Martin Steinert
About
Research interests
Teaching
- TMM 4220 - CoTeacher with Prof. Lozano, Innovation by Design Thinking (7th semester)
- TMM 4245 - Fuzzy Front End Engineering (8th semester)
- TMM 4280 - CoTeacher with Prof. Welo, Advanced Product Developement (9th semester)
- TMM 4560 - Engineering Design and Materials, Specialization Project (9th semester)
- TMM 4901 - Engineering Design, Calculation and Manufacture, Master's Thesis (10th semester)
- MM 8101 - Engineering Design Methodology (PhD seminar, fall)
specials/prototypes, when availble
- CERN - Challenge Based Innovation CBI, 6 month course with and at CERN (2 NTNU teams, jointly IPM/Steinert and IPD/Boks)
- Stanford University - ME310, 9 month course with and at Stanford (1 NTNU/IPM team, challenge sponsored by Renault/Nissan)
Short CV, Martin Steinert, Ph.D.
I am Professor of Eng. Design and Innovation at the Department of Eng. Design and Materials at the Norwegian University of Science and Technology (NTNU). I teach fuzzy front-end engineering for radical new product/service/system concepts and graduate research seminars for PhDs engaged in topics related to new product design and development. My various research projects are usually multidisciplinary (ME/CS/EE/Neuro- and Cognitive Sc.) and often connected with industry. The aim is to uncover, understand and leverage early stage engineering design paradigms with a special focus onto human-machine/object interactions. Recently I have published in Int. Journal of Product Development, Int. Journal of Design Creativity and Innovation, Journal of Eng. Design and Technology, Int. Journal of Design, Int. Journal of Eng. Education, Tech. Forecasting and Social Change, Energy Policy, Information Knowledge System Management Journal … Ever since a short stint at MIT and my time as Deputy Director at the Center for Design Research and at the d.research program (Hasso Plattner Design Thinking Research program) at Stanford University, the overarching aim of my research and teaching is to always push the boundaries for Norwegian product development teams, so that they will ideate, more radical new concepts, faster.
more info
- for full paper overview and access: https://www.researchgate.net/profile/Martin_Steinert
- for TrollLABS site: http://www.trolllabs.com/
- more: https://www.facebook.com/TrollLaboratories
Publications
2021
-
Dybvik, Henrikke;
Erichsen, Christian Nicolai Kuster;
Steinert, Ralf Martin.
(2021)
Demonstrating the Feasibility of Multimodal Neuroimaging Data Capture with a Wearable Electoencephalography + Functional Near-Infrared Spectroscopy (EEG+FNIRS) in Situ.
Proceedings of the Design Society.
volum 1.
Academic article
-
Dybvik, Henrikke;
Erichsen, Christian Nicolai Kuster;
Steinert, Ralf Martin.
(2021)
Description of a Wearable Electroencephalography + Functional Near-Infrared Spectroscopy (EEG+FNIRS) for In-Situ Experiments on Design Cognition.
Proceedings of the Design Society.
volum 1.
Academic article
-
Dybvik, Henrikke;
Steinert, Martin.
(2021)
Real-World fNIRS Brain Activity Measurements during Ashtanga Vinyasa Yoga.
Brain Sciences.
volum 11 (6).
Academic article
-
Ege, Daniel Nygård;
Auflem, Marius;
Lilleløkken, Oscar;
Steinert, Ralf Martin.
(2021)
User involvement in early-stage design of medical training devices – case of a palpation task trainer prototype.
Design for Health.
volum 5 (2).
Academic article
-
Erichsen, Jorgen Falck;
Sjöman, Heikki;
Steinert, Martin;
Welo, Torgeir.
(2021)
Protobooth: Gathering and analyzing data on prototyping in early-stage engineering design projects by digitally capturing physical prototypes.
Artificial intelligence for engineering design, analysis and manufacturing.
volum 35 (1).
Academic article
-
Funch, Oliver Istad;
Marhaug, Robert Nikolai;
Kohtala, Sampsa;
Steinert, Martin.
(2021)
Detecting glass and metal in consumer trash bags during waste collection using convolutional neural networks.
Waste Management.
volum 119.
Academic article
-
Kari, Raheleh;
Steinert, Ralf Martin.
(2021)
Human Factor Issues in Remote Ship Operations: Lesson Learned by Studying Different Domains.
Journal of Marine Science and Engineering.
volum 9 (4).
Academic article
-
Kohtala, Sampsa;
Erichsen, Jorgen Falck;
Wullum, Ole Petter;
Steinert, Martin.
(2021)
Photogrammetry-based 3D scanning for supporting design activities and testing in early stage product development.
Procedia CIRP.
volum 100.
Academic article
-
Kohtala, Sampsa;
Steinert, Martin.
(2021)
Leveraging synthetic data from CAD models for training object detection models – a VR industry application case.
Procedia CIRP.
volum 100.
