2026

• Foti, Pietro; Astaraee, Asghar Heydari; Bagherifard, Sara; Plessis, Anton du; Wan, Di; Berto, Filippo. (2026) Fatigue performance of Ti6Al4V lattices: relative density as a partial quantitative predictor. International Journal of Fatigue
  Academic article
• Sadeghian, Hadi; Ayatollahi, Majid R.; Razavi, Nima. (2026) Enhancing fracture resistance of AM parts via the Concurrent Channel Reinforcement method: A Study of manufacturing parameters and loading conditions. Thin-walled structures
  Academic article

2025

• Berghaus, Michael; Razavi, Nima; Apmann, Hilmar; Hehl, Axel von. (2025) Effect of laser incidence angle on surface roughness and fatigue properties of PBF-LB/316L. Progress in Additive Manufacturing
  Academic article
• Campari, Alessandro; Konert, Florian; Razavi, Nima; Sobol, Oded; Alvaro, Antonio. (2025) Hydrogen-assisted cracking: A deep learning approach for fractographic analysis. Computational Materials Science
  Academic article
• Endrös, Paula; Deconinck, Liesbet; Razavi, Nima; Kapci, Mehmet Fazil; Johnsen, Roy; Lu, Xu. (2025) Hydrogen embrittlement in Ti–6Al–4V: A comparative review of conventional and additive manufacturing. International Journal of Hydrogen Energy
  Academic literature review
• Demiralay, Enes; Sgarbossa, Fabio; Silva, Daniel; Razavi, Nima. (2025) A Decision Support System for Identifying Cost-Effective Additive Manufacturing Process Option Considering Quality of Printed Parts. IFAC-PapersOnLine
  Academic article
• Sarkar, Aritra; Tråstadkjølen, Simen U.; Wilson, Håvard; Holmestad, Jon; Nyhus, Bård; Razavi, Nima. (2025) Influence of prior corrosion on fatigue behaviour in a simulated recycled 6082 Al-alloy. Materialia
  Academic article
• Celotto, Ambra; Razavi, Nima; Holmestad, Randi; Berto, Filippo; Vullum, Per Erik. (2025) In-Situ Studies of Conventional and Microscale FIB-assisted Methods for Cold Welding of Dissimilar Conductive Materials. NTNU Norges teknisk-naturvitenskapelige universitet NTNU Norges teknisk-naturvitenskapelige universitet
  Doctoral dissertation
• Myhre, Aleksander Omholt; Razavi, Nima; Alvaro, Antonio. (2025) Effect of Hydrogen on Mechanical Performance of Vintage and Modern Pipeline Steels. NTNU Norges teknisk-naturvitenskapelige universitet NTNU Norges teknisk-naturvitenskapelige universitet
  Doctoral dissertation
• Spiller, Saveria; Razavi, Nima. (2025) Quasi-static and fatigue behavior of 316L stainless steel produced via material extrusion additive manufacturing: Insights from subtracted small-scale specimens. Materials Science & Engineering: A
  Academic article
• Razavi, Nima; Sadeghian, Hadi; Ayatollahi, Majid reza. (2025) Concurrent channel reinforcement: A novel reinforcing procedure for polymeric structures fabricated via material extrusion technique. Thin-walled structures
  Academic article
• Lipiäinen, Kalle; Ahola, Antti; Lund, Hannu; Penttilä, Sakari; Razavi, Nima; Skriko, Tuomas. (2025) Fatigue strength assessment of additively manufactured component considering local quality. Welding in the World
  Academic article

2024

• Sadeghian, Hadi; Ayatollahi, Majid Reza; Khosravani, Mohammad Reza; Razavi, Nima. (2024) From prototyping to functional parts: A review of mechanical reinforcing procedures for polymeric parts fabricated via material extrusion. Journal of Manufacturing Processes
  Academic literature review
• Xu, Zhuo; Tvenning, Terje; Wu, Tao; Razavi, Nima. (2024) Evaluating quasi-static and fatigue performance of IN718 gyroid lattice structures fabricated via LPBF: Exploring relative densities. International Journal of Fatigue
  Academic article
• Giannini, Leonardo; Razavi, Nima; Alvaro, Antonio; Paltrinieri, Nicola. (2024) Embrittlement, degradation, and loss prevention of hydrogen pipelines. MRS bulletin
  Academic article
• Borrelli, R.; Bellini, C.; Berto, Filippo; Cocco, Cocco Di; Foti, Pietro; Iacoviello, F.. (2024) The impact of Ti6Al4V powder reuse on the quality of electron beam powder bed fusion parts. Progress in Additive Manufacturing
  Academic article
• Xu, Zhuo; Sarasini, Fabrizio; Medori, Elena; Berto, Filippo; Razavi, Nima. (2024) Scale-dependent mechanical performance variations in polylactic acid lattice structures fabricated via additive manufacturing. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Avanzini, Andrea; Tomasoni, Matteo; Xu, Zhuo; Berto, Filippo; Razavi, Nima. (2024) Fracture assessment of polyamide 12 (PA12) specimens fabricated via Multi Jet Fusion(TM) in the presence of geometrical discontinuities. Engineering Fracture Mechanics
  Academic article
• Demiralay, Enes; Sgarbossa, Fabio; Razavi, Nima. (2024) A Framework to Assess the Impact of Recycled or Reused Metal Powder on Circular Additive Manufacturing. IFAC-PapersOnLine
  Academic article
• Bologna, Omar; Cecchel, Silvia; Cornacchia, Giovanna; Avanzini, Andrea; Sepe, Raffaele; Berto, Filippo. (2024) Investigating post-processing impact on fatigue performance of LPBF Ti6Al4V with heat treatment, high pressure heat treatment, and dry electropolishing strategies. International Journal of Fatigue
  Academic article
• Sarkar, Aritra; Aktunali, Mehmet; Arbo, Siri Marthe; Holmestad, Jon; Viespoli, Luigi Mario; Nyhus, Bård. (2024) A study on the influence of impurity content on fatigue endurance in a 6082 Al-alloy. International Journal of Fatigue
  Academic article
• Spiller, Saveria; Couto, Sara Patricia Pereira; Razavi, Nima. (2024) Fracture Analysis of 316L Specimens Fabricated via Material Extrusion Additive Manufacturing: Influence of Building Orientation and Notch Acuity. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Xu, Zhuo; Razavi, Nima. (2024) Exploring the impact of thickness, scale and printing sequence on the tensile and fracture properties of PLA specimens fabricated via fused deposition modeling. Engineering Failure Analysis
  Academic article

