Course - Geomechanics and Flow in Porous Media - TPG4112
TPG4112 - Geomechanics and Flow in Porous Media
About
Examination arrangement
Examination arrangement: Written examination
Grade: Letters
| Evaluation | Weighting | Duration | Grade deviation | Examination aids |
|---|---|---|---|---|
| Written examination | 100/100 | 4 timer |
Course content
The course consists of two parts, one flow part (50%) and one rock mechanics part (50%). The flow part deals with porous media characteristics: Porosity, permeability, flow equations for single- and multi-phase flow, capillary pressure, relative permeability and applications in earth sciences and petroleum engineering. The rock mechanic part deals with tensions and pore pressure in the earth crusts, tectonic tensions, normal and abnormal pore pressures, tension determination, rock mechanic field- and laboratory experiments, mechanical properties of rocks, tensions close to wells and subsurface holes. Other topics are: Stability of wells during drilling, sand-/particle production, hydraulic fracturing, reservoir compaction and surface setting, significance of rock mechanics in reservoir control and use of rock mechanics in relation to rock installations.
Learning outcome
Ingress:
The subject should give basic knowledge about flow in porous media related to reservoir engineering and hydrogeological applications, and basic understanding of geomechanics and its importance in mining operations, tunnel contructions and exploitation of petroleum resources.
Knowledge:
From the part of the course presenting flow in porous media the students should understand all important rock- and fluid parameters in a reservoir and their significance for the fluid distribution and fluid flow in porous media. From the land based geomechanics part of the course the students should understand stability of tunnels, subsurface holes and wells. From the petroleum geomechanics part of the course the students should obtain :
- Understanding of tension and pore pressure in the earth crust.
- Basic understanding of poro elasticity theory, the priciple of effecive tension, and fracturing mechanisms in rocks.
- Knowledge of the most important geomechanical parameters and how these can be determined from measurements in the laboratory and in the field.
Skills:
From the flow in porous media part of the course the students should be capable of performing simple calculations of fluid distribution and fluid transport in porous media. From the geomechanics part of the course the students should be able to apply geomechanics to perform simple calculations related to installations in rocks and to petroleum exploitation.
Learning methods and activities
Lectures and exercises. If there is a re-sit examination, the form of assessment may be changed from written to oral examination.
Compulsory assignments
- Exercises
Recommended previous knowledge
None.
Course materials
A.B. Zolotukhin and Jann-Rune Ursin: "Introduction to Petroleum Reservoir Engineering", Høgskoleforlaget, 2000. Distributed lecture notes.
Version: 1
Credits:
7.5 SP
Study level: Intermediate course, level II
Term no.: 1
Teaching semester: SPRING 2016
Language of instruction: Norwegian
-
- Rock Mechanics
- Geology
- Petroleum Engineering
- Reservoir Engineering
Examination
Examination arrangement: Written examination
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Spring ORD Written examination 100/100 2016-06-09 09:00
-
Room Building Number of candidates
Examination arrangement: Oral examination
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Summer KONT Oral examination 100/100 2016-08-12
-
Room Building Number of candidates
- * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
For more information regarding registration for examination and examination procedures, see "Innsida - Exams"