Course - Fundamentals Of Machine Component Design - MASA2022
MASA2022 - Fundamentals Of Machine Component Design
About
Examination arrangement
Examination arrangement: School exam
Grade: Letter grades
Evaluation | Weighting | Duration | Grade deviation | Examination aids |
---|---|---|---|---|
School exam | 100/100 | 4 hours | C |
Course content
Dimensioning of different machine components such as shafts, couplings, bolts, gears, welding joints Rules for technical drawings
Learning outcome
Knowledge: The candidate - has knowledge of the most common machine components. -have knowledge of the design of machine constructions based on the above. -have knowledge of environmental and social consequences of mechanical constructions. -knows regulations that deal with simple dimensioning based on standardized procedures / regulations. - has knowledge of simple digital tools used for design and dimensioning.
Skills: The candidate - can find the necessary regulations that deal with dimensioning and construction. -can perform estimate calculations and dimensioning on mechanical components based on regulations. -can draw mechanical constructions according to standard machine drawing (NS). -can use computer technology tools for 2D machine drawing.
General competence: The candidate - can plan and carry out dimensioning and design of simple mechanical systems. can, by means of standards and relevant regulations, document and disseminate written technical reports that deal with mechanical individual components or simple mechanisms. -Can select materials and design mechanical components in terms of strength, function and component life cycle.
Learning methods and activities
Teaching methods: Lectures and individual- and group-exercises (mandatory). Mandatory assignments: Mandatory assignments have to be approved within defined time limits before admission to examination.The semester project work is mandatory.
Compulsory assignments
- Mandatory assignment
Further on evaluation
Permitted aids for written school exams: Tekniske tabeller Verkstedhåndboka, Calculator
Resit exam: Oral
Specific conditions
Compulsory activities from previous semester may be approved by the department.
Admission to a programme of study is required:
Mechanical Engineering (BIMASKIN)
Recommended previous knowledge
Mechanics and physics.
Course materials
Will be announced at the start of the semester.
No
Version: 1
Credits:
7.5 SP
Study level: Intermediate course, level II
Term no.: 1
Teaching semester: SPRING 2023
Language of instruction: Norwegian
Location: Ålesund
- Engineering
Department with academic responsibility
Department of Ocean Operations and Civil Engineering
Examination
Examination arrangement: School exam
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Spring ORD School exam 100/100 C
-
Room Building Number of candidates
Examination arrangement: Oral examination
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Summer UTS Oral examination 100/100
-
Room Building Number of candidates
- * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
For more information regarding registration for examination and examination procedures, see "Innsida - Exams"