2023

• Sarkar, Aritra; Razavi, Nima; Ringen, Geir; Welo, Torgeir. (2023) Assessing the fatigue behaviour of recycled Al-alloys: A critical review. Materialia
  Academic article
• Demiralay, Enes; Razavi, Nima; Kucukkoc, Ibrahim; Peron, Mirco. (2023) An Environmental Decision Support System for Determining On-site or Off-site Additive Manufacturing of Spare Parts.
  Academic chapter/article/Conference paper
• Razavi, Nima; Bagherifard, Sara; Hafnor, Sondre; Spiller, Saveria; Guagliano, Mario; Berto, Filippo. (2023) Fatigue analysis of as-built and heat-treated severely notched AlSi10Mg alloy specimens made by laser powder bed fusion technology. International Journal of Fatigue
  Academic article
• Vălean, Estera; Foti, Pietro; Razavi, Nima; Berto, Filippo; Marșavina, Liviu. (2023) Static and fatigue behavior of 3D printed PLA and PLA reinforced with short carbon fibers. Journal of Mechanical Science and Technology
  Academic article
• Ermakova, Anna; Braithwaite, Jarryd; Razavi, Nima; Ganguly, Supriyo; Berto, Filippo; Mehmanparast, Ali. (2023) The influence of laser shock peening on corrosion-fatigue behaviour of wire arc additively manufactured components. Surface & Coatings Technology
  Academic article
• Aramian, Atefeh; Sadeghian, Zohreh; Narimani, Mohammad; Razavi, Nima; Berto, Filippo. (2023) A review on the microstructure and properties of TiC and Ti(C,N) based cermets. International Journal of Refractory Metals and Hard Materials
  Academic literature review
• Xu, Zhuo; Mendola, Irene La; Razavi, Nima; Bagherifard, Sara. (2023) Additive manufactured Triply Periodical Minimal Surface lattice structures with modulated hybrid topology. Engineering structures
  Academic article
• Greco, Lucrezia; Buccino, Federica; Xu, Zhuo; Vergani, Laura; Berto, Filippo; Guagliano, Mario. (2023) Design and Analysis of Energy Absorbent Bioinspired Lattice Structures. Journal of Bionic Engineering (JBE)
  Academic article
• Marsavina, Liviu; Moreira, Pedro; Berto, Filippo; Gao, Chao; Razavi, Nima. (2023) Editorial VSI Fracture behavior of additively manufactured materials and structures. Engineering Fracture Mechanics
  Editorial
• Ermakova, Anna; Razavi, Nima; Cabeza, Sandra; Gadalinska, Elzbieta; Reid, Mark; Paradowska, Anna. (2023) The effect of surface treatment and orientation on fatigue crack growth rate and residual stress distribution of wire arc additively manufactured low carbon steel components. Journal of Materials Research and Technology (JMR&T)
  Academic article
• Occhipinti, Roberta; Caggiani, Maria Cristina; Ferri, Lavinia de; Xu, Zhuo; Steindal, Calin Constantin; Razavi, Nima. (2023) Structural properties of volcanic precursors-based geopolymers before and after natural weathering. Ceramics International
  Academic article
• Nabavi-Kivi, A.; Ayatollahi, Majid R.; Razavi, Nima. (2023) Investigating the effect of raster orientation on fracture behavior of 3D-printed ABS specimens under tension-tear loading. European Journal of Mechanics. A, Solids
  Academic article
• Bellini, C; Berto, Filippo; Borrelli, R; Cocco, V Di; Franchitti, S; Iacoviello, F. (2023) Effects of recycling on defects and microstructure in Ti-6Al-4V powder particles and samples fabricated by Electron Beam Melting process. Procedia Structural Integrity
  Academic article
• Ermakova, Anna; Razavi, Nima; Crescenzo, Rocco; Berto, Filippo; Mehmanparast, Ali. (2023) Fatigue life assessment of wire arc additively manufactured ER100S-1 steel parts. Progress in Additive Manufacturing
  Academic article
• Morettini, Giulia; Razavi, Nima; Staffa, A; Palmieri, M; Berto, Filippo; Cianetti, F. (2023) On the combined use of averaged strain energy density criteria (ASED) and equivalent material concept (ECC) for the fracture load prediction of additively manufactured PLA v-notched specimens. Procedia Structural Integrity
  Academic article
• Dezianian, Shokouh; Azadi, Mohammad; Razavi, Nima. (2023) Topology optimization on metamaterial cells for replacement possibility in non-pneumatic tire and the capability of 3D-printing. PLOS ONE
  Academic article
• Foti, Pietro; Razavi, Nima; Fatemi, Ali; Berto, Filippo. (2023) Multiaxial fatigue of additively manufactured metallic components: A review of the failure mechanisms and fatigue life prediction methodologies. Progress in Materials Science
  Academic literature review
• Spiller, Saveria; Kolstad, Sondre Olsøybakk; Razavi, Nima. (2023) Fatigue behavior of 316L stainless steel fabricated via Material Extrusion Additive Manufacturing. Engineering Fracture Mechanics
  Academic article

