Zhuo Xu 'Loker'
About
Zhuo Xu (Loker) is a Ph.D. candidate at the Department of Mechanical and Industrial Engineering in the research group of Design, Analysis, and Manufacturing (DAM). His research activities are mainly supervised by Associate Professor Seyed Mohammad Javad Razavi.
His research topic is about Geometry dependent mechanical properties of Additively manufactured (AM) components under complex loading, focusing on the static and dynamic properties of components fabricated via AM such as lattice structures.
Publications
2024
-
Xu, Zhuo;
Tvenning, Terje;
Wu, Tao;
Razavi, Nima.
(2024)
Evaluating quasi-static and fatigue performance of IN718 gyroid lattice structures fabricated via LPBF: Exploring relative densities.
International Journal of Fatigue
Academic article
2023
-
Occhipinti, Roberta;
Caggiani, Maria Cristina;
de Ferri, Lavinia;
Xu, Zhuo;
Steindal, Calin Constantin;
Razavi, Nima.
(2023)
Structural properties of volcanic precursors-based geopolymers before and after natural weathering.
Ceramics International
Academic article
-
Greco, Lucrezia;
Buccino, Federica;
Xu, Zhuo;
Vergani, Laura;
Berto, Filippo;
Guagliano, Mario.
(2023)
Design and Analysis of Energy Absorbent Bioinspired Lattice Structures.
Journal of Bionic Engineering (JBE)
Academic article
-
Xu, Zhuo;
La Mendola, Irene;
Razavi, Nima;
Bagherifard, Sara.
(2023)
Additive manufactured Triply Periodical Minimal Surface lattice structures with modulated hybrid topology.
Engineering structures
Academic article
2021
-
Xu, Zhuo;
Razavi, Nima;
Ayatollahi, Majid R..
(2021)
Functionally graded lattice structures: Fabrication methods, mechanical properties, failure mechanisms and applications.
Elsevier
Chapter
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Medori, Elena;
Sarasini, Fabrizio;
Razavi, Nima.
(2021)
Quasi-static behavior of 3D printed lattice structures of various scales.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Thickness effect on the fracture behavior of structural components fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
Journal publications
-
Xu, Zhuo;
Tvenning, Terje;
Wu, Tao;
Razavi, Nima.
(2024)
Evaluating quasi-static and fatigue performance of IN718 gyroid lattice structures fabricated via LPBF: Exploring relative densities.
International Journal of Fatigue
Academic article
-
Occhipinti, Roberta;
Caggiani, Maria Cristina;
de Ferri, Lavinia;
Xu, Zhuo;
Steindal, Calin Constantin;
Razavi, Nima.
(2023)
Structural properties of volcanic precursors-based geopolymers before and after natural weathering.
Ceramics International
Academic article
-
Greco, Lucrezia;
Buccino, Federica;
Xu, Zhuo;
Vergani, Laura;
Berto, Filippo;
Guagliano, Mario.
(2023)
Design and Analysis of Energy Absorbent Bioinspired Lattice Structures.
Journal of Bionic Engineering (JBE)
Academic article
-
Xu, Zhuo;
La Mendola, Irene;
Razavi, Nima;
Bagherifard, Sara.
(2023)
Additive manufactured Triply Periodical Minimal Surface lattice structures with modulated hybrid topology.
Engineering structures
Academic article
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Medori, Elena;
Sarasini, Fabrizio;
Razavi, Nima.
(2021)
Quasi-static behavior of 3D printed lattice structures of various scales.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
-
Xu, Zhuo;
Fostervold, Rakel;
Razavi, Nima.
(2021)
Thickness effect on the fracture behavior of structural components fabricated via Fused Deposition Modeling.
Procedia Structural Integrity
Academic article
Part of book/report
-
Xu, Zhuo;
Razavi, Nima;
Ayatollahi, Majid R..
(2021)
Functionally graded lattice structures: Fabrication methods, mechanical properties, failure mechanisms and applications.
Elsevier
Chapter
Knowledge Transfer
2023
-
LectureOcchipinti, Roberta; Caggiani, Maria Cristina; de Ferri, Lavinia; Xu, Zhuo; Steindal, Calin Constantin; Razavi, Nima. (2023) Strength and durability studies on Mt. Etna volcanic precursors-based geopolymers. Università degli Studi di Bari Aldo Moro Convegno Nazionale sui Geopolimeri , Bari 2023-02-16 - 2023-02-17
-
PosterXu, Zhuo; Razavi, Nima; Wu, Tao; Berto, Filippo. (2023) Wall thickness effect on the quasi-static compression and fatigue properties of Inconel 718 sheet-based lattice structures fabricated via SLM . The Swedish Arena for Additive Manufacturing of Metals AM - Arena member days 2023 , Gothenburg 2023-03-08 - 2023-03-09
-
Academic lectureXu, Zhuo; Razavi, Nima; Branco, Ricardo; Borrego, Luís Miguel. (2023) Wall thickness and scale effect on the quasi-static compression and fatigue performance of lattice structures fabricated via Selective Laser Melting. The Swedish Arena for Additive Manufacturing of Metals PhD Network within the AM-Arena - Webinar , online 2023-02-14 - 2023-02-14
-
Academic lectureXu, Zhuo; Razavi, Nima; Lamendola, Irene; Bagherifard, Sara. (2023) Design and analysis of additively manufactured Triply Periodic Minimal Surface (TPMS) lattice structures with hybrid topology. Gruppo Italino Frattura ESIAM23 , Porto 2023-09-04 - 2023-09-06
2022
-
Academic lectureXu, Zhuo; Razavi, Nima; Branco, Ricardo; Borrego, Luis Miguel; Berto, Filippo. (2022) Quasi-static and fatigue properties of additively manufactured AlSi10Mg lattice of various scales . SIRAMM Reliability and Design of Additively Manufactured Materials RdAMM22 , Belgrade 2022-10-04 - 2022-10-07
-
LectureXu, Zhuo. (2022) Functionally graded lattice structures for the application of biomedical implantations. Tokyo University Norway-China-Japan-South Korea network for smart, safe and sustainable healthcare (NINJAS4CARE) , Tokyo 2022-10-16 - 2022-10-22
-
PosterXu, Zhuo; Razavi, Nima; Berto, Filippo. (2022) Wall thickness effect on the quasi-static compression and fatigue properties of Inconel 718 sheet-based lattice structures . European Structural Integrity Society - ESIS European Conference on Fracture - ECF23 , Madeira 2022-06-27 - 2022-07-02
-
Academic lectureXu, Zhuo; Razavi, Nima; Branco, Ricardo; Borrego, Luís Miguel; Berto, Filippo. (2022) Wall thickness, cubic size and scale effect on the quasi-static compression and fatigue performance of AlSi10Mg sheet-based lattice structures fabricated via Selective Laser Melting. European Structural Integrity Society - ESIS European Conference on Fracture - ECF23 , Madeira 2022-06-27 - 2022-07-02
2021
-
Academic lectureXu, Zhuo; Razavi, Nima; Sarasini, Fabrizio; Medori, Elena. (2021) The influence of various thicknesses and scales of lattice structures under compression loading. European Structural Integrity Society - ESIS ESIAM21 , online 2021-09-08 - 2021-09-10
-
LectureXu, Zhuo; Fostervold, Rakel; Razavi, Nima. (2021) Thickness and scale effect on the mechanical behavior of PLA specimens fabricated via FDM. European Structural Integrity Society - ESIS ESIAM21 , online 2021-09-08 - 2021-09-10