Academic article
-
Rørvik, Sigurd Bjarne;
Auflem, Marius;
Dybvik, Henrikke;
Steinert, Ralf Martin.
(2021)
Perception by Palpation: Development and Testing of a Haptic Ferrogranular Jamming Surface.
Frontiers in Robotics and AI.
volum 8.
Academic article
-
Severin, Cecilia;
Danielsen, Jørgen;
Erichsen, Jorgen Falck;
Eikevåg, Sindre Wold;
Steinert, Martin;
Ettema, Gertjan;
Baumgart, Julia Kathrin.
(2021)
Case Report: Adjusting Seat and Backrest Angle Improves Performance in an Elite Paralympic Rower.
Frontiers in Sports and Active Living.
volum 3.
Academic article
-
Tyflopoulos, Evangelos;
Haskins, Cecilia;
Steinert, Martin.
(2021)
Topology-Optimization-Based Learning: A Powerful Teaching and Learning Framework under the Prism of the CDIO Approach.
Education Sciences.
volum 11 (7).
Academic article
-
Tyflopoulos, Evangelos;
Hofset, Tarjei Aure;
Olsen, Anna;
Steinert, Martin.
(2021)
Simulation-based design: A case study in combining optimization methodologies for angle-ply composite laminates.
Procedia CIRP.
volum 100.
Academic article
-
Tyflopoulos, Evangelos;
Lien, Mathias;
Steinert, Martin.
(2021)
Optimization of Brake Calipers Using Topology Optimization for Additive Manufacturing.
Applied Sciences.
volum 11 (4).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2021)
Combining Macro- and Mesoscale Optimization: A Case Study of the General Electric Jet Engine Bracket.
Designs.
volum 5 (4).
Academic article
2020
-
Auflem, Marius;
Bøe, Hans Hagenes;
Erichsen, Jørgen Falck;
Steinert, Ralf Martin.
(2020)
ON PROTOTYPING METHODS TO LEVERAGE NON-RIGID MATERIALS IN THE EARLY STAGES OF ENGINEERING DESIGN.
Proceedings of the Design Society: DESIGN Conference.
Academic article
-
Balters, Stephanie;
Geeseman, JW;
Tveten, Ann-Kristin;
Hildre, Hans Petter;
Ju, Wendy;
Steinert, Martin.
(2020)
Mayday, Mayday, Mayday: Using salivary cortisol to detect distress (and eustress!) in critical incident training.
International Journal of Industrial Ergonomics.
volum 78.
Academic article
-
Blindheim, Jørgen;
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2020)
Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling.
Journal of Engineering, Design and Technology.
volum 18 (5).
Academic article
-
Blindheim, Jørgen;
Grong, Øystein;
Welo, Torgeir;
Steinert, Martin.
(2020)
On the mechanical integrity of AA6082 3D structures deposited by hybrid metal extrusion & bonding additive manufacturing.
Journal of Materials Processing Technology.
volum 282.
Academic article
-
Dahle, Yngve Andre;
Nguyen Duc, Anh;
Steinert, Ralf Martin;
Reuther, Kevin.
(2020)
Six Pillars of Modern Entrepreneurial Theory and How to Use Them.
Fundamentals of Software Startups : Essential Engineering and Business Aspects.
Academic chapter/article/Conference paper
-
Dybvik, Henrikke;
Løland, Martin Poverud;
Gerstenberg, Achim;
Slåttsveen, Kristoffer Bjørnerud;
Steinert, Ralf Martin.
(2020)
A low-cost predictive display for teleoperation: Investigating effects on human performance and workload.
International Journal of Human-Computer Studies.
volum 145.
Academic article
-
Dybvik, Henrikke;
Veitch, Erik Aleksander;
Steinert, Martin.
(2020)
Exploring Challenges with Designing and Developing Shore Control Centres (SCCs) for Autonomous Ships.
Proceedings of the Design Society: DESIGN Conference.
volum 1.
Academic article
-
Ege, Daniel Nygård;
Lilleløkken, Oscar;
Auflem, Marius;
Steinert, Ralf Martin.
(2020)
Dealing with Ecological Validity and User Needs when Developing Simulation Based Training Equipment – Case Study of a Medical Palpation Task Trainer.
Procedia CIRP.
volum 91.
Academic article
-
Eikevåg, Sindre Wold;
Kvam, Andris;
Bjølseth, Magnus Kjærnet;
Erichsen, Jorgen Falck;
Steinert, Martin.
(2020)
DESIGNING AN EXPERIMENT FOR EVALUATING SEATING POSITIONS IN PARALYMPIC ROWING.
Proceedings of the Design Society: DESIGN Conference.
volum 1.
Academic article
-
Erichsen, Christian Nicolai Kuster;
Dybvik, Henrikke;
Steinert, Martin.
(2020)
Integration of low-cost, dry-comb EEG-electrodes with a standard electrode cap for multimodal signal acquisition during human experiments.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Hatlem, Leif Arne;
Chen, John;
Dybvik, Henrikke;
Steinert, Ralf Martin.
