Background and activities

Areas of research include (but not limited to) Additive manufacturing including powder bed fusion processes (laser (SLM)/electron beam (EBM)),  selective laser sintering (SLS), powder metallurgy, meta-stable materials (including amorphous materials), light metals, materials joining and structure-property correlation in metals. 

Accolades

(6) Outstanding contribution in Reviewing - Materials Science and Engineering B - Elsevier (July 2017) 

(5) IAAM Scientist Medal 2017 (International Association of Advanced Materials Scientist Medal 2017) (11th March 2017 at the Diamond Princess Cruise, Singapore)

(4) Outstanding contribution in Reviewing - Journal of Materials Processing Technology - Elsevier (November 2016)

(3) Outstanding contribution in Reviewing - Journal of Alloys and Compounds - Elsevier (July 2015)

(2) Outstanding contribution in Reviewing - Materials & Design - Elsevier (May 2015)

(1) Outstanding contribution in Reviewing - Materials & Design - Elsevier (February 2015)

Publications post-NTNU

2018

80. R. Kumar, A. K. Chaubey, S. Bathula, K. G. Prashanth, A. Dhar, Al2O3-TiC composite prepared by spark plasma sintering process: Evaluation of mechanical and tribological properties, Journal of Materials Engineering and Performance, (Accepted Manuscript - In Press) (Impact factor - 1.09)

79. P. Wang, C. Gammer, F. Brenne, K. G. Prashanth, R. G. Mendes, M. H. Rummeli, T. Gemming, J. Eckert, S. Scudino, Microstructure and mechanical properties of a heat-treatable Al-3.5Cu-1.5Mg-1Si alloy produced by selective laser melting, Materials Science and Engineering A, 711 (2018) 562-570 (Impact factor - 3.09)

78. P. Wang, L. Deng, K. G. Prashanth, S. Pauly, J. Eckert, S. Scudino, Microstructure and mechanical properties of Al-Cu alloys fabricated by selective laser melting of powder mixtures, Journal of Alloys and Compounds, (Accepted Manuscript - In Press) (Impact factor - 3.13)

2017

77. X. Q. Liu, C. J. Li, J. Eckert, K. G. Prashanth, O. Renk, L. Teng, Y. C. Liu, R. Bao, J. M .Tao, T. Shen, J. H. Li, Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites, Materials Characterization, 133 (2017) 122-132 (Impact Factor - 2.714)

76. P. Ma, J. D. Jia, K. G. Prashanth, Z. S. Yu, S. L. Yang, J. Zhao, C. G. Li, Effect of Al2O3 nanoparticles as reinforcement on the tensile behavior of Al-12Si composites, Metals 7 (2017) 359 (Impact Factor - 1.984)

75. K. G. Prashanth, R. Damodaram, T. Maity, P. Wang, J. Eckert, Friction welding of selective laser melted Ti6Al4V parts, Materials Science and Engineering A, 704 (2017) 66-71 (Impact Factor - 3.09)

74. J. Suryawanshi, K. G. Prashanth, U. Ramamurty, Tensile, fracture and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting, Journal of Alloys and Compounds, 725 (2017) 355-364 (Impact factor - 3.13)

73. K. G. Prashanth, S. Kolla, J. Eckert, Additive manufacturing processes: selective laser melting, electron beam melting and binder jetting - selection guidelines, Materials, 10 (2017) 672 (Impact factor - 2.65).

72. Z. Wang, K. Georgarakis, W.W. Zhang, K.G. Prashanth, J. Eckert, S. Scudino, Reciprocating sliding wear behavior of high-strength nanocrystalline Al84Ni7Gd6Co3 alloys, Wear, 382-383 (2017) 78-84 (Impact Factor - 2.32).

71. J. Suryawanshi, K. G. Prashanth, U. Ramamurty, Mechanical behavior of selective laser melted 316L stainless steel, Materials Science and Engineering A, 696 (2017) 113-121 (Impact Factor – 3.09).

70. P. Ma, Y. D. Jia, K. G. Prashanth, Z. S. Yu, C. G. Li, J. Zhao, S. L. Yang, L. X. Huang, Effect of Si content on the microstructure and properties of Al-Si alloys fabricated using hot extrusion, Journal of Materials Research, (Accepted Manuscript) (Impact Factor - 1.58).

