Reignard Tan
+4773594549
Materialteknisk, 2-52a, Gløshaugen, Richard Birkelands vei 1a
About
Reignard Tan graduated with MSc in applied mechanics and mathematics with specialization in solid mechanics at the mathematical institute at the University of Oslo in 2013. He has since been working in the department for structural analysis in Multiconsult in Oslo. He obtained a PhD from the department of structural engineering from NTNU in 2019 on the topic of crack width calculation methods for large reinforced concrete shell structures financed by the Ferry Free E39 research project. He was appointed as adjunct associate professor in 2020 at the department of structural engineering at NTNU as part of the concrete group. He is an active member of the task group fib T2.1 and the RILEM committee TC 287-CCS, and has also contributed to the CEN WG1 on developing the revision of Eurocode 2.
He has vast experience in analysis and design of both onshore and offshore reinforced concrete structures. He has recent years had a special focus on developing methods for design of water retaining concrete structures, seismic analysis and design reinforced concrete shell structures and structural and service life assessments of deteriorated concrete structures subjected to corrosion and Alkali Silica Reactions.
Research
Reignard's research interests include: structural analysis, finite element modelling, concrete structures, deterioration of existing concrete stuctures, corrosion, alkali silika reaction, amongst others.
Publications
2025
-
Rojas, Guillem;
Kanstad, Terje;
Øverli, Jan Arve;
Tan, Jesus Reignard Medel.
(2025)
Structural Strength Analysis of FRC and Crack Width calculation method for hybrid R/FRC ties.
NTNU Norges teknisk-naturvitenskapelige universitet
NTNU Norges teknisk-naturvitenskapelige universitet
Doctoral dissertation
2024
-
Terjesen, Otto;
Pinto, Gianclaudio;
Kanstad, Terje;
Tan, Jesus Reignard Medel.
(2024)
Performance study of crack width calculation methods according to Eurocodes, fib model codes and the modified tension chord model.
Structural Concrete
Academic article
-
Terjesen, Otto;
Kanstad, Terje;
Tan, Jesus Reignard Medel.
(2024)
Simplified modified tension chord model: An alternative crack width calculation model to Eurocode 2 and fib model codes.
Structural Concrete
Academic article
2020
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2020)
A numerical investigation of the cracking behaviour of reinforced-concrete tie elements.
Magazine of Concrete Research
Academic article
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2020)
Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties.
Journal of Structural Engineering
Academic article
2019
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2019)
Modified cracked membrane model for consistent crack width predictions of reinforced concrete structures subjected to in-plane loading.
Engineering structures
Academic article
2018
-
Tan, Jesus Reignard Medel;
Eileraas, Kristoffer B.;
Opkvitne, Ola;
Zirgulis, Giedrius;
Hendriks, Max;
Geiker, Mette Rica.
(2018)
Experimental and theoretical investigation of crack width
calculation methods for RC ties.
Structural Concrete
Academic article
2017
-
Engen, Morten;
Tan, Jesus Reignard Medel.
(2017)
Crack width calculation methods for large concrete structures. Workshop proceedings No. 12.
Norsk betongforening
Norsk betongforening
Academic anthology/Conference proceedings
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Kanstad, Terje.
(2017)
Evaluation of crack width calculation methods according to Eurocode 2 and fib Model Code 2010 and suggestions to improvements.
Academic chapter/article/Conference paper
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Brekke, Dan-Evert;
Kanstad, Terje.
(2017)
Evaluation and improvement of crack width calculation method
for large concrete structures.
Academic chapter/article/Conference paper
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Kanstad, Terje.
(2017)
Evaluation of current crack width calculation methods according to Eurocode 2 and fib Model Code 2010.
Academic chapter/article/Conference paper
Journal publications
-
Terjesen, Otto;
Pinto, Gianclaudio;
Kanstad, Terje;
Tan, Jesus Reignard Medel.
(2024)
Performance study of crack width calculation methods according to Eurocodes, fib model codes and the modified tension chord model.
Structural Concrete
Academic article
-
Terjesen, Otto;
Kanstad, Terje;
Tan, Jesus Reignard Medel.
(2024)
Simplified modified tension chord model: An alternative crack width calculation model to Eurocode 2 and fib model codes.
