course-details-portlet

TBYG3012 - Infrastructural Engineering

About

Examination arrangement

Examination arrangement: Assignment and Written examination
Grade: Letters

Evaluation form Weighting Duration Examination aids Grade deviation
Assignment 15/100
Assignment 15/100
Assignment 15/100
Written examination 25/100 4 hours HJELPEMIDD
Written examination 30/100 4 hours HJELPEMIDD

Course content

Drinking Water Regulations. Water supply system, pressure zone division, leak detection. Use of EPANET for simulation. Pipe design and design of pipes according to NS3420. Sewage and sewage treatment. Sewage systems, storm water technology. Pump stations and pipes. Simulation and dimensioning vs. Mike Urban Mouse. renewal of pipes.
Roofs in road construction work; Novapoint with emphasis on the road module. Detailed planning. Impact. Mass and cost calculation. Road environment. Traffic Technique: Characteristics of traffic and road users. Traffic calculations, traffic volume. Traffic safety. Crossroads, settlement and capacity. Operation and maintenance. Reinforcement of road.
Introduction to area plans, execution of regulation plans and technical plans.

Learning outcome

KNOWLEDGE Road planning: The candidate will have knowledge about - geometric design and technical execution of roads and streets. - about the various elements of a traffic system. road planning at both overview and detail level - the characteristics of the traffic and road user, and know the use thereof in road safety work. - operation and maintenance of road and road equipment and knowing methods for reinforcing and repairing roads.

KNOWLEDGE Water and wastewater: The candidate must have knowledge about: - the drinking water regulations - leakage search - the water supply system design - drainage of wastewater - Waste water treatment - drainage systems design - Renoval of pipes.

Skills Road planning
The candidate should be able to - by using EDB tools design different alternatives for a longer roadmap, with emphasis on terrain adaptation, alignment and amount calculation. - Present plan and profile drawings adapted to different plan levels. - Evaluate the condition and calculate necessary reinforcement measures for existing road. - make calculations and assessments for the design of various cross-solutions - carry out cost calculations and impact assessments of a road project - apply current standards to assess measures for the operation and maintenance of existing road. - Make calculations and simple analyzes related to road safety work

SKILLS water and wastewater: The candidate should be able to: - Perform a pressure zone division - Perform simpler analyzes with Epanet - Perform pipeline design for pressure lines - Design pipes according to NS3420 - Perform calculations of stormwater and use stormwater management- Use the simulation software Mike Urban Mouse With the time area Method.

SKILLS Area planning: The candidate should be able to prepare a medium-level regulatory plan. The candidate should be able to prepare a technical plan related to a regulatory plan.

GENERAL COMPETENCE - The candidate must have good skills in the use of professional sources, professional methods, applicable laws and regulations, as well as standards for planning, engineering, construction, management, operation, maintenance. - The candidate should be able to participate in professional discussions within the relevant subject areas and share his / her knowledge and experience with others, both in Norwegian and English.

Learning methods and activities

Lecture, exercise and project work

Compulsory assignments

  • Arbeidskrav - øvinger

Further on evaluation

Continuation and voluntary repetition / improvement can be carried out for some sub-evaluations without requiring all sub-evaluations in a subject to be re-recorded. There is an opportunity to complain about partial assessments in this topic before all sub-evaluations have been completed.
Assistance for written exams: Certainly simple calculator - one of the types Casio fx-82ES PLUS, Casio FX-82EX, Citizen SR-270X, Citizen SR-270X College, Hewlett Packard

Specific conditions

Exam registration requires that class registration is approved in the same semester. Compulsory activities from previous semester may be approved by the department.

Admission to a programme of study is required:
Civil engineering (FTHINGBY)

Required previous knowledge

The course has a university degree: completed two first years at the bachelor's degree in civil engineering at NTNU Trondheim. The course also has access restrictions.

Course materials

VA-boka, Norska Vann 2014. Samling av veiledninger /retningslinjer/rapporter fra SFT, Miljøverndep., NKF, Norsk Vann, Mattilsynet, Folkehelsa m.fl. R.E.Petersen og S.Thorolfsson: Overvannsteknikk, HiST/NTNU 2007. Statens vegvesens håndbøker: N100 Veg- og gateutforming, N200 Vegbygging, N500 Vegtunneler; R761 Prosesskode 1, V710 Oversiktsplanlegging; R610 Standard for drift og vedlikehold; R700 Tegningsgrunnlag, V712 Konsekvensanalyser, V713 Trafikk-beregninger, V131 Veg og natur, N101 Rekkverk, V121 Geometrisk utforming av veg- og gatekryss, V120 Premisser for gedometrisk utforming av veger; Vegdirektoratrapport nr. 53 Lærebok i drift og vedlikehold av veger; Vianova AS: Novapoint Høgskolemateriell; Jens Bjørneboe, Småhusområder ISBN 9788253606897. Veileder reguleringsplaner, Miljøverndep. Veiledning til forskrift om kart, stedfestet informasjon
mm Miljøverndep.

Credit reductions

Course code Reduction From To
BYGT2321 7.5 01.09.2019
More on the course

No

Facts

Version: A
Credits:  20.0 SP
Study level: Third-year courses, level III

Coursework

Term no.: 1
Teaching semester:  AUTUMN 2020

Language of instruction: Norwegian

Location: Trondheim , Trondheim

Subject area(s)
  • Engineering Subjects
Contact information
Course coordinator: Lecturer(s):

Department with academic responsibility
Department of Civil and Environmental Engineering

Phone:

Examination

Examination arrangement: Assignment and Written examination

Term Status code Evaluation form Weighting Examination aids Date Time Digital exam Room *
Autumn ORD Assignment 15/100 INSPERA
Room Building Number of candidates
Spring UTS Assignment 15/100 INSPERA
Room Building Number of candidates
Autumn ORD Assignment 15/100 INSPERA
Room Building Number of candidates
Spring UTS Assignment 15/100 INSPERA
Room Building Number of candidates
Autumn ORD Assignment 15/100 INSPERA
Room Building Number of candidates
Spring UTS Assignment 15/100 INSPERA
Room Building Number of candidates
Autumn ORD Written examination 25/100 HJELPEMIDD 09:00
Room Building Number of candidates
Spring UTS Written examination 25/100 HJELPEMIDD 09:00
Room Building Number of candidates
Autumn ORD Written examination 30/100 HJELPEMIDD 09:00 INSPERA
Room Building Number of candidates
Spring UTS Written examination 30/100 HJELPEMIDD 09:00
Room Building Number of candidates
  • * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
Examination

For more information regarding registration for examination and examination procedures, see "Innsida - Exams"

More on examinations at NTNU