69. M. Alizadeh, A. H. Taghvaei, S. Khoramkhorshid, K. G. PrashanthCharacterization of Al/crystallized Al-based metallic glass composites produced by repeated roll bonding process, Metals and Materials International, 23 (2017) 823-830 (Impact Factor – 1.82).

Publications pre-NTNU

68. L. Zhang, Z. Y. He, J. Tan, M. Calin, K. G. Prashanth, B. Sarac, B. Volker, Y. H. Jiang, R. Zhou, J. Eckert, Designing a multifunctional Ti-2Cu-4Ca porous biomaterial with favorable mechanical properties and high bioactivity, 727 (2017) 338-345 (Impact Factor - 3.01).

67. O. Balci, K. G. Prashanth, S. Scudino, M. Somer, J. Eckert,  Powder metallurgy of Al-based composites reinforced with Fe-based glassy particles: Effect of microstructural modification, KONA Powder and Particles Journal, Particulate Science and Technology, Accepted Manuscript (In Press).

66. P. Ma, Z. J. Wi, Y. D. Jia, Z. S. Yu, K. G. Prashanth, S. L. Yang, C. G. Li, L. X. Huang, J. Eckert, Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiCp/Al-20Si composites solidified under high pressure, Journal of Alloys and Compounds, 709 (2017) 329-336 (Impact Factor - 3.01).

65. K. G. Prashanth, S. Scudino, T. Maity, J. Das, J. Eckert, Is the energy density a reliable parameter for materials synthesis by selective laser melting?, Materials Research Letters, 2017 (Accepted Manuscript – In Press) (Impact Factor – 5.89 - expected).

64. K. G. Prashanth, S. Scudino, R. P. Chatterjee, O. O. Salman, J. Eckert, Additive manufacturing: Reproducibility of metallic parts, Technologies, 5 (2017) 8 (Impact Factor – NA).

63. L. Zhang, Z. Y. He, J. Tan, Y. Q. Zhang, M. Stoica, M. Calin, K. G. Prashanth, M. J. Cordill, Y. H. Jiang, R. Zhou, J. Eckert, Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity, Intermetallics, 84 (2017) 35-41 (Impact Factor – 2.54).

62. Y. D. Jia, P. Ma, K. G. Prashanth, G. Wang, J. Yi, S. Scudino, F. Y. Cao, J. F. Sun, J. Eckert, Microstructure and thermal expansion behaviour of Al-50Si synthesized by selective laser melting, Journal of Alloys and Compounds, 699 (2017) 548-553 (Impact Factor – 3.01).

61. K. G. Prashanth, S. Scudino, J. Eckert, Defining the tensile properties of Al-12Si parts produced by selective laser melting, Acta Materialia, 126 (2017) 25-35 (Impact Factor – 5.06).

60. K. G. Prashanth, J. Eckert, Formation of metastable cellular microstructures in selective laser melted alloys, Journal of Alloys and Compounds, 707 (2017) 27-34 (Impact Factor – 3.01).

59. L. Zhang, Z. Y. He, J. Tan, Y. Q. Zhang, M. Stoica, K. G. Prashanth, M. J. Cordill, Y. H. Jiang, R. Zhou, J. Eckert, Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity, Intermetallics, 82 (2017) 1-13 (Impact Factor – 2.54).

58. K. G. Prashanth, S. Scudino, J. Eckert, Tensile properties of Selective Laser Melted (SLM) Al-12Si at different temperatures, Technologies, 4 (2016) 38 (Impact Factor – NA).

57. Z. Wang, S. Scudino, K. G. Prashanth, J. Eckert, Corrosion properties of high-strength nanocrystalline Al84Ni7Gd6Co3 alloy produced by hot pressing of metallic glass, Journal of Alloys and Compounds, 707 (2017) 63-67.

56. P. Wang, H. C. Li, K. G. Prashanth, J. Eckert, S. Scudino, Selective laser meltingof Al-Zn-Mg-Cu: heat treatment, microstructure and mechanical properties, Journal of Alloys and Compounds, 707 (2017) 287-290 (Impact Factor – 3.01).

55. A. K. Chaubey, K. G. Prashanth, Z. Wang, S. Scudino, N. K. Mukhopadhyay, J. Eckert, Effect of particle size on microstructure and mechanical properties of Al based composite reinforced with 10 vol.% mechanically alloyed Mg-7.4Al particles, Technologies, 4 (2016) 37 (Impact Factor – NA).

