loadings. International Journal of Impact Engineering. volum 158.
    Academic article
  • Bergo, Sondre; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) Micromechanics-based identification of a ductile fracture model for three structural steels. Engineering Fracture Mechanics. volum 224 (106803).
    Academic article
  • Costas, Miguel; Morin, David; de Lucio, Mario; Langseth, Magnus. (2020) Testing and simulation of additively manufactured AlSi10Mg components under quasi-static loading. European Journal of Mechanics. A, Solids. volum 81.
    Academic article
  • Dæhli, Lars Edvard Blystad; Morin, David; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2020) A Numerical Study on Ductile Failure of Porous Ductile Solids With Rate-Dependent Matrix Behavior. Journal of applied mechanics. volum 87 (3).
    Academic article
  • Erice, Borja; Perez-Martin, Maria Jesus; Kristoffersen, Martin; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) Fracture mechanisms in largely strained solids due to surface instabilities. International Journal of Solids and Structures. volum 199.
    Academic article
  • Frodal, Bjørn Håkon; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2020) On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys. International Journal of Solids and Structures. volum 188-189.
    Academic article
  • Berntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2019) Experimental investigation and numerical modelling of the mechanical response of a semi-structural polyurethane adhesive. International Journal of Adhesion and Adhesives. volum 95.
    Academic article
  • Costas, Miguel; Morin, David; Hopperstad, Odd Sture; Børvik, Tore; Langseth, Magnus. (2019) A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations. Journal of the Mechanics and Physics of Solids. volum 123.
    Academic article
  • Khadyko, Mikhail; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Tensile ductility of extruded aluminium alloy AA6063 in different tempers. Materials Science & Engineering: A. volum 744.
    Academic article
  • Morin, David; Dæhli, Lars Edvard; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2019) Numerical study of ductile failure under non-proportional loading. European Journal of Mechanics. A, Solids. volum 74.
    Academic article
  • Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2018) A Lode-dependent Gurson model motivated by unit cell analyses. Engineering Fracture Mechanics. volum 190.
    Academic article
  • Morin, David; Fourmeau, Marion; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2018) Anisotropic tensile failure of metals by the strain localization theory: An application to a high-strength aluminium alloy. European Journal of Mechanics. A, Solids. volum 69.
    Academic article
  • Morin, David; Hopperstad, Odd Sture; Benallal, Ahmed. (2018) On the description of ductile fracture in metals by the strain localization theory. International Journal of Fracture. volum 209 (1-2).
    Academic article
  • Reil, Matthias; Morin, David; Langseth, Magnus; Knoll, Octavian. (2018) Connections between steel and aluminium using adhesive bonding combined with self-piercing riveting. The European Physical Journal Conferences. volum 183.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2018) Static and dynamic testing and modelling of aluminium joints with flow-drill screw connections. International Journal of Impact Engineering. volum 115.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2018) Testing and modelling of flow-drill screw connections under quasi-static loadings. Journal of Materials Processing Technology. volum 255.
    Academic article
  • Costas, Miguel; Morin, David; Langseth, Magnus; Díaz, Jacobo M.; Romera, Luis Esteban. (2017) Static crushing of aluminium tubes filled with PET foam and a GFRP skeleton. Numerical modelling and multiobjective optimization. International Journal of Mechanical Sciences. volum 131-132.
    Academic article
  • Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2017) Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials. Journal of the Mechanics and Physics of Solids. volum 107.
    Academic article
  • Gruben, Gaute; Morin, David; Langseth, Magnus; Hopperstad, Odd Sture. (2017) Ductile Fracture of Steel Sheets under Dynamic Membrane Loading. Procedia Engineering. volum 197.
    Academic article
  • Gruben, Gaute; Morin, David; Langseth, Magnus; Hopperstad, Odd Sture. (2017) Strain localization and ductile fracture in advanced high-strength steel sheets. European Journal of Mechanics. A, Solids. volum 61.
    Academic article
  • Gruben, Gaute; Sølvernes, Sindre Hellem; Berstad, Torodd; Morin, David; Hopperstad, Odd Sture; Langseth, Magnus. (2017) Low-velocity impact behaviour and failure of stiffened steel plates. Marine Structures. volum 54.
    Academic article
  • Morin, David; Kårstad, Bente Larsen; Skajaa, Birgitte; Hopperstad, Odd Sture; Langseth, Magnus. (2017) Testing and modelling of stiffened aluminium panels subjected to quasi-static and low-velocity impact loading. International Journal of Impact Engineering. volum 110.
    Academic article
  • Costas, Miguel; Morin, David; Langseth, Magnus; Romera, Luis Esteban; Díaz, Jacobo M.. (2016) Axial crushing of aluminum extrusions filled with PET foam and GFRP. An experimental investigation. Thin-walled structures. volum 99.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David Didier; Langseth, Magnus. (2016) Macroscopic modelling of Flow-Drill Screw connections. Key Engineering Materials. volum 710.
    Academic article
  • Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2016) Macroscopic modelling of flow-drill screw connections in thin-walled aluminium structures. Thin-walled structures. volum 105.
    Academic article
  • Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik; Morin, David; Langseth, Magnus. (2015) Macroscopic strength and failure properties of flow-drill screw connections. Journal of Materials Processing Technology. volum 222.
    Academic article
  • Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik; Morin, David; Langseth, Magnus. (2014) Behaviour of Flow-Drilling Screw Connections. Materials Science Forum. volum 794-796.
    Academic article
  • Morin, David; Bourel, B; Bennani, B; Lauro, F; Lesueur, D. (2013) A new cohesive element for structural bonding modelling under dynamic loading. International Journal of Impact Engineering. volum 53.
    Academic article