(2020)
A Modular Research Platform – Proof-of-Concept of a Flexible Experiment Setup Developed for Rapid Testing of Simulators, UIs and Human Physiology Sensors.
Procedia CIRP.
volum 91.
Academic article
-
Heck, Johannes;
Steinert, Martin;
Meboldt, Mirko.
(2020)
Advancing empirical evidence of iteration stereotypes in the fuzzy front end of product development processes.
Procedia CIRP.
volum 91.
Academic article
-
Hjorth, Johan Christian Wigen;
Sjöman, Heikki;
Steinert, Martin.
(2020)
The Crux of Integration Prototyping in Complex Environments.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Jensen, Matilde Bisballe;
Steinert, Martin.
(2020)
User research enabled by makerspaces: bringing functionality to classical experience prototypes.
Artificial intelligence for engineering design, analysis and manufacturing.
volum 34 (3).
Academic article
-
Kohtala, Sampsa Matias Ilmari;
Kaland, Thomas Colin Guo;
Jacobsen, Live;
Aalto, Pasi Olav;
Steinert, Martin.
(2020)
Bringing Reality Back to Virtual Reality - A Collaborative Tool for Multidisciplinary Teams.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Lilleløkken, Oscar;
Ege, Daniel Nygård;
Auflem, Marius;
Steinert, Martin.
(2020)
Proposing a novel approach for testing complex medical task trainer prototypes.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Pitsis, Tyrone S.;
Beckman, SL;
Steinert, Martin;
Oviedo, L;
Maisch, Bettina.
(2020)
Designing the Future: Strategy, Design, and the 4th Industrial Revolution—An Introduction to the Special Issue.
California Management Review.
volum 62 (2).
Academic article
-
Steffensen, Torjus Lines;
Kohtala, Sampsa Matias Ilmari;
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2020)
TrollBOT: A Spontaneous Networking Tool Facilitating Rapid Prototyping of Wirelessly Communicating Products.
Procedia CIRP.
volum 91.
Academic article
-
Toscher, Benjamin;
Dahle, Yngve;
Steinert, Martin.
(2020)
Get Give Make Live: An Empirical Comparative Study of Motivations for Technology, Youth and Arts Entrepreneurship.
Social Enterprise Journal.
volum 16 (2).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2020)
Topology and Parametric Optimization-Based Design Processes for Lightweight Structures.
Applied Sciences.
volum 10 (13).
Academic article
-
Vestad, Håvard Nitter;
Kriesi, Carlo;
Steinert, Ralf Martin.
(2020)
Integrating Carbon Fiber Based Piezoresistive Composites for Flow Characterization in In-vitro Cell Research Equipment.
Procedia CIRP.
volum 91.
Academic article
-
Wulvik, Andreas;
Dybvik, Henrikke;
Steinert, Martin.
(2020)
Investigating the relationship between mental state (workload and affect) and physiology in a control room setting (ship bridge simulator).
Cognition, Technology & Work.
volum 22 (1).
Academic article
2019
-
Auflem, Marius;
Erichsen, Jorgen Falck;
Steinert, Martin.
(2019)
Exemplifying Prototype-Driven Development through Concepts for Medical Training Simulators.
Procedia CIRP.
volum 84.
Academic article
-
Barhoush, Yazan;
Erichsen, Jorgen Falck;
Sjöman, Heikki;
Georgiev, Georgi;
Steinert, Martin.
(2019)
Capturing Prototype Progress in Digital Fabrication Education.
Proceedings of the International Conference on Engineering Design.
volum 1 (1).
Academic article
-
Blindheim, Jørgen;
Steinert, Martin;
Welo, Torgeir.
(2019)
On Solid-State Deposition of Metal Structures - Conceptualization of a New Additive Manufacturing Method based on Hybrid Metal Extrusion & Bonding.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-4094-2.
Doctoral dissertation
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
First demonstration of a new additive manufacturing process based on metal extrusion and solid-state bonding.
The International Journal of Advanced Manufacturing Technology.
volum 105 (5-6).
Academic article
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
Investigating the mechanics of hybrid metal extrusion and bonding additive manufacturing by FEA.
Metals.
volum 9 (8).
Academic article
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
Rapid prototyping and physical modelling in the development of a new additive manufacturing process for aluminium alloys.
Procedia Manufacturing.
volum 34.
Academic article
-
Brede, Jostein Rødseth;
Lafrenz, Thomas;
Krüger, Andreas;
SØVIK, EDMUND;
Steffensen, Torjus Lines;
Kriesi, Carlo;
Steinert, Martin;
Klepstad, Pål.
(2019)
Resuscitative endovascular balloon occlusion of the aorta (REBOA) in non-traumatic out-of-hospital cardiac arrest: Evaluation of an educational programme.
BMJ Open.
volum 9:e027980 (5).
Academic article
-
Dahle, Yngve;
Dybvik, Henrikke;
Steinert, Martin.
