Christer Westum Elverum
+4792840643
Verkstedteknisk, 282, Gløshaugen
Publications
2024
-
Nesheim, Ole Skråmestø;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2024)
In-field 3D printing of form-fitted generatively designed components—a case study on paralympic sit-ski equipment.
Frontiers in Mechanical Engineering
Academic article
-
Peckham, Owen;
Elverum, Christer Westum;
Hicks, Ben;
Goudswaard, Mark;
Snider, Chris;
Steinert, Martin.
(2024)
Investigating and Characterizing the Systemic Variability When Using Generative Design for Additive Manufacturing.
Applied Sciences
Academic article
-
Cao, Anni;
Wan, Di;
Gao, Chao;
Elverum, Christer Westum.
(2024)
A novel method of fabricating designable polylactic acid (PLA)/thermoplastic polyurethane (TPU) composite filaments and structures by material extrusion additive manufacturing.
Journal of Manufacturing Processes
Academic article
2023
-
Amlie, Erik Mathias;
Fylling, Emil Karlsen;
Eikevåg, Sindre Wold;
Nesheim, Ole Skråmestø;
Steinert, Martin;
Elverum, Christer Westum.
(2023)
SENSING IN-SITU TEMPERATURES BY COORDINATES IN FUSED FILAMENT FABRICATION FOR IDENTIFYING INTERLAYER ANISOTROPIC MECHANICAL PROPERTIES AND ENABLING POST-FEM ANALYSIS.
Proceedings of the Design Society
Academic article
-
Øvrebø, Henrik;
Koldre, Svein-Andre;
Nesheim, Ole Skråmestø;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2023)
CREATING AN OPEN-SOURCE, LOW-COST COMPOSITE FEEDER DESIGN TO IMPROVE FILAMENT QUALITY OF HIGH-PERFORMANCE MATERIALS TO BE USED IN FUSED FILAMENT FABRICATION (FFF).
Proceedings of the Design Society
Academic article
-
Ødegaard, Kristin Sirnes;
Westhrin, Marita;
Bin Afif, Abdulla Shaikh Abdul Qader;
Ma, Qianli;
Mela, Petra;
Standal, Therese.
(2023)
The effects of surface treatments on electron beam melted Ti-6Al-4V disks on osteogenesis of human mesenchymal stromal cells.
Biomaterials Advances
Academic article
2022
-
Birkelid, Andreas Hagerup;
Eikevåg, Sindre Wold;
Elverum, Christer Westum;
Steinert, Martin.
(2022)
High-performance polymer 3D printing – Open-source liquid cooled scalable printer design.
HardwareX
Academic article
-
Bjørken, Olav Urvold;
Andresen, Benjamin;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2022)
Thermal Layer Design in Fused Filament Fabrication.
Applied Sciences
Academic article
2021
-
Ødegaard, Kristin Sirnes;
Ouyang, Lingzi;
Ma, Qianli;
Buene, Glenn;
Wan, Di;
Elverum, Christer Westum.
(2021)
Revealing the influence of electron beam melted Ti-6Al-4V scaffolds on osteogenesis of human bone marrow-derived mesenchymal stromal cells.
Journal of Materials Science: Materials in Medicine
Academic article
2020
-
Wang, Shaoquan;
Lasn, Kaspar;
Elverum, Christer Westum;
Wan, Di;
Echtermeyer, Andreas.
(2020)
Novel in-situ residual strain measurements in additive manufacturing specimens by using the Optical Backscatter Reflectometry.
Additive Manufacturing
Academic article
-
Ødegaard, Kristin Sirnes;
Torgersen, Jan;
Elverum, Christer Westum.
(2020)
Structural and Biomedical Properties of Common Additively Manufactured Biomaterials: A Concise Review.
Metals
Academic literature review
-
Blindheim, Jørgen;
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2020)
Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling.
Journal of Engineering, Design and Technology
Academic article
2019
-
Tronvoll, Sigmund Arntsønn;
Vedvik, Nils Petter;
Elverum, Christer Westum;
Welo, Torgeir.
(2019)
A new method for assessing anisotropy in fused deposition modeled parts using computed tomography data.
The International Journal of Advanced Manufacturing Technology
Academic article
-
Trinh, Yen Mai Thi;
Elverum, Christer Westum.
(2019)
The effects of representation mode on conceptual coherence in the design of physical products.
Proceedings of the International Conference on Engineering Design
Academic article
-
Tronvoll, Sigmund Arntsønn;
Popp, Sebastian;
Elverum, Christer Westum;
Welo, Torgeir.
(2019)
Investigating pressure advance algorithms for filament-based melt extrusion additive manufacturing: theory, practice and simulations.