54. K. G. Prashanth, L. Löber, H-J. Klauss, U. Kühn, J. Eckert, Characterization of 316L steel cellular dodecahedron structures produced by selective laser melting, Technologies, 4 (2016) 34 (Impact Factor – NA).

53. K. G. Prashanth, K. Zhuravleva, I. Okulov, M. Calin, J. Eckert, A. Gebert, Mechanical and corrosion behaviour of new generation Ti-45Nb porous alloys implant devices, Technologies, 4 (2016) 33 (Impact Factor – NA).

52. S. Ehtemam-Haghighi, K. G. Prashanth, H. Attar, A. K. Chaubey, G. C. Cao, L.-C. Zhang, Mechanical and wear properties of designed Ti-Fe-xNb alloys for biomedical applications, Materials and Design, 111 (2016) 592-599 (Impact Factor – 3.50). 

51. Z. Wang, R. T. Qu, K. G. Prashanth, J. Eckert, S. Scudino, Compression behavior of inter-particle regions in high-strength Al84Gd7Ni6Co3 alloy, Materials Letters, 185 (2016) 25-28 (Impact Factor – 2.44). 

50. P. Ma, Z. J. Wei, J. D. Jia, C. M. Zou, S. Scudino, K. G. Prashanth, Z. S. Yu, S. L. Yand, C. G. Li, J. Eckert, Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si, Journal of Alloys and Compounds, 688 (2016) 88-93 (Impact Factor – 3.01). 

49. J. Suryawanshi, K. G. Prashanth, S. Scudino, J. Eckert, Om Prakash, U. Ramamrty, Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting, Acta Materialia, 115 (2016) 285-294 (Impact Factor – 5.06). 

48. R. Parthiban, A. H. Taghvaei, K. G. Prashanth, Ravi Kumar, J. Eckert, M. Stoica, Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses, Journal of Applied Physics, 119 (2016) 073908 (Impact Factor – 2.77). 

47. P. Ma, Y. D. Jia, K. G. Prashanth, S. Scudino, Z. S. Yu, J. Eckert, Microstructure and phase formation in Al-20Si-5Fe-3cu-1Mg synthesized by selective laser melting, Journal of Alloys and Compounds, 657 (2016) 430-435 (Impact Factor – 3.01). 

46. K. G. Prashanth, S. Scudino, A. K. Chaubey, L. Löber, P. Wang, H. Attar, F. P. Schimansky, F. Pyczak, J. Eckert, Processing of Al-12Si – TNM composites by selective laser melting and evaluation of compressive and wear properties, Journal of Materials Research, 31 (2016) 55-65 (Impact Factor – 1.58).

45. Z. Wang, R. T. Qu, S. Scudino, B. A. Sun, K. G. Prashanth, D. V. Louzguine-Luzgin, M. W. Chen, Z. F. Zhang, J. Eckert, Hybrid nanostructured aluminum alloy with super-high strength, NPG Asia Material, 7 (2015) e229 (Impact Factor – 9.16). 

44. H. Y. Jung, S. J. Choi, K. G. Prashanth, M. Stoica, S. Scudino, S. Yi, U. Kuhn, D. H. Kim, K. B. Kim, J. Eckert, Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study, Materials and Design 86 (2015) 703-708 (Impact Factor – 3.50).

43. A. H. Taghvaei, F. Ghajari, D. Marko, K. G. Prashanth, Influence of milling time on microstructure and magnetic properties of Fe80P11C9 alloy produced by mechanical alloying, Journal of Magnetism and Magnetic Materials 395 (2015) 354-360 (Impact Factor – 2.36). 

42. H. Attar, K. G. Prashanth, L. C. Zang, M. Calin, I. V. Okulov, S. Scudino, C. Yang, J. Eckert, Effect of powder particle shape on the properties of insitu Ti-TiB composite materials produced by selective laser melting, Journal of Materials Science and Technology, 31 (2015) 1001-1005 (Impact Factor – 2.27).

41. S. Scudino, C. Unterdoerfer, K. G. Prashanth, H. Attar, N. Ellendt, V. Uhlenwinkel, J. Eckert, Additive Manufacturing of Cu-10Sn bronze, Materials Letters, 156 (2015) 202-204 (Impact Factor – 2.44).