(2019)
A dynamic and a static approach to the business model - Investigating the potential difference in business model focus.
2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC).
Academic chapter/article/Conference paper
-
Dahle, Yngve;
Toscher, Benjamin;
Nguyen Duc, Anh;
Steinert, Martin;
Reuther, Kevin.
(2019)
An analysis of Core Competence and Unique Value Proposition as normative entrepreneurship elements.
2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC).
Academic chapter/article/Conference paper
-
Erichsen, Jorgen Falck;
Welo, Torgeir;
Steinert, Martin.
(2019)
On Digitally Capturing Prototypes from Ongoing Early-Stage Product Development Projects: A Technology-Focused Approach to Enabling Research on Prototype-Driven Projects.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-4014-0. Doktoravhandlinger ved NTNU (209).
Doctoral dissertation
-
Erichsen, Jorgen Falck;
Wulvik, Andreas;
Steinert, Martin;
Welo, Torgeir.
(2019)
Efforts on Capturing Prototyping and Design Activity in Engineering Design Research.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Sjöman, Heikki;
Steinert, Ralf Martin.
(2019)
Fixation on premature concept choices - a pitfall of early prototyping?.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Steinert, Martin.
(2019)
Evaluating and optimizing chaotically behaving mobile robots with a deterministic simulation.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Steinert, Ralf Martin.
(2019)
Development and verification of a simulation for leveraging results of a human subjects programming experiment.
arXiv.
Academic article
-
Gerstenberg, Achim;
Steinert, Ralf Martin.
(2019)
The Relevance of Testing in Engineering Product Development - Investigations on a Robot Programming Task.
Procedia CIRP.
volum 84.
Academic article
-
Hann, Richard;
Borup, Kasper Trolle;
Zolich, Artur Piotr;
Sørensen, Kim Lynge;
Vestad, Håvard Nitter;
Steinert, Martin;
Johansen, Tor Arne.
(2019)
Experimental Investigations of an Icing Protection System for UAVs.
SAE technical paper series.
volum 2019-June (June).
Academic article
-
Kari, Raheleh;
Steinert, Martin;
Gaspar, Henrique Murilo.
(2019)
EEG Application for Human-Centered Experiments in Remote Ship Operations.
CENTRIC 2019, The Twelfth International Conference on Advances in Human oriented and Personalized Mechanisms, Technologies, and Services.
Academic chapter/article/Conference paper
-
Kohtala, Sampsa;
Steinert, Martin.
(2019)
From Hand-Drawn Sketching to Laser Cutting - A Proof of Concept Prototype and Pilot Study.
Proceedings of the International Conference on Engineering Design.
volum 1.
Academic article
-
Kriesi, Carlo;
Steinert, Martin.
(2019)
Wayfaring in the Biomedical Sector: A Call for Re-Introducing the Toolmaker.
2019. ISBN 978-82-326-3597-9.
Doctoral dissertation
-
Kriesi, Carlo;
Steinert, Martin;
Marmaras, Anastasios;
Danzer, Claudia;
Meskenaite, Virginia;
Kurtcuoglu, Vartan.
(2019)
Integrated flow chamber device for live cell microscopy.
Frontiers in Bioengineering and Biotechnology.
volum 7 (91).
Academic article
-
Lynch, Matthew Patrick James;
Kamovich, Uladzimir;
Longva, Kjersti Kjos;
Steinert, Martin.
(2019)
Combining technology and entrepreneurial education through design thinking: Students' reflections on the learning process.
Technological Forecasting and Social Change.
volum 164.
Academic article
-
Lynch, Matthew Patrick James;
Kamovich, Uladzimir;
Steinert, Martin.
(2019)
Promoting strategic entrepreneurship at the firm level: a case study on training staff within a large organisation.
International Journal of Product Development.
volum 23 (4).
Academic article
-
Sjöman, Heikki;
Steinert, Martin;
Barnoush, Afrooz.
(2019)
Insights for Prototyping for the Industrial Internet - Iterative Prototyping Loops of Connected Sensor Platforms.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-3755-3. Doktoravhandlinger ved NTNU (2019:76).
Doctoral dissertation
-
Solberg, Fredrik Samdal;
Kohtala, Sampsa Matias Ilmari;
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2019)
A Combined Photoplethysmography and Force Sensor Prototype for Improved Pulse Waveform Analysis.
2019 IEEE SENSORS Proceedings.
Academic chapter/article/Conference paper
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2019)
A comparative study between traditional topology optimization and lattice optimization for additive manufacturing.
Material Design & Processing Communications (MDPC).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2019)
Messing with boundaries - quantifying the potential loss by pre-set parameters in topology optimization.
Procedia CIRP.
volum 84.
Academic article
-
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2019)
Piezoresistive Chopped Carbon Fiber Rubber Silicone Sensors for Shedding Frequency Detection in Alternating Vortex Streets.