2022

• Torabi, A.R.; Ayatollahi, M.R.; Berto, Filippo; Razavi, Nima. (2022) Experimental Verification of the Averaged Strain Energy Density Criterion for Brittle Fracture in Blunt V-Notches under Pure Compression. Strength of Materials
  Academic article
• Razavi, Nima; Nabavi-Kivi, Amir; Ayatollahi, Majid R.. (2022) Mixed-mode fracture prediction of acrylonitrile butadiene styrene material fabricated via fused deposition modeling. Proceedings of the Institution of mechanical engineers. Part L, journal of materials
  Academic article
• Marșavina, Liviu; Vălean, Cristina; Mărghitaș, Mihai; Linul, Emanoil; Razavi, Nima; Berto, Filippo. (2022) Effect of the manufacturing parameters on the tensile and fracture properties of FDM 3D-printed PLA specimens. Engineering Fracture Mechanics
  Academic article
• Ermakova, Anna; Ganguly, Supriyo; Razavi, Nima; Berto, Filippo; Mehmanparast, Ali. (2022) Corrosion-fatigue crack growth behaviour of wire arc additively manufactured ER100S-1 steel specimens. Engineering Failure Analysis
  Academic article
• Rezaeian, Parham; Ayatollahi, Majid R.; Nabavi-Kivi, A.; Razavi, Nima. (2022) Effect of printing speed on tensile and fracture behavior of ABS specimens produced by fused deposition modeling. Engineering Fracture Mechanics
  Academic article
• Wu, W; Xia, R; Qian, G; Liu, Z; Razavi, Nima; Berto, Filippo. (2022) Mechanostructures: rational mechanical design, fabrication, performance evaluation, and industrial application of advanced structures. Progress in Materials Science
  Academic literature review
• Spiller, Saveria; Kolstad, Sondre Olsøybakk; Razavi, Nima. (2022) Fabrication and characterization of 316L stainless steel components printed with material extrusion additive manufacturing. Procedia Structural Integrity
  Academic article
• Ermakova, Anna; Razavi, Nima; Berto, Filippo; Mehmanparast, Ali. (2022) Uniaxial and multiaxial fatigue behaviour of wire arc additively manufactured ER70S-6 low carbon steel components. International Journal of Fatigue
  Academic article
• Spiller, Saveria; Berto, Filippo; Razavi, Nima. (2022) Mechanical behavior of Material Extrusion Additive Manufactured components: an overview. Procedia Structural Integrity
  Academic literature review
• Sepe, Raffaele; Giannella, V; Razavi, Nima; Berto, Filippo. (2022) Characterization of static, fatigue and fracture behaviour of the aluminium-lithium alloy Al-Li 2198-T851. International Journal of Fatigue
  Academic article
• Foti, Pietro; Mocanu, LP; Razavi, Nima; Bellini, C; Borrelli, R; Cocco, V Di. (2022) Effect of recycling powder on the fatigue properties of AM Ti6Al4V. Procedia Structural Integrity
  Academic article
• Cecchel, Silvia; Razavi, Nima; Mega, Francesco; Cornacchia, Giovanna; Avanzini, Andrea; Battini, Davide. (2022) Numerical, Mechanical, and Metallurgical analyses of an innovative lightweight titanium conrod additively manufactured. Procedia Structural Integrity
  Academic article
• Aliha, Mohammad Reza Mohammad; Kucheki, HG; Razavi, Nima. (2022) In-plane fracture analysis of bi-material adhesively bonded joints by using a simple bend beam specimen. Procedia Structural Integrity
  Academic article
• Bellini, C; Berto, Filippo; Cocco, V Di; Franchitti, S; Iacoviello, Francesco; Mocanu, Larisa Patricia. (2022) Effect of recycling on internal and external defects of Ti-6Al-4V powder particles for electron beam melting process. Procedia Structural Integrity
  Academic article
• Seibert, Paul Dominic; Taylor, David; Berto, Filippo; Razavi, Nima. (2022) Energy TCD - robust and simple failure prediction unifying the TCD and ASED criterion. Engineering Fracture Mechanics
  Academic article
• Razavi, Nima; Askes, H.; Berto, Filippo; Susmel, L.. (2022) Length scale parameters to estimate fatigue lifetime of 3D-printed titanium alloy Ti6Al4V containing notches in the as-manufactured condition. International Journal of Fatigue
  Academic article
• Maleki, Erfan; Bagherifard, Sara; Razavi, Nima; Riccio, Martina; Bandini, Michele; Plessis, Anton Du. (2022) Fatigue behaviour of notched laser powder bed fusion AlSi10Mg after thermal and mechanical surface post-processing. Materials Science & Engineering: A
  Academic article
• Maleki, E.; Bagherifard, S.; Razavi, Nima; Bandini, M.; Plessis, Plessis du; Berto, Filippo. (2022) On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg. International Journal of Fatigue
  Academic article
• Grbovic, Aleksandar; Sedmak, Aleksandar; Petrovski, Blagoj; Sghayer, Abulgasem; Sedmak, Simon; Razavi, Nima. (2022) Numerical simulation of fatigue crack growth in AA6156 T6 panels. Procedia Structural Integrity
  Academic article
• Ermakova, Anna; Ganguly, Supriyo; Razavi, Nima; Berto, Filippo; Mehmanparast, Ali. (2022) Corrosion-fatigue crack growth behaviour of wire arc additively manufactured ER70S-6 steel parts in marine environments. European Journal of Mechanics. A, Solids
  Academic article
• Nabavi-Kivi, A.; Ayatollahi, Majid R.; Rezaeian, Parham; Razavi, Nima. (2022) Investigating the effect of printing speed and mode mixity on the fracture behavior of FDM-ABS specimens. Theoretical and Applied Fracture Mechanics
  Academic article
• Plessis, Anton du; Razavi, Nima; Benedetti, Matteo; Murchio, Simone; Leary, Martin; Watson, Marcus. (2022) Properties and applications of additively manufactured metallic cellular materials: A review. Progress in Materials Science
  Academic literature review
• Salamina, Simone; Crivelli, Daniele; Diviani, Luca; Berto, Filippo; Razavi, Nima. (2022) Strain energy density approach as fatigue assessment of Ti6Al4V specimens machined by WEDM single step technology. International Journal of Fatigue
  Academic article
• Plessis, Anton Du; Razavi, Nima; Wan, Di; Berto, Filippo; Imdaadulah, Adam; Beamer, Chad. (2022) Fatigue performance of shelled additively manufactured parts subjected to hot isostatic pressing. Additive Manufacturing
  Academic article
• Cecchel, Silvia; Razavi, Nima; Mega, Francesco; Cornacchia, Giovanna; Avanzini, Andrea; Battini, Davide. (2022) Fatigue testing and end of life investigation of a topology optimized connecting rod fabricated via selective laser melting. International Journal of Fatigue
  Academic article

