Highlight regarding new update and/or information on Francis-99 second workshop will be available here.
07 Jun: Draft tube outlet pressure measurement location is provided.
21 Jun: Draft tube outlet pressure is corrected in Table 3 and reference height between inlet and outlet pressure measurement is provided.
22 Jun: Decimals levels for turbine inlet dicharge in Table 3 are increased.
22 Jun: Diameter of the inlet pipe, where inlet pressure measurements were performed, is 0.35 m and the corresponding inlet area is corrected.
5 Sep: Pressure data from the draft tube sensors were acquired using piezo-electrict type dynamic sensors. Therefore the data shows only pressure fluctuations.
21 Nov: Workshop program is updated.