2019 IEEE SENSORS Proceedings.
Academic chapter/article/Conference paper
-
Vestad, Håvard;
Kriesi, Carlo;
Slåttsveen, Kristoffer;
Steinert, Martin.
(2019)
Observations on the effects of skill transfer through experience sharing and in-person communication.
Proceedings of the International Conference on Engineering Design.
volum 2019-August.
Academic article
-
Vestad, Håvard;
Steinert, Martin.
(2019)
Creating your Own Tools: Prototyping Environments for Prototype Testing.
Procedia CIRP.
volum 84.
Academic article
Journal publications
-
Dybvik, Henrikke;
Erichsen, Christian Nicolai Kuster;
Steinert, Ralf Martin.
(2021)
Demonstrating the Feasibility of Multimodal Neuroimaging Data Capture with a Wearable Electoencephalography + Functional Near-Infrared Spectroscopy (EEG+FNIRS) in Situ.
Proceedings of the Design Society.
volum 1.
Academic article
-
Dybvik, Henrikke;
Erichsen, Christian Nicolai Kuster;
Steinert, Ralf Martin.
(2021)
Description of a Wearable Electroencephalography + Functional Near-Infrared Spectroscopy (EEG+FNIRS) for In-Situ Experiments on Design Cognition.
Proceedings of the Design Society.
volum 1.
Academic article
-
Dybvik, Henrikke;
Steinert, Martin.
(2021)
Real-World fNIRS Brain Activity Measurements during Ashtanga Vinyasa Yoga.
Brain Sciences.
volum 11 (6).
Academic article
-
Ege, Daniel Nygård;
Auflem, Marius;
Lilleløkken, Oscar;
Steinert, Ralf Martin.
(2021)
User involvement in early-stage design of medical training devices – case of a palpation task trainer prototype.
Design for Health.
volum 5 (2).
Academic article
-
Erichsen, Jorgen Falck;
Sjöman, Heikki;
Steinert, Martin;
Welo, Torgeir.
(2021)
Protobooth: Gathering and analyzing data on prototyping in early-stage engineering design projects by digitally capturing physical prototypes.
Artificial intelligence for engineering design, analysis and manufacturing.
volum 35 (1).
Academic article
-
Funch, Oliver Istad;
Marhaug, Robert Nikolai;
Kohtala, Sampsa;
Steinert, Martin.
(2021)
Detecting glass and metal in consumer trash bags during waste collection using convolutional neural networks.
Waste Management.
volum 119.
Academic article
-
Kari, Raheleh;
Steinert, Ralf Martin.
(2021)
Human Factor Issues in Remote Ship Operations: Lesson Learned by Studying Different Domains.
Journal of Marine Science and Engineering.
volum 9 (4).
Academic article
-
Kohtala, Sampsa;
Erichsen, Jorgen Falck;
Wullum, Ole Petter;
Steinert, Martin.
(2021)
Photogrammetry-based 3D scanning for supporting design activities and testing in early stage product development.
Procedia CIRP.
volum 100.
Academic article
-
Kohtala, Sampsa;
Steinert, Martin.
(2021)
Leveraging synthetic data from CAD models for training object detection models – a VR industry application case.
Procedia CIRP.
volum 100.
Academic article
-
Rørvik, Sigurd Bjarne;
Auflem, Marius;
Dybvik, Henrikke;
Steinert, Ralf Martin.
(2021)
Perception by Palpation: Development and Testing of a Haptic Ferrogranular Jamming Surface.
Frontiers in Robotics and AI.
volum 8.
Academic article
-
Severin, Cecilia;
Danielsen, Jørgen;
Erichsen, Jorgen Falck;
Eikevåg, Sindre Wold;
Steinert, Martin;
Ettema, Gertjan;
Baumgart, Julia Kathrin.
(2021)
Case Report: Adjusting Seat and Backrest Angle Improves Performance in an Elite Paralympic Rower.
Frontiers in Sports and Active Living.
volum 3.
Academic article
-
Tyflopoulos, Evangelos;
Haskins, Cecilia;
Steinert, Martin.
(2021)
Topology-Optimization-Based Learning: A Powerful Teaching and Learning Framework under the Prism of the CDIO Approach.
Education Sciences.
volum 11 (7).
Academic article
-
Tyflopoulos, Evangelos;
Hofset, Tarjei Aure;
Olsen, Anna;
Steinert, Martin.
(2021)
Simulation-based design: A case study in combining optimization methodologies for angle-ply composite laminates.
Procedia CIRP.
volum 100.
Academic article
-
Tyflopoulos, Evangelos;
Lien, Mathias;
Steinert, Martin.
(2021)
Optimization of Brake Calipers Using Topology Optimization for Additive Manufacturing.
Applied Sciences.
volum 11 (4).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2021)
Combining Macro- and Mesoscale Optimization: A Case Study of the General Electric Jet Engine Bracket.
Designs.
volum 5 (4).
Academic article
-
Auflem, Marius;
Bøe, Hans Hagenes;
Erichsen, Jørgen Falck;
Steinert, Ralf Martin.