Rapid prototyping journal
Academic article
2018
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2018)
Dimensional accuracy of threads manufactured by fused deposition modeling.
Procedia Manufacturing
Academic article
-
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir;
Elverum, Christer Westum.
(2018)
The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach.
The International Journal of Advanced Manufacturing Technology
Academic article
2017
-
Jensen, Matilde Bisballe;
Elverum, Christer Westum;
Steinert, Martin.
(2017)
Eliciting unknown unknowns with prototypes: Introducing prototrials and prototrial-driven cultures.
Design Studies
Academic article
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2017)
Prototype Experiments: Strategies and Trade-offs.
Procedia CIRP
Academic article
2016
-
Elverum, Christer Westum;
Welo, Torgeir;
Tronvoll, Sigmund Arntsønn.
(2016)
Prototyping in new product development: Strategy considerations.
Procedia CIRP
Academic article
-
Elverum, Christer Westum;
Welo, Torgeir.
(2016)
Leveraging prototypes to generate value in the concept-to-production process: a qualitative study of the automotive industry.
International Journal of Production Research
Academic article
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2016)
Test Environments in Engineering Design: A conceptual study.
The Design Society
Academic chapter/article/Conference paper
2015
-
Elverum, Christer Westum;
Welo, Torgeir.
(2015)
On the use of directional and incremental prototyping in the development of high novelty products: Two case studies in the automotive industry.
Journal of engineering and technology management
Academic article
-
Elverum, Christer Westum;
Dalsgaard, Henrik Vagle;
Welo, Torgeir.
(2015)
Continuous improvement of technical systems using Design for X.
IEEE conference proceedings
Academic chapter/article/Conference paper
2014
-
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2014)
The Fuzzy Front End: Concept Development in the Automotive Industry.
The American Society of Mechanical Engineers (ASME)
Academic chapter/article/Conference paper
-
Elverum, Christer Westum;
Welo, Torgeir.
(2014)
The role of early prototypes in concept development: insights from the automotive industry.
Procedia CIRP
Academic article
2013
-
Elverum, Christer Westum;
Welo, Torgeir.
(2013)
Towards a Context-Driven Front End in New Product Development.
Springer
Academic chapter/article/Conference paper
2011
-
Welo, Torgeir;
Granly, Bjørg Margrethe;
Elverum, Christer Westum;
Søvik, Odd Perry;
Sørbø, Steinar.
(2011)
Springback Control in Industrial Bending Operations: Assessing the Accuracy of Three Commercial FEA Codes.
AIP Conference Proceedings
Academic article
Journal publications
-
Nesheim, Ole Skråmestø;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2024)
In-field 3D printing of form-fitted generatively designed components—a case study on paralympic sit-ski equipment.
Frontiers in Mechanical Engineering
Academic article
-
Peckham, Owen;
Elverum, Christer Westum;
Hicks, Ben;
Goudswaard, Mark;
Snider, Chris;
Steinert, Martin.
(2024)
Investigating and Characterizing the Systemic Variability When Using Generative Design for Additive Manufacturing.
Applied Sciences
Academic article
-
Cao, Anni;
Wan, Di;
Gao, Chao;
Elverum, Christer Westum.
(2024)
A novel method of fabricating designable polylactic acid (PLA)/thermoplastic polyurethane (TPU) composite filaments and structures by material extrusion additive manufacturing.
Journal of Manufacturing Processes
Academic article
-
Amlie, Erik Mathias;
Fylling, Emil Karlsen;
Eikevåg, Sindre Wold;
Nesheim, Ole Skråmestø;
Steinert, Martin;
Elverum, Christer Westum.
(2023)
SENSING IN-SITU TEMPERATURES BY COORDINATES IN FUSED FILAMENT FABRICATION FOR IDENTIFYING INTERLAYER ANISOTROPIC MECHANICAL PROPERTIES AND ENABLING POST-FEM ANALYSIS.
Proceedings of the Design Society
Academic article
-
Øvrebø, Henrik;
Koldre, Svein-Andre;
Nesheim, Ole Skråmestø;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2023)
CREATING AN OPEN-SOURCE, LOW-COST COMPOSITE FEEDER DESIGN TO IMPROVE FILAMENT QUALITY OF HIGH-PERFORMANCE MATERIALS TO BE USED IN FUSED FILAMENT FABRICATION (FFF).
Proceedings of the Design Society
Academic article
-
Ødegaard, Kristin Sirnes;
Westhrin, Marita;
Bin Afif, Abdulla Shaikh Abdul Qader;
Ma, Qianli;
Mela, Petra;
Standal, Therese.
(2023)
The effects of surface treatments on electron beam melted Ti-6Al-4V disks on osteogenesis of human mesenchymal stromal cells.