40. Ö. Balcı, K. G. Prashanth, S. Scudino, D. Ağaoğulları , İ. Duman, M. L. Öveçoğlu, V. Uhlenwinkel, J. Eckert, Effect of milling time and the consolidation process on the mechanical properties of Al matrix composites reinforced with Fe-based glassy particles, Metals, 5 (2015) 669-685 (Impact Factor – 1.57).

39. H. Schwab, K. G. Prashanth, L. Löber, U. Kuehn, J. Eckert, Selective laser melting of Ti-45Nb alloy, Metals, 5 (2015) 686-694 (Impact Factor – 1.57).

38. A. K. Chaubey, K. G. Prashanth, N. Ray, Z. Wang, Study on in-situ synthesis of Al-TiC composite by self-propagating high temperature synthesis process, Materials Science an Indian Journal, 12 (2015) 454-461 (Impact Factor – NA).

37. S. Scudino, M. Stoica, I. Kaban, K. G. Prashanth, G. B. M. Vaughan, J. Eckert, Length scale-dependent structural relaxation in Zr57.5Ti7.5Nb5Cu12.5Ni10Al7.5 metallic glass, Journal of Alloys and Compounds, 639 (2015) 465-469 (Impact Factor – 3.01).

36. F.Y. Cao, Y.D. Jia, K. G. Prashanth, P. Ma, J.S. Liu, S. Scudino, F. Huang, J. Eckert, J.F. Sun, Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy, Materials and Design, 74 (2015) 150-156 (Impact Factor – 3.50).

35. K. G. Prashanth, H. Shakur Shahabi, H. Attar, V. C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, S. Scudino, Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting, Additive Manufacturing, 6 (2015) 1-5 (Impact Factor – NA).

34. Z. Wang, K. G. Prashanth, A. K. Chaubey, L. Loeber, F. P. Schimansky, F. Pyczak, W. W. Zhang, S. Scudino, J. Eckert, Tensile properties of Al-12Si matrix composites reinforced with Ti-Al-based particles, Journal of Alloys and Compound, 630 (2015) 256-259 (Impact Factor – 3.01). 

33. H. Attar, L. Loeber, A. Funk, M. Calin, L. C. Zhang, K. G. Prashanth, S. Scudino, J. Eckert, Mechanical behavior of porous commercially pure Ti and Ti-TiB composite materials manufactured by selective laser melting, Materials Science and Engineering A, 625 (2015) 350-356 (Impact Factor – 2.65). 

32. H. Attar, K. G. Prashanth, A. K. Chaubey, M. Calin, L. C. Zhang, S. Scudino, J. Eckert, Comparison of wear properties of commercially pure Titanium prepared by selective laser melting and casting processes, Materials Letters, 142 (2015) 38-41 (Impact Factor – 2.44).

31. A. K. Chaubey, S. Scudino, K. G. Prashanth, J. Eckert, Microstructure and mechanical properties of Mg-Al alloy modified with Cerium, Materials Science and Engineering A, 625 (2015) 46-49 (Impact Factor – 2.65).

30. Z. J. Wei, P. Ma, H. W. Wang, C. M. Zou, S. Scudino, K. K. Song, K. G. Prashanth, W. Jiang, J. Eckert, The thermal expansion behaviour of SiCp/Al-20Si composites solidified under high pressures, Materials and Design, 65 (2015) 387-394 (Impact Factor – 3.99).

29. K. G. Prashanth, B. Debalina, Z. Wang, P. F. Gostin, A. Gebert, M. Calin, U. Kühn, M. Kamaraj, S. Scudino, J. Eckert, Tribological and corrosion properties of Al-12Si produced by selective laser melting, Journal of Materials Research, 29 (2014) 2044-2054 (Impact Factor – 1.58).

28. A. K. Chaubey, S. Scudino, M. Samadi Khoshkhoo, K. G. Prashanth, N. K. Mukhopadhyay, B. K. Mishra, J. Eckert, High-strength ultrafine grain Mg-7.4%Al alloy synthesized by consolidation of mechanically alloyed powders, Journal of Alloys and Compound, 610 (2014) 456-461 (Impact Factor – 3.01)

27. Z. Wang, J. Tan, B. A. Sun, S. Scudino, K. G. Prashanth, W. W. Zhang, Y. Y. Li, J. Eckert, Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles, Materials Science and Engineering A, 600 (2014) 53-58 (Impact Factor – 2.65).