Journal publications

  • Costas, Miguel; Morin, David; Hopperstad, Odd Sture; Børvik, Tore; Langseth, Magnus. (2020) Corrigendum to “A through-thickness damage regularisation scheme for shell elements subjected to severe bending and membrane deformations” [Journal of the Mechanics and Physics of Solids 123 (2019) 190–206]. Journal of the Mechanics and Physics of Solids. volum 135.
    Errata

Part of book/report

  • Granum, Henrik; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Simulation of blast-loaded aluminium plates with crack-like defects. MekIT’19 - 10th National Conference on Computational Mechanics (Trondheim, Norway, 3-4 June 2019).
    Academic chapter/article

Teaching

Courses

  • TKT4140 - Numerical Methods
  • KT8306 - Plasticity Theory

Media

2022

  • Academic lecture
    Dæhli, Lars Edvard Blystad; Tekoglu, Cihan; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2022) Ductile failure predictions based on micromechanical models. 11th European Solid Mechanics Conference ; 2022-07-04 - 2022-07-08.
  • Academic lecture
    Lomazzi, Luca; Manes, Andrea; Cadini, Francesco; Morin, David; Aune, Vegard. (2022) Data-driven approach to account for fluid-structure interaction effects on blast loaded steel plates. 3rd International Conference on Impact Loading of Structures and Materials - ICILSM 2022 ; 2022-06-13 - 2022-06-17.
  • Academic lecture
    Morin, David; Costas, Miguel; Langseth, Magnus. (2022) Modelling of fracture in aluminium extrusions in large scale analyses. Nordic LS-DYNA users' conference 2022 ; 2022-10-18 - 2022-10-19.
  • Academic lecture
    Schwenke, Einar; Morin, David; Clausen, Arild Holm. (2022) Polymer testing with a pre-tensioned steel split-Hopkinson bar. 3rd International Conference on Impact Loading of Structures and Materials - ICILSM 2022 . NTNU; Trondheim. 2022-06-13 - 2022-06-17.
  • Academic lecture
    Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2022) Modelling of flow-drill screw connections in large-scale crash analyses. Nordic LS-Dyna User's Conference 2022 . DYNAmore Nordic; Gøteborg. 2022-10-18 - 2022-10-18.

2021

  • Academic lecture
    Andre, Victor; Morin, David; Costas, Miguel; Langseth, Magnus. (2021) Neural network representation of mechanical fasteners in large-scale analyses. 13th European LS-DYNA Conference 2021 ; 2021-10-05 - 2021-10-06.
  • Academic lecture
    Granum, Henrik Møgster; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2021) A study on blast-loaded aluminium plates with crack-like defects subjected to blast loading. 13th European LS-DYNA Conference 2021 . DYNAmore; Ulm. 2021-10-05 - 2021-10-07.
  • Academic lecture
    Holmen, Jens Kristian; Johnsen, Joakim; Morin, David; Børvik, Tore; Langseth, Magnus. (2021) Calibration of *MAT_258 with a Lode dependent fracture surface and its application in bending of high-strength steel. 13th European LS-DYNA Conference 2021 . DYNAmore; Ulm. 2021-10-05 - 2021-10-07.