(2020)
ON PROTOTYPING METHODS TO LEVERAGE NON-RIGID MATERIALS IN THE EARLY STAGES OF ENGINEERING DESIGN.
Proceedings of the Design Society: DESIGN Conference.
Academic article
-
Balters, Stephanie;
Geeseman, JW;
Tveten, Ann-Kristin;
Hildre, Hans Petter;
Ju, Wendy;
Steinert, Martin.
(2020)
Mayday, Mayday, Mayday: Using salivary cortisol to detect distress (and eustress!) in critical incident training.
International Journal of Industrial Ergonomics.
volum 78.
Academic article
-
Blindheim, Jørgen;
Elverum, Christer Westum;
Welo, Torgeir;
Steinert, Martin.
(2020)
Concept evaluation in new product development: A set-based method utilizing rapid prototyping and physical modelling.
Journal of Engineering, Design and Technology.
volum 18 (5).
Academic article
-
Blindheim, Jørgen;
Grong, Øystein;
Welo, Torgeir;
Steinert, Martin.
(2020)
On the mechanical integrity of AA6082 3D structures deposited by hybrid metal extrusion & bonding additive manufacturing.
Journal of Materials Processing Technology.
volum 282.
Academic article
-
Dybvik, Henrikke;
Løland, Martin Poverud;
Gerstenberg, Achim;
Slåttsveen, Kristoffer Bjørnerud;
Steinert, Ralf Martin.
(2020)
A low-cost predictive display for teleoperation: Investigating effects on human performance and workload.
International Journal of Human-Computer Studies.
volum 145.
Academic article
-
Dybvik, Henrikke;
Veitch, Erik Aleksander;
Steinert, Martin.
(2020)
Exploring Challenges with Designing and Developing Shore Control Centres (SCCs) for Autonomous Ships.
Proceedings of the Design Society: DESIGN Conference.
volum 1.
Academic article
-
Ege, Daniel Nygård;
Lilleløkken, Oscar;
Auflem, Marius;
Steinert, Ralf Martin.
(2020)
Dealing with Ecological Validity and User Needs when Developing Simulation Based Training Equipment – Case Study of a Medical Palpation Task Trainer.
Procedia CIRP.
volum 91.
Academic article
-
Eikevåg, Sindre Wold;
Kvam, Andris;
Bjølseth, Magnus Kjærnet;
Erichsen, Jorgen Falck;
Steinert, Martin.
(2020)
DESIGNING AN EXPERIMENT FOR EVALUATING SEATING POSITIONS IN PARALYMPIC ROWING.
Proceedings of the Design Society: DESIGN Conference.
volum 1.
Academic article
-
Hatlem, Leif Arne;
Chen, John;
Dybvik, Henrikke;
Steinert, Ralf Martin.
(2020)
A Modular Research Platform – Proof-of-Concept of a Flexible Experiment Setup Developed for Rapid Testing of Simulators, UIs and Human Physiology Sensors.
Procedia CIRP.
volum 91.
Academic article
-
Heck, Johannes;
Steinert, Martin;
Meboldt, Mirko.
(2020)
Advancing empirical evidence of iteration stereotypes in the fuzzy front end of product development processes.
Procedia CIRP.
volum 91.
Academic article
-
Jensen, Matilde Bisballe;
Steinert, Martin.
(2020)
User research enabled by makerspaces: bringing functionality to classical experience prototypes.
Artificial intelligence for engineering design, analysis and manufacturing.
volum 34 (3).
Academic article
-
Pitsis, Tyrone S.;
Beckman, SL;
Steinert, Martin;
Oviedo, L;
Maisch, Bettina.
(2020)
Designing the Future: Strategy, Design, and the 4th Industrial Revolution—An Introduction to the Special Issue.
California Management Review.
volum 62 (2).
Academic article
-
Steffensen, Torjus Lines;
Kohtala, Sampsa Matias Ilmari;
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2020)
TrollBOT: A Spontaneous Networking Tool Facilitating Rapid Prototyping of Wirelessly Communicating Products.
Procedia CIRP.
volum 91.
Academic article
-
Toscher, Benjamin;
Dahle, Yngve;
Steinert, Martin.
(2020)
Get Give Make Live: An Empirical Comparative Study of Motivations for Technology, Youth and Arts Entrepreneurship.
Social Enterprise Journal.
volum 16 (2).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2020)
Topology and Parametric Optimization-Based Design Processes for Lightweight Structures.
Applied Sciences.
volum 10 (13).
Academic article
-
Vestad, Håvard Nitter;
Kriesi, Carlo;
Steinert, Ralf Martin.
(2020)
Integrating Carbon Fiber Based Piezoresistive Composites for Flow Characterization in In-vitro Cell Research Equipment.
Procedia CIRP.
volum 91.
Academic article
-
Wulvik, Andreas;
Dybvik, Henrikke;
Steinert, Martin.