26. P. Ma, K. G. Prashanth, S. Scudino, Y.D. Jia, H.W. Wang, C.M. Zou, Z.J. Wei, J. Eckert, Influence of annealing on mechanical properties of Al-20Si processed by selective laser melting, Metals, 4 (2014) 28-36 (Impact Factor – 1.57). 

25. K. G. Prashanth, R. Damodaram, S. Scudino, Z. Wang, K. Prasad Rao, J. Eckert, Friction welding of Al-12Si parts produced by selective laser melting, Materials and Design, 57 (2014) 632-637 (Impact Factor – 3.50). 

24. K. Zhuravleva, M. Bönisch, K. G. Prashanth, U. Hempel. A. Health, T. Gemming, M. Calin, S. Scudino, L. Schultz, J. Eckert, A. Gebert, Production of porous β-type Ti-40Nb alloy for biomedical applications: Comparison of selective laser melting and hot pressing, Materials, 6 (2014) 5700-5713 (Impact Factor – 2.73). 

23. Z. Wang, K. G. Prashanth, S. Scudino, J. He, W. W. Zhang, Y. Y. Li, M. Stoica, G. Vaughan, D. J. Sordelet, J. Eckert, Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders, Intermetallics, 46 (2014) 97-102 (Impact Factor – 2.54).

22. D. Marko, K. G. Prashanth, S. Scudino, Z. Wang, N. Ellendt, V. Uhlenwinkel, J. Eckert, Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading, Journal of Alloys and Compounds, 615 (2014) S382 - S385 (Impact Factor – 3.01). 

21. Z. Wang, J. Tan, S. Scudino, B. A. Sun, R. T. Qu, J. Hu, K. G. Prashanth, W. W. Zhang, Y. Y. Li, J. Eckert, Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glass, Advanced Powder Technology, 25 (2014) 635-639 (Impact Factor – 2.48). 

20. K. G. Prashanth, S. Scudino, H. J. Klauss, K. B. Surreddi, L. Loeber, Z. Wang, A. K. Chaubey, U. Kuehn, J. Eckert, Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment, Materials Science and Engineering: A, 590 (2014) 153-160 (Impact Factor – 2.65). 

19. A. H. Taghvaei, M. Stoica, K .G. Prashanth, J. Eckert, Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties, Acta Materialia, 61 (2013) 6609-6621 (Impact Factor – 5.06). 

18. A. H. Taghvaei, M. Stoica, F. Mazaleyrat, K. G. Prashanth, M. Samadi Khoshkhoo, K. Janghorban, J. Eckert, Microstructure and magnetic properties of soft magnetic composites based on silicon resin coated Co40Fe22Ta8B30 glassy powders, Intermetallics, 43 (2013) 1-7 (Impact Factor – 2.54). 

17. S. Scudino, J. Y. Kim, K. G. Prashanth, M. H. Lee, B. S. Kim, U. Kuehn, J. Eckert, Production glassy powders, of customized hybrid porous structures by powder metallurgy of Ni59Zr20Ti16Si2Sn3, Journal of Materials Research, 28 (2013) 2490-2498 (Impact Factor – 1.58). 

16. Z. Wang, K. G. Prashanth, S. Scudino, A. K. Chaubey, D. J. Sordelet, W. W. Zhang, Y. Y. Li, J. Eckert, Tensile properties of Al matrix composites reinforced with in-situ devitrified Al84Gd6Ni7Co3 glassy particles, Journal of Alloys and Compound, 586 (2014) S419-S422 (Impact Factor – 3.01).

15. A. K. Chaubey, S. Scudino, M. S. Khoshkhoo, K.G. Prashanth, N.K Mukhopadhyay, J. Eckert, Synthesis and characterization of nanocrystalline Mg93.3Al6.7 powders produced by mechanical alloying, Metals, 3 (2013) 58-68 (Impact Factor – 1.54). 