Structural Concrete
Academic article
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2020)
A numerical investigation of the cracking behaviour of reinforced-concrete tie elements.
Magazine of Concrete Research
Academic article
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2020)
Analytical Calculation Model for Predicting Cracking Behavior of Reinforced Concrete Ties.
Journal of Structural Engineering
Academic article
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Kanstad, Terje.
(2019)
Modified cracked membrane model for consistent crack width predictions of reinforced concrete structures subjected to in-plane loading.
Engineering structures
Academic article
-
Tan, Jesus Reignard Medel;
Eileraas, Kristoffer B.;
Opkvitne, Ola;
Zirgulis, Giedrius;
Hendriks, Max;
Geiker, Mette Rica.
(2018)
Experimental and theoretical investigation of crack width
calculation methods for RC ties.
Structural Concrete
Academic article
Books
-
Engen, Morten;
Tan, Jesus Reignard Medel.
(2017)
Crack width calculation methods for large concrete structures. Workshop proceedings No. 12.
Norsk betongforening
Norsk betongforening
Academic anthology/Conference proceedings
Part of book/report
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Kanstad, Terje.
(2017)
Evaluation of crack width calculation methods according to Eurocode 2 and fib Model Code 2010 and suggestions to improvements.
Academic chapter/article/Conference paper
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Geiker, Mette Rica;
Brekke, Dan-Evert;
Kanstad, Terje.
(2017)
Evaluation and improvement of crack width calculation method
for large concrete structures.
Academic chapter/article/Conference paper
-
Tan, Jesus Reignard Medel;
Hendriks, Max;
Kanstad, Terje.
(2017)
Evaluation of current crack width calculation methods according to Eurocode 2 and fib Model Code 2010.
Academic chapter/article/Conference paper
Report
-
Rojas, Guillem;
Kanstad, Terje;
Øverli, Jan Arve;
Tan, Jesus Reignard Medel.
(2025)
Structural Strength Analysis of FRC and Crack Width calculation method for hybrid R/FRC ties.
NTNU Norges teknisk-naturvitenskapelige universitet
NTNU Norges teknisk-naturvitenskapelige universitet
Doctoral dissertation
Teaching
Courses
Outreach
2022
-
Academic lectureTerjesen, Otto; Kanstad, Terje; Tan, Jesus Reignard Medel. (2022) Application of NLFEA for crack width calculations in SLS. Computational Modelling of Concrete and Concrete Structures 2022-05-23 - 2022-05-26
-
Academic lectureTan, Jesus Reignard Medel; Lie, Roar; Engen, Morten. (2022) STRUCTURAL REANALYSIS SYSTEM FOR OFFSHORE CONCRETE PLATFORMS: CHALLENGES AND SOLUTIONS. fib Congress , Oslo 2022-06-12 - 2022-06-16
2019
-
Academic lectureTan, Jesus Reignard Medel. (2019) Calculation method for predicting skew cracks in RC structures. Design and construction of sustainable concrete structures: causes, calculation and consequences of cracks , Oslo 2019-10-16 - 2019-10-17
2018
-
Academic lectureTan, Jesus Reignard Medel; Hendriks, Max; Geiker, Mette Rica; Kanstad, Terje. (2018) Crack width calculation methods for large-scale concrete structures for the Ferry-Free E39. IABSE Conference – Engineering the Developing World 2018-04-25 - 2018-04-27
-
Academic lectureTan, Jesus Reignard Medel; Hendriks, Max; Kanstad, Terje. (2018) An investigation of the strain profile over the cover in reinforced concrete elements subjected to tension. fib Congress 2018 , Melbourne 2018-10-08 - 2018-10-11
2016
-
Academic lectureTan, Jesus Reignard Medel; Hendriks, Max; Geiker, Mette Rica; Brekke, Dan-Evert; Kanstad, Terje. (2016) Evaluation and Improvement of Calculation Methods for Large-Scale Concrete Structures in Service Limit States. 11th fib International PhD Symposium in Civil Engineering , Tokyo 2016-08-29 - 2016-08-31
-
Academic lectureTan, Jesus Reignard Medel. (2016) Diagonal Cracking and Excessive Deformations in Concrete Cantilever Bridges. 2nd Nordic miniseminar on Residual service life & capacity of detoriated concrete structures , Oslo 2016-06-01 - 2016-06-02