2018

• Stamatopoulos, Haris; Malo, Kjell Arne. (2018) Withdrawal of pairs of threaded rods with small edge distances and spacings. European Journal of Wood and Wood Products
  Academic article

2016

• Malo, Kjell Arne; Abrahamsen, RB; Bjertnæs, MA. (2016) Some structural design issues of the 14-storey timber framed building “Treet” in Norway. European Journal of Wood and Wood Products
  Academic article
• Stamatopoulos, Haris; Malo, Kjell Arne. (2016) Withdrawal stiffness of threaded rods embedded in timber elements. Construction and Building Materials
  Academic article

2015

• Labonnote, Nathalie; Rønnquist, Anders; Malo, Kjell Arne. (2015) Prediction of material damping in timber floors, and subsequent evaluation of structural damping. Materials and Structures
  Academic article
• Stamatopoulos, Haris; Malo, Kjell Arne. (2015) Characteristic withdrawal capacity and stiffness of threaded rods. INTER - International Network on Timber Engineering Research
  Academic article
• Stamatopoulos, Haris; Malo, Kjell Arne. (2015) Withdrawal capacity of threaded rods embedded in timber elements. Construction and Building Materials
  Academic article

2013

• Angst, Vanessa; Malo, Kjell Arne. (2013) Moisture-induced stresses in glulam cross sections during wetting exposures. Wood Science and Technology
  Academic article
• Labonnote, Nathalie; Rønnquist, Anders; Malo, Kjell Arne. (2013) Experimental evaluations of material damping in timber beams of structural dimensions. Wood Science and Technology
  Academic article
• Labonnote, Nathalie; Rønnquist, Anders; Malo, Kjell Arne. (2013) Semi-analytical prediction and experimental evaluation of material damping in wood panels. Holzforschung
  Academic article
• Labonnote, Nathalie; Rønnquist, Anders; Malo, Kjell Arne. (2013) Modified hysteretic damping model applied to Timoshenko timber beams. Computers & structures
  Academic article

2012

• Angst, Vanessa; Malo, Kjell Arne. (2012) The effect of climate variations on glulam - an experimental study. European Journal of Wood and Wood Products
  Academic article
• Angst, Vanessa; Malo, Kjell Arne. (2012) Effect of self-tapping screws on moisture induced stresses in glulam. Engineering structures
  Academic article

2011

• Malo, Kjell Arne; Siem, Jan Helge; Ellingsbø, Pål. (2011) Quantifying ductility in timber structures. Engineering structures
  Academic article

2010

• Angst, Vanessa; Malo, Kjell Arne. (2010) Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters. Holzforschung
  Academic literature review

2009

• Dahl, Kristian B.; Malo, Kjell A. (2009) Planar Strain Measurements on Wood Specimens. Experimental mechanics
  Academic article
• Dahl, Kristian B; Malo, Kjell A. (2009) Nonlinear shear properties of spruce softwood: experimental results. Wood Science and Technology
  Academic article
• Dahl, Kristian B; Malo, Kjell A. (2009) Linear shear properties of spruce softwood. Wood Science and Technology
  Academic article
• Dahl, Kristian B; Malo, Kjell A. (2009) Nonlinear shear properties of spruce softwood: Numerical analyses of experimental results. Composites Science And Technology
  Academic article

2003

• Børvik, Tore; Langseth, Magnus; Malo, Kjell A.; Hopperstad, Odd Sture. (2003) Effect of Target Thickness in Blunt Projectile Peneration of Weldox 460 E Steel Plates. International Journal of Impact Engineering
  Academic article

2002

• Børvik, Tore; Langseth, Magnus; Hopperstad, Odd Sture; Malo, Kjell A.. (2002) Preforation of 12 mm Thick Steel Plates by 20 mm diameter Projectiles with Blunt, Hemispherical and Conical Noses, Part I: Experimental Study. International Journal of Impact Engineering
  Academic article
• Lademo, Odd-Geir; Hopperstad, Odd Sture; Malo, Kjell A.; Pedersen, K.O.. (2002) Modelling of plastic anisotropy in heat-treated aluminium extrusions. Journal of Materials Processing Technology
  Academic article

2001

• Malo, Kjell A.. (2001) Water pressure chamber for static testing of panels. International Journal of Mechanical Sciences
  Academic article

1999

• Børvik, Tore; Langseth, Magnus; Hopperstad, Odd Sture; Malo, Kjell A.. (1999) Ballistic Penetration of Steel Plates. International Journal of Impact Engineering
  Academic article

1998

• Malo, Kjell A.; Hopperstad, Odd Sture; Lademo, Odd-Geir. (1998) Calibration of Anisotropic Yield Criteria Using Uniaxial Tension Tests and Bending Tests. Journal of Materials Processing Technology
  Academic article

1997

• Høiset, Stian; Hjertager, Bjørn Helge; Solberg, Tron; Malo, Kjell A.. (1997) Statistical estimation of loads from gas explosions. Journal of Loss Prevention in the Process Industries
  Academic article