2020

  • Academic lecture
    Holmen, Jens Kristian; Johnsen, Joakim; Morin, David; Børvik, Tore; Langseth, Magnus. (2020) Application of *MAT_258 for bending and crushing of extruded aluminum profiles using shell elements. 16th International LS-DYNA ® Users Conference . Ansys LST; Online. 2020-06-10 - 2020-06-11.
  • Academic lecture
    Johnsen, Joakim; Holmen, Jens Kristian; Gruben, Gaute; Morin, David; Langseth, Magnus. (2020) Calibration and Application of GISSMO and *MAT_258 for Simulations Using Large Shell Elements. 16th International LS-DYNA ® Users Conference . Ansys LST; Online. 2020-06-10 - 2020-06-11.

2019

  • Academic lecture
    Bergo, Sondre; Hopperstad, Odd Sture; Morin, David; Børvik, Tore. (2019) Micromechanics-based identification of a fracture model for three structural steels. COMPLAS . COMPLAS 2019; Barcelona. 2019-09-02 - 2019-09-06.
  • Academic lecture
    Berntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2019) Modelling of bonded component tests - Comparing MAT_240 to state-of-the-art model. 12th European LS-DYNA conference . DYNAmore GmbH; Koblenz. 2019-05-14 - 2019-05-16.
  • Poster
    Costas, Miguel; Kristoffersen, Martin; Morin, David; Børvik, Tore; Langseth, Magnus. (2019) Testing and simulation of SLM AlSi10Mg under large deformations. Workshop of the Aluminium Innovation Hub: Digitalisation for smart processes and product design . NTNU; Trondheim. 2019-06-12 - 2019-06-13.
  • Lecture
    Costas, Miguel; Morin, David; Langseth, Magnus. (2019) An experimental and numerical study on the lateral crushing of additively manufactured AlSi10Mg boxes. ESIAM19, First European Conference on Structural Integrity of Additively Manufactured Materials ; Trondheim. 2019-09-09 - 2019-09-11.
  • Lecture
    Costas, Miguel; Morin, David; Langseth, Magnus. (2019) Modelling and Simulation of Impact in Stiffened Aluminium Panels Using Damage Regularisation. ASIDIC2019, Aerospace Structural Impact Dynamics International Conference ; Madrid. 2019-06-04 - 2019-06-06.
  • Lecture
    Costas, Miguel; Morin, David; Langseth, Magnus. (2019) Multi-Scale Numerical Simulations of Structural Joints with Flow-Drill Screws using a Virtual Material Calibration. 12th European LS-DYNA Conference 2019 ; Koblenz. 2019-05-14 - 2019-05-16.
  • Academic lecture
    Dæhli, Lars Edvard Blystad; Morin, David; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2019) Effects of Lode-dependent matrix behaviour on the macroscopic yielding and ductile failure in isotropic porous plastic solids. CFRAC2019 ; 2019-06-12 - 2019-06-14.
  • Poster
    Dæhli, Lars Edvard Blystad; Morin, David; Børvik, Tore; Benallal, Ahmed; Hopperstad, Odd Sture. (2019) Influence of matrix yield surface curvature on the effective yielding and ductile failure of isotropic porous plastic materials. Workshop of the Aluminium Innovation Hub: Digitalisation for smart processes and product design ; Trondheim. 2019-06-12 - 2019-06-13.
  • Lecture
    Erice, Borja; Perez-Martin, Maria Jesus; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Plastic Instability Mechanisms due to Surface Imperfections in Largely Strained Metallic Materials. XV International Conference on Computational Plasticity. COMPLAS 2019 ; Barcelona. 2019-09-03 - 2019-09-05.
  • Academic lecture
    Espeseth, Vetle; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) The effects from size and volume fraction of intermetallic particles on ductile failure: a numerical study. COMPLAS 2019 ; Barcelona. 2019-09-03 - 2019-09-05.
  • Poster
    Fernandez, Marcos; Morin, David; Hopperstad, Odd Sture. (2019) Modelling of aluminium components under large deformations. Workshop of the Aluminium Innovation Hub: Digitalisation for smart processes and product design . NTNU; Trondheim. 2019-06-12 - 2019-06-13.
  • Poster
    Frodal, Bjørn Håkon; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) On the effect of plastic anisotropy, strength and work hardening on the tensile ductility of aluminium alloys. Aluminium Innovation Workshop . European Aluminium; Trondheim. 2019-06-12 - 2019-06-13.
  • Academic lecture
    Granum, Henrik; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2019) Simulation of blast-loaded aluminium plates with geometrical defects. MekIT 19 National Conference on Computational Mechanics ; Trondheim. 2019-06-03 - 2019-06-04.
  • Academic lecture
    Johnsen, Joakim; Holmen, Jens Kristian; Gruben, Gaute; Morin, David; Langseth, Magnus. (2019) Calibration and application of GISSMO and *MAT_258 for shell element simulations of high-strength steel. 12th European LS-DYNA conference . DYNAMORE Germany; Koblenz. 2019-05-14 - 2019-05-16.
  • Academic lecture
    Kristoffersen, Martin; Morin, David; Hopperstad, Odd Sture; Børvik, Tore. (2019) Localisation analysis in an X65 offshore pipeline steel. 38th International Conference on Ocean, Offshore & Arctic Engineering . The American Society of Mechanical Engineers; Glasgow. 2019-06-09 - 2019-06-14.
  • Academic lecture
    Kristoffersen, Martin; Morin, David; Hopperstad, Odd Sture; Børvik, Tore. (2019) Numerical analyses of localisation in steel subjected to non-proportional loading. Computational Plasticity 2019 (COMPLAS XV) . CIMNE; Barcelona. 2019-09-03 - 2019-09-05.
  • Lecture
    Morin, David; Berstad, Torodd; Costas, Miguel; Hopperstad, Odd Sture; Langseth, Magnus. (2019) *MAT_258: A Through-Thickness Regularization Scheme for Shell Element Analyses – Application to Aluminium Components. 12th European LS-DYNA Conference 2019 ; Koblenz. 2019-05-14 - 2019-05-16.
  • Academic lecture
    Morin, David; Hopperstad, Odd Sture; Børvik, Tore. (2019) Numerical analyses of localisation in steel subjected to non-proportional loading. Computational Plasticity 2019 (COMPLAS XV) . CIMNE; Barcelona. 2019-09-03 - 2019-09-05.
  • Lecture
    Morin, David; Reil, Matthias; Berstad, Torodd; Costas, Miguel; Langseth, Magnus. (2019) Modelling of Steel-Aluminium Components using Structural Adhesive and Self-Piercing Rivets. 12th European LS-DYNA Conference 2019 ; Koblenz. 2019-05-14 - 2019-05-16.
  • Lecture
    Schwenke, Einar; Morin, David; Clausen, Arild Holm. (2019) Modelling of polypropylene subjected to impact loading at low temperatures. 12th European LS-DYNA conference . DYNA MORE; Koblenz. 2019-05-14 - 2019-05-16.