Biomaterials Advances
Academic article
-
Birkelid, Andreas Hagerup;
Eikevåg, Sindre Wold;
Elverum, Christer Westum;
Steinert, Martin.
(2022)
High-performance polymer 3D printing – Open-source liquid cooled scalable printer design.
HardwareX
Academic article
-
Bjørken, Olav Urvold;
Andresen, Benjamin;
Eikevåg, Sindre Wold;
Steinert, Martin;
Elverum, Christer Westum.
(2022)
Thermal Layer Design in Fused Filament Fabrication.
Applied Sciences
Academic article
-
Ødegaard, Kristin Sirnes;
Ouyang, Lingzi;
Ma, Qianli;
Buene, Glenn;
Wan, Di;
Elverum, Christer Westum.
(2021)
Revealing the influence of electron beam melted Ti-6Al-4V scaffolds on osteogenesis of human bone marrow-derived mesenchymal stromal cells.
Journal of Materials Science: Materials in Medicine
Academic article
-
Wang, Shaoquan;
Lasn, Kaspar;
Elverum, Christer Westum;
Wan, Di;
Echtermeyer, Andreas.
(2020)
Novel in-situ residual strain measurements in additive manufacturing specimens by using the Optical Backscatter Reflectometry.
Additive Manufacturing
Academic article
-
Ødegaard, Kristin Sirnes;
Torgersen, Jan;
Elverum, Christer Westum.
(2020)
Structural and Biomedical Properties of Common Additively Manufactured Biomaterials: A Concise Review.
Metals
Academic literature review
-
Blindheim, Jørgen;
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2020)
Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling.
Journal of Engineering, Design and Technology
Academic article
-
Tronvoll, Sigmund Arntsønn;
Vedvik, Nils Petter;
Elverum, Christer Westum;
Welo, Torgeir.
(2019)
A new method for assessing anisotropy in fused deposition modeled parts using computed tomography data.
The International Journal of Advanced Manufacturing Technology
Academic article
-
Trinh, Yen Mai Thi;
Elverum, Christer Westum.
(2019)
The effects of representation mode on conceptual coherence in the design of physical products.
Proceedings of the International Conference on Engineering Design
Academic article
-
Tronvoll, Sigmund Arntsønn;
Popp, Sebastian;
Elverum, Christer Westum;
Welo, Torgeir.
(2019)
Investigating pressure advance algorithms for filament-based melt extrusion additive manufacturing: theory, practice and simulations.
Rapid prototyping journal
Academic article
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2018)
Dimensional accuracy of threads manufactured by fused deposition modeling.
Procedia Manufacturing
Academic article
-
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir;
Elverum, Christer Westum.
(2018)
The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach.
The International Journal of Advanced Manufacturing Technology
Academic article
-
Jensen, Matilde Bisballe;
Elverum, Christer Westum;
Steinert, Martin.
(2017)
Eliciting unknown unknowns with prototypes: Introducing prototrials and prototrial-driven cultures.
Design Studies
Academic article
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2017)
Prototype Experiments: Strategies and Trade-offs.
Procedia CIRP
Academic article
-
Elverum, Christer Westum;
Welo, Torgeir;
Tronvoll, Sigmund Arntsønn.
(2016)
Prototyping in new product development: Strategy considerations.
Procedia CIRP
Academic article
-
Elverum, Christer Westum;
Welo, Torgeir.
(2016)
Leveraging prototypes to generate value in the concept-to-production process: a qualitative study of the automotive industry.
International Journal of Production Research
Academic article
-
Elverum, Christer Westum;
Welo, Torgeir.
(2015)
On the use of directional and incremental prototyping in the development of high novelty products: Two case studies in the automotive industry.
Journal of engineering and technology management
Academic article
-
Elverum, Christer Westum;
Welo, Torgeir.
(2014)
The role of early prototypes in concept development: insights from the automotive industry.
Procedia CIRP
Academic article
-
Welo, Torgeir;
Granly, Bjørg Margrethe;
Elverum, Christer Westum;
Søvik, Odd Perry;
Sørbø, Steinar.
(2011)
Springback Control in Industrial Bending Operations: Assessing the Accuracy of Three Commercial FEA Codes.
AIP Conference Proceedings
Academic article
Part of book/report
-
Tronvoll, Sigmund Arntsønn;
Elverum, Christer Westum;
Welo, Torgeir.
(2016)
Test Environments in Engineering Design: A conceptual study.
The Design Society
Academic chapter/article/Conference paper
-
Elverum, Christer Westum;
Dalsgaard, Henrik Vagle;
Welo, Torgeir.
