Course - Introduction to surveying - GEOM1120
GEOM1120 - Introduction to surveying
About
This course is no longer taught and is only available for examination.
Course content
- Projection and Coordinate Systems
- Leveling hights
- Surveying with total stations
- Satellite surveying by RTK
- Basic laserscanning
- Simple manual computation of coordinates and heights
- Reports writing
- Types of error, their recognition, and prevention possibilities
- Standard deviation, the mean (average), normal dstribution
- Brief introduction to simple survey adjustment
Learning outcome
Knowledge
- give an account of current projections and coordinate systems
- know the structure of and be able to describe what the various surveying instruments can be used for
- give an account of sources of error when using the various surveying instruments
- assess accuracy using different surveying techniques
Skills
- perform height measurements with level element and calculate heights
- perform station establishment, surveying and launching with total station and be able to perform necessary coordinate calculations
- perform measurement and release using GNSS
- perform scanning with total station or dedicated laser scanner
General competence
- master basic use of metering equipment and software, ability to process data both manually and in software, write documentation and report
Learning methods and activities
- Lectures - Group work
- Task solution
- Guiding Mandatory activities: 5 compulsory work requirements must be approved to attend the exam.
Further on evaluation
Re-sit of digital written exam in March
Specific conditions
Admission to a programme of study is required:
Civil Engineering - Engineering (BIBYG-F)
Civil Engineering - Engineering (BIBYGG)
Course materials
- Skogseth, T. (2014). Grunnleggende landmåling. Oslo: Universitetsforlaget (ISBN: 978-82-05-44943-3)
Credit reductions
Course code | Reduction | From | To |
---|---|---|---|
GEOM1110 | 7.5 | AUTUMN 2021 |
No
Version: 1
Credits:
7.5 SP
Study level: Foundation courses, level I
Language of instruction: Norwegian
Location: Gjøvik
- Geomatics
Department with academic responsibility
Department of Manufacturing and Civil Engineering
Examination
- * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
For more information regarding registration for examination and examination procedures, see "Innsida - Exams"