2021

• Razavi, Nima; Bordonaro, Giancarlo G.; Ferro, Paolo; Torgersen, Jan; Berto, Filippo. (2021) Porosity effect on tensile behavior of Ti-6Al-4V specimens produced by laser engineered net shaping technology. Proceedings of the Institution of mechanical engineers. Part C, journal of mechanical engineering science
  Academic article
• Aramian, Atefeh; Sadeghian, Zohreh; Wan, Di; Holovenko, Yaroslav; Razavi, Nima; Berto, Filippo. (2021) Microstructure and texture evolution during the manufacturing of in situ TiC-NiCr cermet through selective laser melting process. Materials Characterization
  Academic article
• Foti, Pietro; Razavi, Nima; Berto, Filippo. (2021) Fracture assessment of U-notched PMMA under mixed mode I/II loading conditions by means of local approaches. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Avanzini, A; Cornacchia, G; Giorleo, L; Berto, Filippo. (2021) Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by Selective Laser Melting. International Journal of Fatigue
  Academic article
• Wan, Di; Ma, Yan; Sun, Binhan; Razavi, Nima; Wang, Dong; Lu, Xu. (2021) Evaluation of hydrogen effect on the fatigue crack growth behavior of medium-Mn steels via in-situ hydrogen plasma charging in an environmental scanning electron microscope. Journal of Materials Science & Technology
  Academic article
• Morettini, Giulia; Braccesi, Claudio; Cianetti, Filippo; Razavi, Nima. (2021) Design and implementation of new experimental multiaxial random fatigue tests on astm-a105 circular specimens. International Journal of Fatigue
  Academic article
• Seibert, Paul Dominic; Susmel, L.; Berto, F.; Kästner, M.; Razavi, Nima. (2021) Applicability of strain energy density criterion for fracture prediction of notched PLA specimens produced via fused deposition modeling. Engineering Fracture Mechanics
  Academic article
• Razavi, Nima; Plessis, Anton Du; Berto, Filippo. (2021) Structural integrity III: energy-based fatigue prediction for complex parts.
  Academic chapter/article/Conference paper
• Mensah, R.A.; Shanmugam, Vigneshwaran; Narayanan, Sreenivasan; Razavi, Nima; Ulfberg, Adrian; Blanksvärd, Thomas. (2021) Biochar-Added Cementitious Materials—A Review on Mechanical, Thermal, and Environmental Properties. Sustainability
  Academic article
• Torabi, Ali reza; Saboori, Behnam; Berto, Filippo; Razavi, Nima. (2021) Strain Energy Density-Predicted Brittle Fracture of U-Notched Components under Combined Tension/Tear Loading. Strength of Materials
  Academic article
• Ermakova, Anna; Mehmanparast, Ali; Ganguly, Supriyo; Razavi, Nima; Berto, Filippo. (2021) Fatigue crack growth behaviour of wire and arc additively manufactured ER70S-6 low carbon steel components. International Journal of Fracture
  Academic article
• Albinmousa, Jafar; Peron, Mirco; Razavi, Nima; Hussain, M Al; Ghanim, A Al; Berto, Filippo. (2021) Experimental characterization and theoretical prediction of quasi-static fracture behavior of notched ZK60-T5 Mg samples. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Ermakova, Anna; Ganguly, Supriyo; Razavi, Nima; Berto, Filippo; Mehmanparast, Ali. (2021) Experimental investigation of the fatigue crack growth behavior in wire arc additively manufactured ER100S-1 steel specimens. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Bahadori, Robab; Ayatollahi, Majid reza; Razavi, Nima; Berto, Filippo. (2021) Geometry effects on mode I brittle fracture in U‐notched specimens. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Branco, Ricardo; Costa, JD; Borrego, LP; Berto, Filippo; Razavi, Nima; Macek, W. (2021) Comparison of different one-parameter damage laws and local stress-strain approaches in multiaxial fatigue life assessment of notched components. International Journal of Fatigue
  Academic article
• Aramian, Atefeh; Sadeghian, Zohreh; Razavi, Nima; Berto, Filippo. (2021) Room and High-Temperature Sliding Wear Behavior of In Situ TiC-Based Cermet Fabricated through Selective Laser Melting. Journal of materials engineering and performance (Print)
  Academic article
• Benedetti, M.; Plessis, Anton Du; Ritchie, R.O.; Dallago, M.; Razavi, Nima; Berto, Filippo. (2021) Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication. Materials science & engineering. R, Reports
  Academic literature review
• Kanyilmaz, Alper; Demir, AG; Chierici, M.; Berto, Filippo; Gardner, L; Kandukuri, SY. (2021) Role of Metal 3D Printing to Increase Quality and Resource-efficiency in the Construction Sector. Additive Manufacturing
  Academic literature review
• Bertolin, Chiara; Karvan, Poorya; Rosa, Andrea de; Razavi, Nima; Berto, Filippo. (2021) Relation between fracture characteristics and moisture content along longitudinal direction in a naturally drying Scots pine. Theoretical and Applied Fracture Mechanics
  Academic article
• Karvan, Poorya; Razavi, Nima; Berto, Filippo; Bertolin, Chiara. (2021) Energy density and fracture parameters of coated Scots pine. Construction and Building Materials
  Academic article
• Molaei, R; Fatemi, Ali; Razavi, Nima; Berto, Filippo. (2021) Fatigue and Fracture of Additively Manufactured Metallic Materials.
  Encyclopedia article
• Bellini, C; Berto, Filippo; Cocco, V Di; Iacoviello, Francesco; Mocanu, LP; Razavi, Nima. (2021) Additive manufacturing processes for metals and effects of defects on mechanical strength: a review. Procedia Structural Integrity
  Academic literature review
• Foti, Pietro; Razavi, Nima; Ayatollahi, M; Marsavina, L; Berto, Filippo. (2021) On the application of the volume free strain energy density method to blunt V-notches under mixed mode condition. Engineering structures
  Academic article
• Xu, Zhuo; Razavi, Nima; Ayatollahi, Majid R.. (2021) Functionally graded lattice structures: Fabrication methods, mechanical properties, failure mechanisms and applications.
  Chapter
• Xu, Zhuo; Fostervold, Rakel; Razavi, Nima. (2021) Scale effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling. Procedia Structural Integrity
  Academic article
• Xu, Zhuo; Fostervold, Rakel; Razavi, Nima. (2021) Thickness effect on the mechanical behavior of PLA specimens fabricated via Fused Deposition Modeling. Procedia Structural Integrity
  Academic article
• Xu, Zhuo; Medori, Elena; Sarasini, Fabrizio; Razavi, Nima. (2021) Quasi-static behavior of 3D printed lattice structures of various scales. Procedia Structural Integrity
  Academic article
• Xu, Zhuo; Fostervold, Rakel; Razavi, Nima. (2021) Thickness effect on the fracture behavior of structural components fabricated via Fused Deposition Modeling. Procedia Structural Integrity
  Academic article
• Neisiany, Rasoul Esmaeely; Khorasani, Saied Nouri; Lee, Jeremy Kong Yoong; Razavi, Nima; Enayati, Mohammad Saeid; Naeimirad, Mohammadreza. (2021) Core-shell nanofibers for developing self-healing materials: Recent progress and future directions. Material Design & Processing Communications (MDPC)
  Academic article
• Ganesan, V; Shanmugam, Vigneshwaran; Kaliyamoorthy, B; Sanjeevi, S; Shanmugam, SK; Alagumalai, V. (2021) Optimisation of Mechanical Properties in Saw-Dust/Woven-Jute Fibre/Polyester Structural Composites under Liquid Nitrogen Environment Using Response Surface Methodology. Polymers
  Academic article
• Razavi, Nima; neisiany, Rasoul Esmaeely; Razavi, Moe; Fakhar, Afsaneh; Shanmugam, Vigneshwaran; Alagumalai, V. (2021) Efficient Improvement in Fracture Toughness of Laminated Composite by Interleaving Functionalized Nanofibers. Polymers
  Academic article
• Shanmugam, Vigneshwaran; Marimuthu, Uthayakumar; Rajendran, Sundarakannan; Veerasimman, Arumugaprabu; Basha, A Mahaboob; Majid, MS Bin Abdul. (2021) Experimental Investigation of Thrust Force, Delamination and Surface Roughness in Drilling Hybrid Structural Composites. Materials
  Academic article