2018

  • Poster
    Berntsen, John Fredrick; Morin, David; Clausen, Arild Holm; Langseth, Magnus. (2018) Mechanical behaviour of a ductile polyurethane adhesive. DYFP2018, the 17th International Conference on Deformation, Yield and Fracture of Polymers ; 2018-03-26 - 2018-03-29.
  • Academic lecture
    Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2018) A modified Gurson model accounting for Lode-dependent void growth. 16th European Mechanics of Materials Conference ; Nantes. 2018-03-26 - 2018-03-28.
  • Academic lecture
    Hopperstad, Odd Sture; Morin, David; Dæhli, Lars Edvard; Børvik, Tore. (2018) MICROSTRUCTURE-BASED MODELLING AND SIMULATION OF ALUMINIUM STRUCTURES. 31st Nordic Seminar on Computational Mechanics . Umeå universitet; Umeå. 2018-10-25 - 2018-10-26.
  • Academic lecture
    Hopperstad, Odd Sture; Morin, David; Dæhli, Lars Edvard; Børvik, Tore; Benallal, Ahmed. (2018) Modelling of strain localization in ductile materials. ESMC18 - 10th European Solid Mechanics Conference . University of Bologna/University of Trento; Bologna. 2018-07-02 - 2018-07-06.
  • Academic lecture
    Hopperstad, Odd Sture; Morin, David; Dæhli, Lars Edvard; Børvik, Tore; Benallal, Ahmed. (2018) Strain localization as an indicator for ductile fracture in metals. EMMC16 – 16th European Mechanics of Materials Conference . École Centrale de Nantes; Nantes. 2018-03-26 - 2018-03-28.
  • Academic lecture
    Morin, David. (2018) Failure by strain localization. Topics in ductile fracture of metals . FractAl; Hotel Scandic Nidelven, Trondheim. 2018-10-17 - 2018-10-18.
  • Academic lecture
    Morin, David; Hopperstad, Odd Sture; Benallal, Ahmed. (2018) On the connections between imperfection and bifurcation analyses in simulation of ductile failure. ESMC 2018 - 10th European Solid Mechanics Conference . University of Bologna/University of Trento; Bologna. 2018-07-02 - 2018-07-06.

