2024

• Gouttebroze, Sylvain; Friis, Jesper; Hovig, Even Wilberg; Boivie, Klas Magnus. (2024) Towards semantic standard and process ontology for additive manufacturing.
  Academic chapter/article/Conference paper
• Bunaziv, Ivan; Hovig, Even Wilberg; Brizuela, Omar Emmanuel Godinez; Zhang, Kai; Ma, Xiang; Ren, Xiaobo. (2024) CFD modeling for predicting imperfections in laser welding and additive manufacturing of aluminum alloys. Journal of laser applications
  Academic article
• Du, Qiang; M'Hamdi, Mohammed; Reiersen, Magnus; Hovig, Even Wilberg; Zhang, Kai. (2024) A fully kinetic phase diagram-coupled multicomponent columnar-to-equiaxed grain transition model with an application to additive manufacturing. Calphad
  Academic article
• Zhang, Kai; Wenner, Sigurd; Marioara, Calin Daniel; Hovig, Even Wilberg; Du, Qiang; Onsøien, Morten Ingar. (2024) Additive Manufacturing of 7xxx Aluminium Alloys by Laser Powder Bed Fusion. IOP Conference Series: Materials Science and Engineering
  Academic article

2023

• Bunaziv, Ivan; Ren, Xiaobo; Hagen, Anette Brocks; Hovig, Even Wilberg; Jevremovic, Ivana; Gulbrandsen-Dahl, Sverre. (2023) Laser beam remelting of stainless steel plate for cladding and comparison with conventional CMT process. The International Journal of Advanced Manufacturing Technology
  Academic article
• Gouttebroze, Sylvain; Friis, Jesper; Hovig, Even Wilberg; Boivie, Klas Magnus. (2023) Toward semantic standard and process ontology for Additive manufacturing. IOP Conference Series: Materials Science and Engineering
  Academic article
• Tareq, Foysal Kabir; Hovig, Even Wilberg; Aune, Ragnhild Elizabeth; Grasmo, Geir. (2023) Microstructure and Mechanical Properties of Arc-Melted NiSi11Cx Alloys.
  Academic chapter/article/Conference paper
• Ibrahim, Mohammad; Du, Qiang; Hovig, Even Wilberg; Grasmo, Geir; Hulme, Christopher; Aune, Ragnhild Elizabeth. (2023) Gas-Atomized Nickel Silicide Powders Alloyed with Molybdenum, Cobalt, Titanium, Boron, and Vanadium for Additive Manufacturing. Metals
  Academic article

2022

• Nes, Endre Verlo; Hovig, Even Wilberg; Feitosa, Leandro; Sørby, Knut. (2022) Effect of Building Orientation in Mechanical Properties of Ti6Al4V Produced with Laser Powder Bed Fusion.
  Academic chapter/article/Conference paper

2021

• Azar, Amin S.; Reiersen, Magnus; Hovig, Even Wilberg; M'hamdi, Mohammed; Diplas, Spyridon; Pedersen, Mikkel M.. (2021) A novel approach for enhancing the fatigue lifetime of the components processed by additive manufacturing technologies. Rapid prototyping journal
  Academic article
• Hovig, Even Wilberg; Sørby, Knut; Boivie, Klas Magnus; Azar, Amin S.. (2021) Anisotropy in Metals Processed by Laser Powder Bed Fusion: Elastic and plastic anisotropy in static and dynamic mechanical loading. Norges teknisk-naturvitenskapelige universitet Norges teknisk-naturvitenskapelige universitet
  Doctoral dissertation
• Hovig, Even Wilberg; Azar, Amin S.; Solberg, Klas; Sørby, Knut. (2021) An investigation of the anisotropic properties of heat-treated maraging steel grade 300 processed by laser powder bed fusion. The International Journal of Advanced Manufacturing Technology
  Academic article
• Brøtan, Vegard; Arbo, Siri Marthe; Hovig, Even Wilberg; Boivie, Klas Magnus. (2021) Additiv produksjon kan gi mer bærekraftige produkter med mindre avfall. SINTEF blogg
  Popular scientific article
• Solberg, Klas; Hovig, Even Wilberg; Sørby, Knut; Berto, Filippo. (2021) Directional fatigue behaviour of maraging steel grade 300 produced by laser powder bed fusion. International Journal of Fatigue
  Academic article

2020

• Hovig, Even Wilberg; Sørby, Knut. (2020) Influence of Laser Scan Speed on the Relative Density and Tensile Properties of 18Ni Maraging Steel Grade 300. Lecture Notes in Electrical Engineering
  Academic article
• Hovig, Even Wilberg; Berg, Olav Åsebø; Aukrust, Trond; Solhaug, Harald. (2020) Effect of Heat Treatment on the Ductility of Inconel 718 Processed by Laser Powder Bed Fusion. Lecture Notes in Electrical Engineering
  Academic article
• Hovig, Even Wilberg; Azar, Amin S.; M'hamdi, Mohammed; Sørby, Knut. (2020) Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature. The Minerals, Metals & Materials Series
  Academic article

2019

• Hovig, Even Wilberg; Holm, Håkon Dehli; Sørby, Knut. (2019) Effect of Processing Parameters on the Relative Density of AlSi10Mg Processed by Laser Powder Bed Fusion.
  Academic chapter/article/Conference paper
• Hovig, Even Wilberg; Azar, Amin S.; Sunding, Martin Fleissner; Andreassen, Erik; Sørby, Knut. (2019) High cycle fatigue life estimation of materials processed by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article

2018

• Hovig, Even Wilberg; Azar, Amin S.; Sunding, Martin Fleissner; Sørby, Knut; M'hamdi, Mohammed; Andreassen, Erik. (2018) High cycle fatigue life estimation of AlSi10Mg processed by laser powder bed fusion. MATEC Web of Conferences
  Academic article
• Hovig, Even Wilberg; Sørby, Knut; Drønen, Per Erik. (2018) Metal Penetration in Additively Manufactured Venting Slots for Low-Pressure Die Casting. Lecture Notes in Electrical Engineering
  Academic article
• Hovig, Even Wilberg; Azar, Amin S.; Grytten, Frode; Sørby, Knut; Andreassen, Erik. (2018) Determination of Anisotropic Mechanical Properties for Materials Processed by Laser Powder Bed Fusion. Advances in Materials Science and Engineering
  Academic article

2016

• Hovig, Even Wilberg; Brøtan, Vegard; Sørby, Knut. (2016) Additive Manufacturing for Enhanced Cooling in Moulds for Casting.
  Academic chapter/article/Conference paper