2020

• Plessis, Anton Du; Razavi, Nima; Berto, Filippo. (2020) The effects of microporosity in struts of gyroid lattice structures produced by laser powder bed fusion. Materials & design
  Academic article
• Aramian, Atefeh; Razavi, Nima; Sadeghian, Zohreh; Berto, Filippo. (2020) A review of additive manufacturing of cermets. Additive Manufacturing
  Academic literature review
• Razavi, Nima; Ayatollahi, Majid reza; Shahmohammadi, M; Berto, Filippo. (2020) Geometry effect on fracture behavior of V-notched specimens. Procedia Structural Integrity
  Academic article
• Valean, C; Marsavina, L; Marghitas, M; Linul, E; Razavi, Nima; Berto, Filippo. (2020) Effect of manufacturing parameters on tensile properties of FDM printed specimens. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Berto, Filippo. (2020) Assessment of mixed mode fatigue crack growth under biaxial loading using an iterative technique. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Bale, Emil Scott; Berto, Filippo. (2020) Mechanical behavior of metallic fiber-reinforced adhesive under cyclic loading. Procedia Structural Integrity
  Academic article
• Foti, Pietro; Razavi, Nima; Marsavina, Liviu; Berto, Filippo. (2020) Volume Free Strain Energy Density Method for Applications to Blunt V-Notches. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Majidi, Hamid reza; Berto, Filippo. (2020) Brittle fracture prediction of key-hole notched specimens by means of J-integral expression. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Majidi, Hamid reza; Berto, Filippo; Ayatollahi, Majid reza. (2020) Fracture assessment of U-notched graphite specimens by means of cohesive zone model. Procedia Structural Integrity
  Academic article
• Branco, R; Costa, J.D.; Borrego, L.P.; Berto, Filippo; Razavi, Nima; Macek, W. (2020) Multiaxial fatigue life assessment in notched components based on the effective strain energy density. Procedia Structural Integrity
  Academic article
• Aramian, Atefeh; Sadeghian, Zohreh; Razavi, Nima; Prashanth, Konda Gokuldoss; Berto, Filippo. (2020) Effect of selective laser melting process parameters on microstructural and mechanical properties of TiC–NiCr cermet. Ceramics International
  Academic article
• Ermakova, Anna; Mehmanparast, Ali; Ganguly, Supriyo; Razavi, Nima; Berto, Filippo. (2020) Investigation of mechanical and fracture properties of wire and arc additively manufactured low carbon steel components. Theoretical and Applied Fracture Mechanics
  Academic article
• Razavi, Nima; Hooreweder, Brecht Van; Berto, Filippo. (2020) Effect of build thickness and geometry on quasi-static and fatigue behavior of Ti-6Al-4V produced by Electron Beam Melting. Additive Manufacturing
  Academic article
• Morettini, Giulia; Braccesi, Claudio; Cianetti, Filippo; Razavi, Nima; Solberg, Klas; Capponi, Lorenzo. (2020) Collection of experimental data for multiaxial fatigue criteria verification. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Zamzami, I Al; Razavi, Nima; Berto, Filippo; Susmel, Luca. (2020) The Critical Distance Method to estimate the fatigue strength of notched additively manufactured titanium. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Bale, Emil Scott; Berto, Filippo; Bertolin, Chiara. (2020) Mechanical behavior of metallic fiber-reinforced adhesive under dynamic loading. Procedia Structural Integrity
  Academic article
• Valean, C; Marsavina, Liviu; Marghitas, M; Linul, E; Razavi, Nima; Berto, Filippo. (2020) The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness. Procedia Structural Integrity
  Academic article
• Seibert, Paul Dominic; Razavi, Nima; Susmel, Luca; Berto, Filippo; Kastner, Markus. (2020) Validation of the average strain energy density criterion for additively manufactured notched polylactide acid specimens. Procedia Structural Integrity
  Academic article
• Berto, Filippo; Fatemi, Ali; Shamsaei, Nima; Razavi, Nima. (2020) Fatigue Assessment of 17-4 PH Stainless Steel Notched Specimens Made by Direct Metal Laser Sintering.
  Academic chapter/article/Conference paper
• Ferro, Paolo; Meneghello, Roberto; Razavi, Nima; Berto, Filippo; Savio, G.. (2020) Porosity Inducing Process Parameters in Selective Laser Melted AlSi10Mg Aluminium Alloy. Physical Mesomechanics
  Academic article
• Bertolin, Chiara; Ferri, Lavinia De; Razavi, Nima; Berto, Filippo. (2020) Acoustic Emission NDT for monitoring hygro-mechanical reactions of coated pine wood: a methodological approach. Procedia Structural Integrity
  Academic article

