Course - Strength Analyses - SKID2201
Strength Analyses
This course is no longer taught and is only available for examination.
About
About the course
Course content
- Bending moment, shear force and normal force distribution
- Static undetermined systems
- Stress analyses
- Load case definition
- Elasto-plastic analyses
- Failure mechanics
- Buckling of pillars and plates
Learning outcome
Knowledge: After completed module, the candidate is to have theoretical basis for the determination of: Bending moments, shear forces and normal force distribution diagrams
- Stress distribution on beam cross sections
- Pillar and plate buckling capacities
- Elasto-plastic conditions of beam systems
Skills: After completed module, the candidate is to have skills in application of:
- Methods for establishing bending moment, shear force and shear force distribution diagrams for static undetermined beam systems
- Manual methods for establishing stress distribution on beam sections
- Use of a digital tool to design beam constructions
- Manual methods for establishing elasto-plastic capacities in a system of beams
- Manual methods for establishing pillar and plate buckling capacities
Competence: After completed module, the candidate shall be competent in:
- Design of static problems with regards to geometry
- Boundary conditions
- Load application and section properties
- Determination of relevant dimensions and acceptance criteria for a static undetermined beam system
Learning methods and activities
Lectures, compulsory theoretical exercises and practical laboratory exercise in groups.
Compulsory assignments
- Oblig
Further on evaluation
Mandatory work requirements: 13 exercises are given, of which 11 are required to be submitted and approved in order to sit for the exam.
Allowed aids at exam: Technical formula books and calculators of own choice
Re-sit exam: Oral examination.
Re-sit exam: following semester.
Recommended previous knowledge
MEKA1001 Mechanics
Course materials
"Fasthetslære" by Fridtjov Irgens.
"Tekniske tabeller" by Jarle Johannessen.
Other tables and procedures are handed out during lectures.
Subject areas
- Machine Design
- Marine Structures
Contact information
Course coordinator
Department with academic responsibility
Examination
Examination
Examination arrangement: School exam
Ordinary examination - Autumn 2024
School exam
The specified room can be changed and the final location will be ready no later than 3 days before the exam. You can find your room location on Studentweb.