14. D. Beitelschmidt, S. Scudino, K. G. Prashanth, U. Kühn, J. Eckert, Mechanical behavior of the cold-rolled Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 metallic glass quasi crystalline composite, International Journal of Materials Research (formerly Zeitschrift für Metallkunde), 103 (2012) 1113-1116 (Impact Factor – 0.73). 

13. F. Ali, S. Scudino, G. Liu, V. C. Srivastava, N. K. Mukhopadhyay, M. S. Khoshkhoo, K. G. Prashanth, V. Uhlenwinkel, M. Calin, J. Eckert, Modeling the strengthening effect of Al-Cu-Fe quasicrystalline particles in Al based metal matrix composites, Journal of Alloys and Compound, 536 (2012) S130-S133 (Impact Factor – 3.01). 

12. K. G. Prashanth, K. B. Surreddi, S. Scudino, M. SamadiKhoshkhoo, Z. Wang, D. J . Sordelet, J. Eckert, Powder Metallurgy of high strength Al90.4Y4.4Ni4.3Co0.9 gas-atomized powder, in ICAA13: International Conference on Aluminum Alloys (eds H. Weiland, A. D. Rollett and W. A. Cassada), John Wiley & Sons, Inc., Hoboken, NJ, USA. Doi: 10.1002/9781118495292.ch152 (Impact Factor – NA).

11. A. K. Chaubey, S. Scudino, K. G. Prashanth, M. Stoica, G. Vaughan, N. K. Mukhopadhyay, B. K. Mishra, J. Eckert, Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing, Materials Letters, 79 (2012) 145-147 (Impact Factor – 2.44). 

10. K. G. Prashanth, S. Scudino, M. S. Khoshkhoo, K. B. Surreddi, M. Stoica, G. Vaughan, J. Eckert, Structural and mechanical characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 bulk metallic glass; Materials, 5 (2012) 1–11 (Impact Factor – 2.73).

9. K. G. Prashanth, S. Scudino, B. S. Murty, J. Eckert, Fabrication, mechanical and tribological properties of Al70Y16Ni10Co4 glass reinforced metal matrix composites, Materials and Manufacturing Processes, 26 (2011) 1242-1247 (Impact Factor – 1.42).

8. K. G. Prashanth, Comment on the paper ‘Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying’ by Xiu Wei, Xinfu Wang, Fusheng Han, Haowen Xie, Cui’e Wen, J. Alloys Compd. 496 (2010) 313-316, Journal of Alloys and Compound, 507 (2010) L32-L34 (Impact Factor – 3.01).

7. S. Scudino, F. Ali, K. B. Surreddi, K. G. Prashanth, M. Sakaliyska, J. Eckert, Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles, 15th International Conference on the strength of materials (ICSMA 15), Journal of Physics - Conference series, 240 (2010) 012154 (Impact Factor – 0.45).

6. K. G. Prashanth, Influence of mechanical activation on decomposition of titanium hydride, Materials and Manufacturing Processes, 25 (2010) 974-977 (Impact Factor – 1.42).

5. K. G. Prashanth, B. S. Murty, Production, kinetic study and properties of Fe-based glass and its composites, Materials and Manufacturing Processes, 25 (2010) 592-597 (Impact Factor – 1.42).

4. K. B. Surreddi, S. Scudino, M. Sakaliyska, K. G. Prashanth, D. J. Sordelet, J. Eckert, Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder, Journal of Alloys and Compound, 491 (2010) 137-142 (Impact Factor – 3.01).

3. K. G. Prashanth, S. Scudino, K. B. Surreddi, M. Sakalyiska, B. S. Murty, J. Eckert, Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots, Materials Science and Engineering A, 513 (2009) 279-285 (Impact Factor – 2.65).

2. K. G. Prashanth, S. Scudino, B. S. Murty, J. Eckert, Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders, Journal of Alloys and Compound, 477 (2009)171-177 (Impact Factor – 3.01).

1. S. Scudino, G. Liu, K. G. Prashanth, B. Bartusch, B. S. Murty, J. Eckert, Mechanical Properties of Al-based metal matrix composites reinforced with Zr-based glass particles produced by powder metallurgy, Acta Materialia, 57(2009) 2029-2039 (Impact Factor – 5.06).

                                                                                                   Updated 28.11.2017 at 17.59 h CET

Scientific, academic and artistic work

A selection of recent journal publications, artistic productions, books, including book and report excerpts. See all publications in the database

Journal publications