2019

• Majidi, Hamid Reza; Torabi, Ali reza; Zabihi, Majed; Razavi, Nima; Berto, Filippo. (2019) Energy-based ductile failure predictions in cracked friction-stir welded joints. Engineering Failure Analysis
  Academic article
• M, Rezania; M, Panahandeh; Razavi, Nima; Berto, Filippo. (2019) Experimental study of the simultaneous effect of nano-silica and nano-carbon black on permeability and mechanical properties of the concrete. Theoretical and Applied Fracture Mechanics
  Academic article
• Zivkovic, Jelena; Razavi, Nima; Berto, Filippo; Øverli, Jan Arve. (2019) Effect of loading rate on the fracture energy of lightweight aggregate concrete subjected to three-point bending test.
  Academic chapter/article/Conference paper
• Ferro, Paolo; Meneghello, R; Razavi, Nima; Berto, Filippo; Gianpaolo, G. (2019) Porosity inducing process parameters in selective laser melted AlSilOMg aluminium alloy. Physical Mesomechanics
  Academic article
• Berto, Filippo; Razavi, Nima. (2019) Fatigueless structures inspired by Nature: a case study. Material Design & Processing Communications (MDPC)
  Academic article
• Malikova, Lucie; Razavi, Nima; Berto, Filippo. (2019) Crack propagation in a brittle DCB specimen assessed by means of the Williams? power expansion. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Berto, Filippo. (2019) Directed Energy Deposition versus Wrought Ti-6Al-4V: A Comparison of Microstructure, Fatigue Behavior, and Notch Sensitivity. Advanced Engineering Materials
  Academic article
• Razavi, Nima; Berto, Filippo. (2019) A new fixture for fracture tests under mixed mode I/II/III loading. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Morettini, Giulia; Razavi, Nima; Zucca, Guido. (2019) Effects of build orientation on fatigue behavior of Ti-6Al-4V as-built specimens produced by direct metal laser sintering. Procedia Structural Integrity
  Academic article
• Torabi, A.R.; Razavi, Nima; Berto, Filippo; Ayatollahi, Majid R. (2019) On Suitability of the Averaged Strain Energy Density Criterion in Predicting Mixed Mode I/Ii Brittle Fracture of Blunt V-Notches with Negative Mode I Contributions. Strength of Materials
  Academic article
• Solberg, Klas; Guan, Shuai; Razavi, Nima Javad; Welo, Torgeir; Chan, Kang Cheung; Berto, Filippo. (2019) Fatigue of additively manufactured 316L stainless steel: The influence of porosity and surface roughness. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article