(2020)
Investigating the relationship between mental state (workload and affect) and physiology in a control room setting (ship bridge simulator).
Cognition, Technology & Work.
volum 22 (1).
Academic article
-
Auflem, Marius;
Erichsen, Jorgen Falck;
Steinert, Martin.
(2019)
Exemplifying Prototype-Driven Development through Concepts for Medical Training Simulators.
Procedia CIRP.
volum 84.
Academic article
-
Barhoush, Yazan;
Erichsen, Jorgen Falck;
Sjöman, Heikki;
Georgiev, Georgi;
Steinert, Martin.
(2019)
Capturing Prototype Progress in Digital Fabrication Education.
Proceedings of the International Conference on Engineering Design.
volum 1 (1).
Academic article
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
First demonstration of a new additive manufacturing process based on metal extrusion and solid-state bonding.
The International Journal of Advanced Manufacturing Technology.
volum 105 (5-6).
Academic article
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
Investigating the mechanics of hybrid metal extrusion and bonding additive manufacturing by FEA.
Metals.
volum 9 (8).
Academic article
-
Blindheim, Jørgen;
Welo, Torgeir;
Steinert, Martin.
(2019)
Rapid prototyping and physical modelling in the development of a new additive manufacturing process for aluminium alloys.
Procedia Manufacturing.
volum 34.
Academic article
-
Brede, Jostein Rødseth;
Lafrenz, Thomas;
Krüger, Andreas;
SØVIK, EDMUND;
Steffensen, Torjus Lines;
Kriesi, Carlo;
Steinert, Martin;
Klepstad, Pål.
(2019)
Resuscitative endovascular balloon occlusion of the aorta (REBOA) in non-traumatic out-of-hospital cardiac arrest: Evaluation of an educational programme.
BMJ Open.
volum 9:e027980 (5).
Academic article
-
Erichsen, Jorgen Falck;
Wulvik, Andreas;
Steinert, Martin;
Welo, Torgeir.
(2019)
Efforts on Capturing Prototyping and Design Activity in Engineering Design Research.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Sjöman, Heikki;
Steinert, Ralf Martin.
(2019)
Fixation on premature concept choices - a pitfall of early prototyping?.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Steinert, Martin.
(2019)
Evaluating and optimizing chaotically behaving mobile robots with a deterministic simulation.
Procedia CIRP.
volum 84.
Academic article
-
Gerstenberg, Achim;
Steinert, Ralf Martin.
(2019)
Development and verification of a simulation for leveraging results of a human subjects programming experiment.
arXiv.
Academic article
-
Gerstenberg, Achim;
Steinert, Ralf Martin.
(2019)
The Relevance of Testing in Engineering Product Development - Investigations on a Robot Programming Task.
Procedia CIRP.
volum 84.
Academic article
-
Hann, Richard;
Borup, Kasper Trolle;
Zolich, Artur Piotr;
Sørensen, Kim Lynge;
Vestad, Håvard Nitter;
Steinert, Martin;
Johansen, Tor Arne.
(2019)
Experimental Investigations of an Icing Protection System for UAVs.
SAE technical paper series.
volum 2019-June (June).
Academic article
-
Kohtala, Sampsa;
Steinert, Martin.
(2019)
From Hand-Drawn Sketching to Laser Cutting - A Proof of Concept Prototype and Pilot Study.
Proceedings of the International Conference on Engineering Design.
volum 1.
Academic article
-
Kriesi, Carlo;
Steinert, Martin;
Marmaras, Anastasios;
Danzer, Claudia;
Meskenaite, Virginia;
Kurtcuoglu, Vartan.
(2019)
Integrated flow chamber device for live cell microscopy.
Frontiers in Bioengineering and Biotechnology.
volum 7 (91).
Academic article
-
Lynch, Matthew Patrick James;
Kamovich, Uladzimir;
Longva, Kjersti Kjos;
Steinert, Martin.
(2019)
Combining technology and entrepreneurial education through design thinking: Students' reflections on the learning process.
Technological Forecasting and Social Change.
volum 164.
Academic article
-
Lynch, Matthew Patrick James;
Kamovich, Uladzimir;
Steinert, Martin.
(2019)
Promoting strategic entrepreneurship at the firm level: a case study on training staff within a large organisation.
International Journal of Product Development.
volum 23 (4).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2019)
A comparative study between traditional topology optimization and lattice optimization for additive manufacturing.
Material Design & Processing Communications (MDPC).
Academic article
-
Tyflopoulos, Evangelos;
Steinert, Martin.
(2019)
Messing with boundaries - quantifying the potential loss by pre-set parameters in topology optimization.
Procedia CIRP.
volum 84.
Academic article
-
Vestad, Håvard;
Kriesi, Carlo;
Slåttsveen, Kristoffer;
Steinert, Martin.
(2019)
Observations on the effects of skill transfer through experience sharing and in-person communication.
Proceedings of the International Conference on Engineering Design.
volum 2019-August.