(2015)
Continuous improvement of technical systems using Design for X.
IEEE conference proceedings
Academic chapter/article/Conference paper
-
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2014)
The Fuzzy Front End: Concept Development in the Automotive Industry.
The American Society of Mechanical Engineers (ASME)
Academic chapter/article/Conference paper
-
Elverum, Christer Westum;
Welo, Torgeir.
(2013)
Towards a Context-Driven Front End in New Product Development.
Springer
Academic chapter/article/Conference paper
Teaching
Courses
- TMM4128 - Machine Learning for Engineers
- TMM4960 - Engineering Design and Materials, Master's Thesis
- MM8101 - Engineering Design Research and Scientific Methods/Tools
- TMM4561 - Engineering Design and Materials, Specialization Project
- TMM4121 - Engineering Design
- TMM4540 - Industrial ICT Engineering Design and Materials, Specialization Project
- TMM4560 - Engineering Design and Materials, Specialization Project
- TMM4280 - Advanced Product Development
- TMM4935 - Industrial ICT, Master's Thesis
Knowledge Transfer
2024
-
Academic lectureNesheim, Ole Skråmestø; Steffensen, Torjus Lines; Steinert, Martin; Elverum, Christer Westum. (2024) 3D Printing Gelatin Ultrasound Phantoms: Observations, Challenges and Future Research. Design Society Nord Design 2024 , Reykjavik, Island 2024-08-12 - 2024-08-14
2023
-
Academic lectureAmlie, Erik Mathias; Fylling, Emil Karlsen; Eikevåg, Sindre Wold; Nesheim, Ole Skråmestø; Steinert, Martin; Elverum, Christer Westum. (2023) SENSING IN-SITU TEMPERATURES BY COORDINATES IN FUSED FILAMENT FABRICATION FOR IDENTIFYING INTERLAYER ANISOTROPIC MECHANICAL PROPERTIES AND ENABLING POST-FEM ANALYSIS. Design Society ICED23: The 24th International Conference on Engineering Design , Bordeaux, Frankrike 2023-07-24 - 2023-07-28
2019
-
Academic lectureWang, Shaoquan; Lasn, Kaspar; Elverum, Christer Westum; Echtermeyer, Andreas. (2019) A novel in-situ characterization method for 3D printing. NTNU, SINTEFF 56th Nordic Polymer Days , Trondheim 2019-06-05 - 2019-06-07
2016
-
Academic lectureElverum, Christer Westum; Welo, Torgeir; Tronvoll, Sigmund Arntsønn. (2016) Prototyping in New Product Development: Strategy Considerations. 26th CIRP Design Conference 2016-06-15 - 2016-06-17
-
Academic lectureTronvoll, Sigmund Arntsønn; Elverum, Christer Westum; Welo, Torgeir. (2016) Test Environments in Engineering Design: A conceptual study. NTNU - Institutt for produktutvikling og materialer NordDesign 2016 , Trondheim 2016-08-10 - 2016-08-12
2015
-
Academic lectureElverum, Christer Westum; Welo, Torgeir; Dalsgaard, Henrik Vagle. (2015) Continuous improvement of technical systems using Design for X. 10th Annual System of Systems Engineering Conference , San Antonio, TX 2015-05-17 - 2015-05-20
2014
-
Academic lectureElverum, Christer Westum; Welo, Torgeir. (2014) The role of early prototypes in concept development: insights from the automotive industry. The 24th CIRP Design Conference 2014: Mass Customization and Personalization 2014-04-14 - 2014-04-16
-
Academic lectureElverum, Christer Westum; Welo, Torgeir; Steinert, Martin. (2014) THE FUZZY FRONT END: CONCEPT DEVELOPMENT IN THE AUTOMOTIVE INDUSTRY. ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2014 , Buffalo, New York 2014-08-17 - 2014-08-20
2013
-
Academic lectureElverum, Christer Westum; Welo, Torgeir; Steinert, Martin. (2013) Early concept development in the automotive industry: challenges related to the creation and implementation of viable solutions. R&D Management Journal R&D Management Conference 2013 , Manchester 2013-06-26 - 2013-06-28
-
Academic lectureElverum, Christer Westum; Welo, Torgeir. (2013) Towards a Context-Driven Front End in New Product Development. 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013 , Bochum, Germany 2013-03-11 - 2013-03-13
2011
-
Academic lectureWelo, Torgeir; Granly, Bjørg Margrethe; Elverum, Christer Westum; Søvik, Odd P.; Sørbø, Steinar. (2011) Springback Control in Industrial Bending Operations: Assessing the Accuracy of Three Commercial FEA Codes. Esaform Esafor 2011 , Belfast 2011-04-27 - 2011-04-29