2018

• Razavi, Nima; Bordonaro, Giancarlo; Ferro, Paolo; Berto, Filippo. (2018) Fatigue assessment of semi-circular notched specimens produced by Laser Engineered Net Shaping method. MATEC Web of Conferences
  Academic article
• Bressan, Stefano; Razavi, Nima; Berto, Filippo. (2018) Based on energy approach for the fatigue life evaluation of micrometric-sized single-crystal silicon notched specimens. Theoretical and Applied Fracture Mechanics
  Academic article
• Torabi, Ali reza; Berto, Filippo; Razavi, Nima. (2018) Ductile failure prediction of thin notched aluminum plates subjected to combined tension-shear loading. Theoretical and Applied Fracture Mechanics
  Academic article
• Razavi, Nima; R, EsmaeelyNeisiany; MR, Ayatollahi; S, Ramakrishna; S, NouriKhorasani; Berto, Filippo. (2018) Fracture assessment of polyacrylonitrile nanofiber-reinforced epoxy adhesive. Theoretical and Applied Fracture Mechanics
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Samari, Majid; silva, Lucas f. m. Da. (2018) Effect of interface non-flatness on the fatigue behavior of adhesively bonded single lap joints. Proceedings of the Institution of mechanical engineers. Part L, journal of materials
  Academic article
• Razavi, Nima Javad; Sandnes, Lise; Torgersen, Jan; Berto, Filippo. (2018) The effect of fiber orientation on fracture response of metallic fiber-reinforced adhesive thin films. Theoretical and Applied Mechanics Letters
  Academic article
• Razavi, Nima Javad; Berto, Filippo; Torgersen, Jan. (2018) Frontiers of fracture and fatigue: Some recent applications of the local strain energy density. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Ayatollahi, M.R.; Berto, Filippo. (2018) Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation. Procedia Structural Integrity
  Academic article
• Ayatollahi, M.R.; Razavi, Nima; Berto, Filippo. (2018) Crack path stability in brittle fracture under pure mode i loading. Procedia Structural Integrity
  Academic article
• Saboori, Behnam; Torabi, Ali reza; Berto, Filippo; Razavi, Nima. (2018) Averaged strain energy density to assess mixed mode I/III fracture of U-notched GPPS samples. Structural Engineering and Mechanics
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; giv, Ali Nemati; Khoramishad, Hadi. (2018) Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes. International Journal of Adhesion and Adhesives
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Berto, Filippo. (2018) A synthesis of geometry effect on brittle fracture. Engineering Fracture Mechanics
  Academic article
• Acanfora, M; Gallo, Pasquale; Razavi, Nima; Ayatollahi, Majid reza; Berto, Filippo. (2018) Numerical Evaluation of T-stress under Mixed Mode Loading Through the Use of Coarse Meshes. Physical Mesomechanics
  Academic article
• Razavi, Nima; Bordonaro, Giancarlo; Ferro, Paolo; Torgersen, Jan; Berto, Filippo. (2018) Fatigue behavior of porous Ti-6Al-4V made by laser-engineered net shaping. Materials
  Academic article
• giv, Ali Nemati; Ayatollahi, Majid reza; Razavi, Nima; Khoramishad, Hadi. (2018) The effect of orientations of metal macrofiber reinforcements on mechanical properties of adhesively bonded single lap joints. The journal of adhesion
  Academic article
• Razavi, Nima; neisiany, Rasoul Esmaeely; khorasani, Saied Nouri; Ramakrishna, Seeram; Berto, Filippo. (2018) Effect of neat and reinforced polyacrylonitrile nanofibers incorporation on interlaminar fracture toughness of carbon/epoxy composite. Theoretical and Applied Mechanics Letters
  Academic article
• Abbas, I.A.; Razavi, Nima. (2018) A Mode I Crack Problem for a Thermoelastic Fibre-Reinforced Anisotropic Material Using Finite Element Method. Physical Mesomechanics
  Academic article
• Peng, D; Jones, R; Berto, Filippo; Razavi, Nima. (2018) Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Esmaeili, Emad; Samari, Majid; Razavi, Seyed mohammad reza. (2018) Stress analysis on a non-flat zigzag interface bonded joint. The journal of adhesion
  Academic article
• Song, Wei; Liu, Xuesong; Berto, Filippo; Razavi, Nima. (2018) Low-cycle fatigue behavior of 10CrNi3MoV high strength steel and its undermatched welds. Materials
  Academic article
• Song, Wei; Liu, Xuesong; Berto, Filippo; Razavi, Nima. (2018) Energy-based low cycle fatigue indicator prediction of non-load-carrying cruciform welded joints. Theoretical and Applied Fracture Mechanics
  Academic article
• Branco, Ricardo; Costa, J.D.M.; Berto, Filippo; Razavi, Nima; Ferreira, J.A.M.; Capela, C.. (2018) Low-cycle fatigue behaviour of AISI 18Ni300 maraging steel produced by selective laser melting. Metals
  Academic article
• Razavi, Nima; Berto, Filippo; Peron, Mirco; Torgersen, Jan. (2018) Parametric study of adhesive joints with non-flat sinusoid interfaces. Theoretical and Applied Fracture Mechanics
  Academic article
• Esmaeili, Emad; Razavi, Nima; Bayat, Mohammad; Berto, Filippo. (2018) Flexural behavior of metallic fiber-reinforced adhesively bonded single lap joints. The journal of adhesion
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Amozadi, Atefeh; Berto, Filippo. (2018) Effects of different indentation methods on fatigue life extension of cracked specimens. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Razavi, Nima; Ayatollahi, Majid Reza; Majidi, Hamid Reza; Berto, Filippo. (2018) A strain-based criterion for failure load prediction of steel/CFRP double strap joints. Composite structures
  Academic article
• Torabi, AR; Berto, Filippo; Razavi, Nima. (2018) Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes. Theoretical and Applied Fracture Mechanics
  Academic article
• Majidi, Hamid Reza; Razavi, Nima; Torabi, Ali reza. (2018) Application of EMC-J criterion to fracture prediction of U-notched polymeric specimens with nonlinear behaviour. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Razavi, Nima; Aliha, Mohammad Reza Mohammad; Berto, Filippo. (2018) Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens. Theoretical and Applied Fracture Mechanics
  Academic article
• Razavi, Nima; Berto, Filippo. (2018) Fatigue strength of notched specimens made of Ti-6Al-4V produced by Selected Laser Melting technique. Procedia Structural Integrity
  Academic article
• Razavi, Nima; Ferro, P; Berto, Filippo; Torgersen, Jan. (2018) Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V. Theoretical and Applied Fracture Mechanics
  Academic article
• Song, Wei; Liu, Xuesong; Razavi, Nima. (2018) Fatigue assessment of steel load-carrying cruciform welded joints by means of local approaches. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article