Academic article
-
Vestad, Håvard;
Steinert, Martin.
(2019)
Creating your Own Tools: Prototyping Environments for Prototype Testing.
Procedia CIRP.
volum 84.
Academic article
Part of book/report
-
Dahle, Yngve Andre;
Nguyen Duc, Anh;
Steinert, Ralf Martin;
Reuther, Kevin.
(2020)
Six Pillars of Modern Entrepreneurial Theory and How to Use Them.
Fundamentals of Software Startups : Essential Engineering and Business Aspects.
Academic chapter/article/Conference paper
-
Erichsen, Christian Nicolai Kuster;
Dybvik, Henrikke;
Steinert, Martin.
(2020)
Integration of low-cost, dry-comb EEG-electrodes with a standard electrode cap for multimodal signal acquisition during human experiments.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Hjorth, Johan Christian Wigen;
Sjöman, Heikki;
Steinert, Martin.
(2020)
The Crux of Integration Prototyping in Complex Environments.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Kohtala, Sampsa Matias Ilmari;
Kaland, Thomas Colin Guo;
Jacobsen, Live;
Aalto, Pasi Olav;
Steinert, Martin.
(2020)
Bringing Reality Back to Virtual Reality - A Collaborative Tool for Multidisciplinary Teams.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Lilleløkken, Oscar;
Ege, Daniel Nygård;
Auflem, Marius;
Steinert, Martin.
(2020)
Proposing a novel approach for testing complex medical task trainer prototypes.
Proceedings of the NordDesign 2020 conference August 11 – 14, 2020 Technical University of Denmark (DTU).
Academic chapter/article/Conference paper
-
Dahle, Yngve;
Dybvik, Henrikke;
Steinert, Martin.
(2019)
A dynamic and a static approach to the business model - Investigating the potential difference in business model focus.
2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC).
Academic chapter/article/Conference paper
-
Dahle, Yngve;
Toscher, Benjamin;
Nguyen Duc, Anh;
Steinert, Martin;
Reuther, Kevin.
(2019)
An analysis of Core Competence and Unique Value Proposition as normative entrepreneurship elements.
2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC).
Academic chapter/article/Conference paper
-
Kari, Raheleh;
Steinert, Martin;
Gaspar, Henrique Murilo.
(2019)
EEG Application for Human-Centered Experiments in Remote Ship Operations.
CENTRIC 2019, The Twelfth International Conference on Advances in Human oriented and Personalized Mechanisms, Technologies, and Services.
Academic chapter/article/Conference paper
-
Solberg, Fredrik Samdal;
Kohtala, Sampsa Matias Ilmari;
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2019)
A Combined Photoplethysmography and Force Sensor Prototype for Improved Pulse Waveform Analysis.
2019 IEEE SENSORS Proceedings.
Academic chapter/article/Conference paper
-
Vestad, Håvard Nitter;
Steinert, Ralf Martin.
(2019)
Piezoresistive Chopped Carbon Fiber Rubber Silicone Sensors for Shedding Frequency Detection in Alternating Vortex Streets.
2019 IEEE SENSORS Proceedings.
Academic chapter/article/Conference paper
Report
-
Blindheim, Jørgen;
Steinert, Martin;
Welo, Torgeir.
(2019)
On Solid-State Deposition of Metal Structures - Conceptualization of a New Additive Manufacturing Method based on Hybrid Metal Extrusion & Bonding.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-4094-2.
Doctoral dissertation
-
Erichsen, Jorgen Falck;
Welo, Torgeir;
Steinert, Martin.
(2019)
On Digitally Capturing Prototypes from Ongoing Early-Stage Product Development Projects: A Technology-Focused Approach to Enabling Research on Prototype-Driven Projects.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-4014-0. Doktoravhandlinger ved NTNU (209).
Doctoral dissertation
-
Kriesi, Carlo;
Steinert, Martin.
(2019)
Wayfaring in the Biomedical Sector: A Call for Re-Introducing the Toolmaker.
2019. ISBN 978-82-326-3597-9.
Doctoral dissertation
-
Sjöman, Heikki;
Steinert, Martin;
Barnoush, Afrooz.
(2019)
Insights for Prototyping for the Industrial Internet - Iterative Prototyping Loops of Connected Sensor Platforms.
Norges teknisk-naturvitenskapelige universitet. 2019. ISBN 978-82-326-3755-3. Doktoravhandlinger ved NTNU (2019:76).
Doctoral dissertation
Teaching
Courses
- TMM4245 - Fuzzy Front End
- TMM4960 - Engineering Design and Materials, Master's Thesis
- TMM4220 - Innovation by Design Thinking
- MM8101 - Engineering Design Research and Scientific Methods/Tools
- TMM4540 - Industrial ICT Engineering Design and Materials, Specialization Project
- TMM4560 - Engineering Design and Materials, Specialization Project
- TMM4935 - Industrial ICT, Master's Thesis