2017

  • Academic lecture
    Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2017) Strain localization analyses of generic FCC textures using imperfection band analyses. 14th International Conference on Fracture ; Rhodos. 2017-06-19 - 2017-06-23.
  • Academic lecture
    Hopperstad, Odd Sture; Morin, David; Benallal, Ahmed. (2017) Modelling and simulation of ductile fracture in metals using strain localization theory. Dymat 23rd Technical Meeting . SIMLab, NTNU; Trondheim. 2017-09-12 - 2017-09-14.
  • Academic lecture
    Hopperstad, Odd Sture; Morin, David; Benallal, Ahmed. (2017) Simulation of anisotropic tensile failure in high-strength aluminium alloy by localization theory. COMPLAS 2017. XIV Conference on Computational Plasticity. Fundamentals and applications. . CIMNE / Universitat Politècnica de Catalunya, Spain; Barcelona. 2017-09-05 - 2017-09-07.
  • Academic lecture
    Morin, David; Hopperstad, Odd Sture; Benallal, Ahmed. (2017) Qualitative aspects of ductile failure by strain localization. COMPLAS 2017. XIV Conference on Computational Plasticity. Fundamentals and applications. . CIMNE / Universitat Politècnica de Catalunya, Spain; Barcelona. 2017-09-05 - 2017-09-07.

2016

  • Academic lecture
    Dæhli, Lars Edvard; Morin, David; Børvik, Tore; Hopperstad, Odd Sture. (2016) Influence of a high-exponent isotropic yield criterion on the macroscopic yielding and plastic instability of porous ductile solids. EMMC15 ; Brüssel. 2016-09-07 - 2016-09-09.
  • Academic lecture
    Sønstabø, Johan Kolstø; Morin, David; Langseth, Magnus. (2016) A Cohesive Element Model for Large-Scale Crash Analyses in LS-DYNA. 14th International LS-DYNA Conference ; Detroit. 2016-06-12 - 2016-06-14.

2015

  • Poster
    Holmstrøm, Petter Henrik; Clausen, Arild Holm; Morin, David; Hopperstad, Odd Sture. (2015) An experimental and numerical investigation of tensile properties of glass fibre-reinforced polypropylene. 16th International Conference on Deformation, Yield and Fracture of Polymers ; 2015-03-29 - 2015-04-02.

2014

  • Academic lecture
    Hoang, Nguyen-Hieu; Langseth, Magnus; Morin, David. (2014) Behaviour of aluminium self-piercing rivets in alloy AA7278-T6. ICILLS2014 ; Cape Town. 2014-01-12 - 2014-01-16.

2013

  • Academic lecture
    Morin, David; Hopperstad, Odd Sture; Lademo, Odd-Geir; Langseth, Magnus. (2013) Modelling of Aluminium Components for crash loadings. 9th European LS-DYNA Conference 2013 . Dyna More; Manchester, UK. 2013-06-03 - 2013-06-04.
NTNU
Studies
  • Master's programmes in English
  • For exchange students
  • PhD opportunities
  • Courses
  • Career development
  • Continuing education
  • Application process
Contact
  • Contact NTNU
  • Employees
  • For alumni
  • Press contacts
  • Researcher support
Discover NTNU
  • Experts
  • Vacancies
  • Pictures from NTNU
  • Innovation resources
  • NTNU in Gjøvik
  • NTNU in Trondheim
  • NTNU in Ålesund
  • Maps
About NTNU
  • NTNU's strategy
  • Research excellence
  • Strategic research areas
  • Organizational chart
  • Libraries
  • About the university
Services
  • For employees
  • For students
  • Blackboard
  • Intranet

Norwegian University of Science and Technology

About cookies
Privacy policy
Editoral responsibility
Sign In