2017

• Ferro, P; Peron, Mirco; Razavi, Nima; Berto, Filippo; Torgersen, Jan. (2017) The fatigue behavior of V-notches in presence of residual stresses: Recent developments and future outcomes. Frattura ed Integrità Strutturale
  Academic literature review
• Peron, Mirco; Razavi, Nima; Berto, Filippo; Torgersen, Jan. (2017) Notch stress intensity factors under mixed mode loadings: An overview of recent advanced methods for rapid calculation. Frattura ed Integrità Strutturale
  Academic literature review
• Campagnolo, A; Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2017) Mode II brittle fracture: Recent developments. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Ferro, Paolo; Berto, Filippo. (2017) Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting. Metals
  Academic article
• Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2017) Static multiaxial fracture behavior of graphite components: A review of recent results. Key Engineering Materials
  Academic article
• Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2017) The effect of interface geometry on the mechanical behavior of adhesive joints. Key Engineering Materials
  Academic article
• Peron, Mirco; Razavi, Nima; Berto, Filippo; Torgersen, Jan; Marsavina, L. (2017) Local strain energy density for the fracture assessment of polyurethane specimens weakened by notches of different shape. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Berto, Filippo. (2017) Experimental investigation of metallic fiber-reinforced adhesively bonded joints under bending. Key Engineering Materials
  Academic article
• Peron, Mirco; Razavi, Nima; Berto, Filippo; Torgersen, Jan; Mutignani, F. (2017) Local strain energy density for the fatigue assessment of hot dip galvanized welded joints: Some recent outcomes. Frattura ed Integrità Strutturale
  Academic article
• Peron, Mirco; Razavi, Nima; Berto, Filippo; Torgersen, Jan; Colussi, M. (2017) Fracture assessment of magnetostrictive materials. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Peron, Mirco; Mutignani, F; Torgersen, Jan; Berto, Filippo. (2017) Fatigue strength of hot-dip galvanized welded steel connections. Key Engineering Materials
  Academic article
• Razavi, Nima; Peron, Mirco; Mutignani, F; Torgersen, Jan; Berto, Filippo. (2017) A study on the fatigue behavior of hot dip galvanized steel connections. Key Engineering Materials
  Academic article
• Moghaddam, M Rashidi; Ayatollahi, MR; Razavi, Nima; Berto, Filippo. (2017) Mode II brittle fracture assessment using an energy based criterion. Physical Mesomechanics
  Academic article
• Gallo, P.; Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) Non-localized creep assessment of V-notched components: A review. Procedia Structural Integrity
  Academic article
• Campagnolo, A.; Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) Some recent criteria for brittle fracture prediction under in-plane shear loading. Procedia Structural Integrity
  Academic article
• Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) Multiaxial fracture of graphite components: A review of recent results. Procedia Structural Integrity
  Academic article
• Ferro, P.; Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) The effect of residual stress on fatigue behavior of V-notched components: A review. Procedia Structural Integrity
  Academic article
• Colussi, M.; Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) Experimental and numerical investigations of fracture behavior of magnetostrictive materials. Procedia Structural Integrity
  Academic article
• Ayatollahi, Majid reza; giv, Ali Nemati; Razavi, Nima; Khoramishad, Hadi. (2017) Mechanical properties of adhesively single lap-bonded joints reinforced with multi-‌‌‌walled carbon nanotubes and silica nanoparticles. The journal of adhesion
  Academic article
• Ayatollahi, Majid reza; Samari, Majid; Razavi, Nima; silva, Lucas f. m. Da. (2017) Fatigue performance of adhesively bonded single lap joints with non‐flat sinusoid interfaces. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Sommitsch, Christof; Moser, Christian. (2017) Retardation of fatigue crack growth in high strength steel S690 using a modified stop-hole technique. Engineering Fracture Mechanics
  Academic article
• Razavi, Nima; Ayatollahi, Majid reza; Esmaeili, Emad; silva, Lucas f. m. Da. (2017) Mixed-mode fracture response of metallic fiber-reinforced epoxy adhesive. European Journal of Mechanics. A, Solids
  Academic article
• Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2017) Notched graphite under multiaxial loading. Frattura ed Integrità Strutturale
  Academic article
• Aliha, MRM; Berto, Filippo; Mousavi, A.; Razavi, Nima Javad. (2017) On the applicability of ASED criterion for predicting mixed mode I+II fracture toughness results of a rock material. Theoretical and Applied Fracture Mechanics
  Academic article
• Chebat, F; Cincera, M; Razavi, Nima; Berto, Filippo; Welo, Torgeir. (2017) Fatigue assessment of steel rollers by means of the local energy. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo; Welo, Torgeir. (2017) 40CrMoV13.9 notched specimens under multiaxial fatigue: An overview of recent results. Frattura ed Integrità Strutturale
  Academic article
• Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo; Mutignani, F. (2017) Effect of hot dip galvanization on the fatigue strength of steel bolted connections. Frattura ed Integrità Strutturale
  Academic article
• Gallo, P; Razavi, Nima; Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2017) Creep behavior of v-notched components. Frattura ed Integrità Strutturale
  Academic article
• Berto, Filippo; Marsavina, L.; Razavi, Nima; Ayatollahi, M.R.. (2017) On the fracture behavior of polyurethane notched components. Procedia Structural Integrity
  Academic article
• Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.. (2017) Fatigue behaviour of notched specimens made of 40CrMoV13.9 under multiaxial loading. Procedia Structural Integrity
  Academic article
• Berto, Filippo; Razavi, Nima; Ayatollahi, M.R.; Mutignani, F.. (2017) Mechanical behavior of hot-dip galvanized welded steel under cyclic loading. Procedia Structural Integrity
  Academic article
• Razavi, Nima Javad; Ferro, Paolo; Berto, Filippo. (2017) RETRACTED ARTICLE: Fatigue assessment of Ti-6Al-4V circular notched specimens produced by selective laser melting. Strength of Materials
  Errata
• Majidi, Hamid Reza; Razavi, Nima; Berto, Filippo. (2017) Failure assessment of steel/CFRP double strap joints. Metals
  Academic article
• Dadlani, Anup; Acharya, Shinjita; Trejo, Orlando; Nordlund, Dennis; Peron, Mirco; Razavi, Nima Javad. (2017) Revealing the Bonding Environment of Zn in ALD Zn(O,S) Buffer Layers through X-ray Absorption Spectroscopy. ACS Applied Materials & Interfaces
  Academic article
• Peron, Mirco; Razavi, Nima Javad; Torgersen, Jan; Berto, Filippo. (2017) Fracture assessment of PEEK under static loading by means of the local strain energy density. Materials
  Academic article

2016

• Ayatollahi, Majid reza; Razavi, Nima; Sommitsch, Christof; Moser, Christian. (2016) Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique. Materials Science Forum
  Academic article
• Ayatollahi, Majid reza; moghaddam, Morteza Rashidi; Razavi, Nima; Berto, Filippo. (2016) Geometry effects on fracture trajectory of PMMA samples under pure mode-I loading. Engineering Fracture Mechanics
  Academic article

2015

• Ayatollahi, Majid reza; Razavi, Nima; Yahya, Mohd Yazid. (2015) Mixed mode fatigue crack initiation and growth in a CT specimen repaired by stop hole technique. Engineering Fracture Mechanics
  Academic article
• Ayatollahi, Majid reza; Razavi, Nima; moghaddam, Morteza Rashidi; Berto, Filippo. (2015) Mode I Fracture Analysis of Polymethylmetacrylate Using Modified Energy-Based Models. Physical Mesomechanics
  Academic article

2014

• Ayatollahi, Majid reza; Razavi, Nima; Chamani, Hamid reza. (2014) A numerical study on the effect of symmetric crack flank holes on fatigue life extension of a SENT specimen. Fatigue & Fracture of Engineering Materials & Structures (FFEMS)
  Academic article
• Khoramishad, Hadi; Razavi, Nima. (2014) Metallic fiber-reinforced adhesively bonded joints. International Journal of Adhesion and Adhesives
  Academic article
• Ayatollahi, Majid reza; Razavi, Nima; Chamani, Hamid reza. (2014) Fatigue Life Extension by Crack Repair Using Stop-hole Technique under Pure Mode-I and Pure mode-II Loading Conditions. Procedia Engineering
  Academic article

2013

• Razavi, Seyed mohammad reza; Razavi, Nima; Miri, Taghi; Shirazian, Saeed. (2013) CFD simulation of CO2 capture from gas mixtures in nanoporous membranes by solution of 2-amino-2-methyl-1-propanol and piperazine. International Journal of Greenhouse Gas Control
  Academic article